Best Ways To Amplify Amp Modellers | FRFR or Guitar Cab? | Thomann
HTML-код
- Опубликовано: 23 июл 2024
- Guitar amp modellers are crazy good and obviously practical too. They don't do one important thing though... amplify your signal. Kris and Guillaume grabbed the Quad Cortex, made a preset and tested 4 awesome ways of amplifying / monitoring yourself. Let us know which one was your favourite in the comments below.
Gear used: tho.mn/jn6lk
Recorded in Presonus Studio One: bit.ly/S1Pro6
Recorded and mixed with Universal Audio: tho.mn/uadx1
Monitors optimised through Sonarworks: tho.mn/sonar
We use Cordial cables exclusively: www.thomann.de/intl/cat_brand...
Interesting bits and pieces:
0:00 Introduction
1:12 Four ways to hear yourself
2:35 How we mic the 4 methods
3:15 Quad Cortex tone going straight into the interface
3:42 1. Guitar amp's power amp + guitar cab
4:36 2. Dedicated poweramp + guitar cab
5:40 3. Going into an FRFR speaker
6:46 4. Going into active PA speakers (wedges)
7:57 Our impression and opinion
13:06 Outro jam
Webshop: www.thomann.de
Facebook: / thomanninternational
Twitter: @thomann / thomann
Instagram: @thomann.music / thomann.music
Pinterest: / thomannde
Visit our blogs:
GER: www.thomann.de/blog/de/
ENG: www.thomann.de/blog/en/
FRA: www.thomann.de/blog/fr/
ESP: www.thomann.de/blog/es/
ITA: www.thomann.de/blog/it/
NED: www.thomann.de/blog/nl/
FIN: www.thomann.de/blog/fi/ 
Видеоклипы
Slow dance in a burning room is the new stairway to heaven
It’s a great song
New. As in 20 years old.
@@pumukliboti why would you say such a thing 🤯
It’s so annoying, I instantly fast forward a video when I hear it lol. Stairway is badass though, will always listen to that 😎
I used to hear stories about guitar stores kicking out customers who play Stair Way to Heaven 😅
Now I gig with the Fender FR-12. I design my tones with it and they translate perfectly into FOH. The knobs are perfect to quick adjust into the stage boominess or harshness, the legs give flexibility, the power gives sound re-enforcement capabilities, the sound dispersion is phenomenal.
It is the best gear I bought for years.
I can’t say you guys really spoke to the most common points people are out there seeking.
I did this similar test and I didn't care for my Revv G20 result. The SD PowerStage works great. FRFR monitor sounds great, and mixing it with a real cab is superb.
straight in to a QSC CP8....Best wedge monitor I have personally ever found. and lightyears better than every dedicated frfr speaker cab I have heard,
qsc cp8 is gold!
I run my live amp modeler into a Mackie Thump PA speaker. It’s so loud you can amplify an entire band mix through it and be louder than a loud drummer. For guitar alone, it sounds absolutely amazing.
having just the QC, this is absolutely the most sense to me. I use in ears but want to be able to have stage volume that can also add other elements in if my IEMS fail for any reason. Buying a cab (even FRFR) feels like just more things to have to hump around which was becoming the issue in the first place 😂
this video is perfect for me. much appreciated
Both guitars sound simply amaaazing 🙏
amazing video concept! great video.
I'm running a Cortex into an FRFR mainly for portability. But I like that I can use the FRFR as my stage monitor and I have control over it without affecting the house sound or relying on the soundguy to get the level to my preference.
Good video. For me personally, the idea of a modeler is 1. Extreme portability and 2. Get access to play around with different amp sims without having to buy a ton of gear. For these reasons, I'd go straight into an FRFR speaker.
The tube amp and pedals would be a totally separate peice of gear that's stationary in one place.
Finally a tiny portable amp like the Spark for travel practice
In midst of putting together that rig now. Have the Helix, buying Tonex end of month as well as an FRFR. Then, I will purchase a 2nd FRFR in 1 - 2 months .. for stereo 🙃🎸🎶🤜🤛🤟
Thanks for the video guys
I have all options available, but I really enjoy running my Helix into the return of my Marshall DSL40cr. As an added benefit, you get to use the amp's resonance and presence controls if need be. I have found that this makes the Helix preamp models shine.
Cnan u tell me how i Can Connect helikoptere or tonex for that matter into amp? I have heard it have to be connected into the fx loop of the amp. But can u elaborate?
I have this setup as well with the Helix Stomp using the 4 cable method into my DSL40CR. I am on the fence about it, b/c what comes out of the Helix vs what the DSL40CR does to color the tone, are very different. I have to do a lot of EQing on the Helix. I also found the resonance and presence controls are hardly noticeable on the DSL40CR. Don't get me wrong, I still like the amp, but I play on my Helix Floor into FRFR more often.
Great video. For me, I use my Tone Master Pro directly connected to my Audio interface (UA Apollo 8) with Cabinet emulation when I want to record my performance in my DAW (LUNA). In that case, I'm monitoring through my Kali L6P studio monitors and it sounds great, really great. I also use my Boss Katana Head 100W as a power amp connected to the Tone Master Pro on the FX Loop 4 left channel (hence mono) when I want to jam or rehearse. In that case, the monitoring is done through my Harley Benton G112+ Thiele Cabinet (Celestion 65W Creamback made in England). I some cases, I use a SM57 to record my performance but I have to say that I prefer to use the first way to do it. The TMP cab emulation is amazing and the acoustic of my home studio is not really good so... To be completely honest, the second method is more satisfying as a guitar player, using a real cabinet is always a plus even though it's hard to explain the feeling. Anyway both ways are good and the Tone Master Pro is an amazing beast. Cheers from France.
I for one, would have really liked to see the wiring/setup for each, accompanied by a discussion, as I am still trying to wrap my head around these “alternative” methods. Thanks.
I had to sell my PA setup and am now plugging my Quad Cortex in to an old Fender Excelcior and it actually sounds awesome
I've been running my Boss GX-100 into the effects return of my BluGuitar Amp1, and then the BluGuitar Amp1 drives a 2x12 guitar cabinet. I copied the patches I created for going to FOH or into a DAW, but then turned off the cab sim on those patches so I can go into a guitar speaker cabinet. To send my signal to FOH I just mike my guitar cabinet the old-fashioned way. It might seem kind of dumb, but it works great for me. I've used mikes like SM-57s to mike guitar amps for decades so I know how to do this and get a great tone coming through the FOH system without having to worry about special IRs or anything else.
As someone else noted, if my GX-100 ever goes down I can just go straight into the BluGuitar amp and still get through the gig.
I am using a boss katana in the acousic channel for monitoring my nux mg 30 and really like it. Also having bass, middle, trebble and presence settings to modify the sound to my preference. But using them mainly in center positions.
In that way, I also have a backup. If the modeler fails.
Here in the video, I most often liked the neuman mic over the head mic, but was positivly surprised by the floor monitor.
Nice video!
I use the Seymour Duncan power stage with a 2x12 barefaced cab with V30’s through an axe fx fm3 and I love it 👌
I’d really like to give the Tonemaster FRFR a go. Looks really cool.
Based on the room mic, the power amp + cab and powered PA sound clearly best to my ears.
I run a HX Stomp XL into a Seymour Duncan Powerstage 170 going into an Orange closed back 2x12 with V30s. Love it.... Since I've gotten my modeler setup I haven't went back to my Revv G20/Pedalboard setup to compare yet. I don't think my modeler setup will ever replace my Revv G20 pedalboard setup, but man this modeler setup sounds wonderful.. What a time to be a guitar player.. lol
Do you use the Stomp's Mandarin cab for direct to FOH?
@@paulschlachter4313 I've only played one small gig with this setup and I didn't run to front of house. I know I can split my signal path to front of house and to a cab simultaneously but I haven't gotten around to trying it yet. 😅
I tried my Orange PPC and it sounded really dark. But then again I had no clue what I was doing back then either. I should try it again. Have you tried a mesa 2x12 with V30s?
I use the Fender FR-12 with my UA Dream 65 and I love it.
Can you tell me if this combination would be good for low volume home use? Have you tried the 10"? One commenter said that the Fender FRFR hisses at lower volumes. Have you experienced this?
I am equally surprised how good yet portable these Class D power amps are. Even on a budget. Kudos to you to avoid promoting Thomann's house brand in this video, however, I currently have a NUX Amp Academy hooked up to a Harley Benton GPA 100. The NUX XLR DI out feeds the FOH with IR, the 1/4 out feeds the GPA 100 without an IR. The GPA monitors out through a Blackstar 2x10 or a Thiele type 1x12 and both monitor signLs are just awesome. Playing feel is retained which is the biggest compliment to make to such non-traditional set up I think. 👍
Great video! its so helpful to see different ways to connect to a speaker. When you are playing through the Fender, the Cab Sim of the Modeler is turned on, right? Thanks
I use the QC through an EVH Stealth 100 on the clean channel through 2 cabs and the sound is crushing. Nothing compares!
I have been doing the power amp in on my amp into my 2x12 and I get the same issue you said, sounds good but need to make some adjustments. It’s a bit of a hassle. I really want to get the FR 12 now and be done with turning on and off cab emulator depending on the situation.
I use a boss Gt 100 multi effects processor and run it stereo out into two Blackstar ID CORE stereo wide 100 watt amps. The spacious stereo wide from the amps give a surround effect and a richness to the effects of the boss processor. I've tried the line out and even used a Marshall amp for the on stage monitor but using the two stereo wide blackstar amps has taken the stereo effect to a new level, so that what I'm using currently.
Running a Boss ME90 into a Headrush FRFR-108. Plenty of low end (almost too much) and it sounds great! I come right out of the headrush output into the PA and it sounds huge.
I used a Marshall 1936 stereo cabinet with a peavey cs200x stereo power amp. Everything was from the daw (boss gt) and it sounded great.
What a great video guys!
8:25 ahh sending different outputs different places. I’m reminded of a chuck berry session where they had an amp for chuck set his way and another amp set up for the engineer … i love having my thunder 99 running my floor wedges from my modeler.
HX Stomp into the poweramp of an old Peavey Bandit 112 combo with Celestion T75. Sounds really good, more than loud enough and the Peavey is dirt cheap second hand.
I matched a dual cab (Helix IR stuff) to the Peavey's speaker sound for direct/FOH - works well.
I use the Powerstage to a 2x12. Sounds great.
Nice video! I'm using a fractal fm3 with the power amp of a bluguitar amp1 through a 2x12. It moves walls😂 the cool thing is that you also have a backup amp on your pedalboard and it's very compact^^
I do this same thing with the helix. I absolutely love it
I'm using an Electro Harmonix Dirt Road Special (solid state combo) for amplifying the sounds coming out of my PC and audio interface. Comparing the signal straight out of my headphones connected to the audio interface with the sound coming out of the EHX setting it up everything at noon you can achieve a pretty similar result to each other.
I’ve the boss GT1000 bigboy. Love the thing. I own one amp and cab for bass. For guitar live I go direct but when there is no personal monitor for me (small gigs) I send one signal to FOH and one signal to the bass amp and cab. Bass amps and cabs are also very full range so this works great. The boss has many output options that will adjust the EQ slightly to work in that chosen setup. There’s an output option that says bass amp with tweeter when choosing that it has great guitar tones from the bass amp. So I can cover guitar and bass with one amp head, cab and modeler and be lightweight, great sounding and consistent with not many compromises imho ofcourse
Hi I’m new to multiprocessor what does going direct in live mean? I’m guessing directly to PA but that’s my question how does it work? Because isn’t PA usually but distant from the stage? How do you make it work? Thank you
I use an hybrid system, analogic pedals in front of a Victory Amp V4 Duchess Amp with Two Notes built in, HX Stomp on send/return. V4 Duchess has 3 out (2 with cabinet emulations and a Speaker 4/8/16 ohm out) and this is my use: XLR direct on Mixer with Celestion 4x12 Creamback emulation, Speaker out direct on a 1x12 cabinet Celestion Creamback loaded, and the Line Out (with the same cabinet emulation) of the pedal on a FRFR monitor. Love it…
Hey, interesting set up - I have the v4 Jack amp - and was thinking of going to 1x12 instead of lugging about a 2x12 cab. But I thought they are rated 95w at 8ohm? So how has the creamback coped as it’s 65w? And do you use the frfr as a monitor instead of iem’s?
@@PaulLawrence1972 hey! The Creamback it’s 65w but in the middle I use a simple Bugera attenuator to choose the volume on stage, AND I use an FRFR with 2 input (and 2 volume pot) to mix the guitar tone with other instruments. So I can hear me from behind (with a good cabinet sound) and from the FRFR in front I can hear the sound I’ll have on stage (on the mix).
i got an "old" firehawk 1500 amp that i use with my QC. works great
I use a modeller pedal that I play through an active speaker/powered monitor. Works flawlessly.
Can you connect the quad cortex directly to active studio monitors my friend?
Great review and awesome talk. A question though - I have an electric guitar that has a piezo pickup as well and I use both magnetic and acoustic sound for my outside gigs as a soloist or in a duo. Is the PA Wedge Speaker or the FRFR cab the best solutions for my setup? (since I can turn off the amp sim in multi-fx anytime to use the acoustic sound directly to the speakers)
Great video! Love your energy and style! Technically i don't understand how you are able to record such clean signal from tube amps without any noise using condenser mics. Maybe a video on that would be great as well or some comments. thanks!
Hey, thanks a lot! It's not a lot to "reveal" about not having noise when recording our amps with those sweet Neumanns. We just never have any serious noise or hiss coming from the amps we are using so the mics can't pick up any noise. Also, we play quite loud in the studio so the signal to noise ratio is great. This means that the gain on the mic preamps can stay low so they don't pick up that quiet background hiss of a guitar rig. Also, we barely play with a lot of drive which of course helps with avoiding loud hiss issues. That's it. :)
Ohh and in this video we used a modeller (which we don't usually do) with a built-in a noise gate. If I'm not mistaking we had that on on a very mild setting. Cheers //Kris
I have several real cabs and 2 pairs EAW passive monitors. I have a rack setup with Carvin TS100 Peavey 50/50. Ada microtube 200. Rocktron velocity. I wanted tube ss and hybrid options. Positives and negatives on all of it
At home I use studio monitors. Live I put it in the effects return of an old Fender Mustang 3 modeling amp. It has a neutral speaker so I can leave the IR's on.
Can you connect the quad cortex directly to 2 active studio monitors?
I already own a Laney AH150 Audiohub. So if I was still gigging [our band is in limbo since lock downs] I'd try using that before considering spending more money on FRFR or power amp alternatives.
Playing for myself at home, my experience has been that the separate tweeter in the frfr cabs makes a noticeably different sound than a traditional cab, and I don’t care for it. Same of course is true of monitors. I finally accepted that for me (good) amp in the room tone is of greater interest than absolutely flat response and I now run into the return of a quilter superblock into a stage right 1x12 and the tone is fantastic. I still use some cab sims to pleasing effect.
Have you tried a high pass filter on the signal out to the FRFR?
my humble opinion: the best way to amplify a modeler is the Laney LFR 112. it basically returns the amp in the room feeling and sounds awesome - crisp and clear and beefy (and quiet). the Fender FR-12 is ok too, but hisses too much for home use (in my opinion). it is quite fine in a band context though.
I have a Laney LFR-112 too and I like it.
Yes..agreed…
It’s rumored they fixed the hiss without acknowledgment on new units.
yeah, I read that too in forum. Kind of lame of Fender to not acknowledge the problem (even denied it), then silently fix it and not offer any help or compensation to those customers who have bought the hissy units. Well, in any case - good for the people who buy it now. It does sound good and the hiss is only really annoying in a silent setting. In a band context, it does not matter.
I didn't hear hiss on the mic in this video. I wonder if they did something to remove it.
I want to use my Valeton GP 200 through active / passive combo with a and a Ch mixer why would I need the Seymour Duncan power stage 200 ? How do I route it , is it a DI BOX I’ve never used one , I also have the BOSS IR 200 which sounds great in videos … not through my Marshall DSL thinking powered stage monitors are my best route
Hi, thank you for the really useful videos that you post. There is though an option for using the Katana as a power Amp that you didnt mention. Connecting to audio interfaces. I bought a 50 gen3 from Thomann a week ago and I am trying to figure out how I can use Katana as a Monitor for my portable iRig HD2, so that I can also use Amplitube when I am practising. The iRig has two options for sending audio, the most suitable for monitoring (according to the manual) is from the headphone out (stereo). So, can I use a 1/8 stereo to 1/4 mono jack that I saw in Thomann to connect my interface to Katana? I mean, that's what power amp in does, am I correct?
ive been running my Tone Master Pro into the power amp in of a hot rod deville. sounds great. I also have the FR12 - it's good but not as good as a tube power stage. Some one should make a power cab thats a couple of 6L6s (no preamp stuff) just for modellers on stage.
Im currently a bedroom player using a spark 40, and thinking of what proper setup to get. Would it make sense to get a small tube combo and a simple modeler pedal? That way you can use the amp as a speaker + its also useful as a standalone amp. And you can dial in your digital tones for use in any scenario. better option than some FRFR thing?
Should have tried the Pedal Baby 100 too, class A/B differs enough from class D that some would prefer it while playing.
On stage, power amp with cabs as backline, DI out with custom IR loaded to pa/monitors.
A 1x12 cab with a neodymn speaker set in ear height will do, propper in ear solutions are still pretty expensieve.
The best way is what you can afford…both rigs are equally good.
I run a fractal fm3 and a tonex
The only people that care are other guitarist.
😢
Thankfully I don't have such problems. My guitar amplifier is also my monitor on stage and I love the sound of it
And I salute you and your rig! Haha! I love the feel of a cranked amp through a guitar cab too much to stop using it. Whatever my back thinks about this, I don't care. 😆 //Kris
I am using my Fractal Axe FX III into a matrix poweramp into a Marshall 4X12 with mixed celestion speakers (V30 and T75)
I am looking into FrFr options as well, but have not found the right one for my needs (high gain player)
Should we apply a 70-5k eq curve on our modeler presets to mimic a guitar cab ... optimizing the FRFR?
nice video, thank you, I mean that clean arpeggios of pink fender is so awesome! nice Guillaume! and even Chris
Interesting video. NIce one.
For my Quad Cortex I use a Palmer Mach 402 power amp in stereo with a Blackstar 2x12 loaded with H-75 Creamback and a CL80 on the dry (ish) side and custom 1x12 CL80 on the wet side. I find the trick to using Class D power amps is getting as much clean headroom as possible therefore go for the loudest you can get (without being loud)! I've got a Peavey Valve power amp, but it's broken. I know it will make the quad come alive when it's fixed.
For masterclasses and demos I go straight into a wee Mackie desk into a Yamaha dxr 8 PA monitor. I can mix my Guitar synth in there and any backing tracks. With a band the DXR8 is just for my synth guitar. Everything gets sent FOH with both rigs.
I personally hate the sound of just going FOH. It's like having a 2D willy! You need something behind you to give it size and meaning.......in audio form of course!
How about the old Mesa 20/20 or other stereo amps there are lots of tube stereo offerings and can be used with a 2x12 or 4x12 wired for stereo/mono
Do you guys think the frfr sounds better than regular celestians cabs?
Is there an FRFR IR?
What I'm saying is, is there an IR or adaptor that can go between the simulator and a regular amp to get the best from it by doing what IR's do, just with sims instead of valves?
How about an acoustic ampli (like acous for instance)?
Since i use electric, classical and acoustic guitars i could use a channel for each of my gears and send them all to a pa if necessary…
I have a PowerCab+ for the rare occasion. Otherwise for my weekly gig I use in-ears to monitor myself from a send from FOH.
JC-40 with multi effects or SC20H with multi effects. Any advice guys? Just for home use. No more gigging. I’m jamming to songs at home.
Can you plug qc into blackstar amped 3 and then through cab?
Is it possible to run it on a regular guitar amp just turn of amp modeller and cab sim. Just use this line out for effects
I use the HeadrusH frfr 112 on my Kemper and Quad Cortex, i am very happy with the sound, but like all the guitarists here we are always looking for something better
Im using a helix floor 4cm into a duel rectifier with a traynor 4 12 green backs. But i kinda want to get the powerstage 200 and just use it with my cab. Thoughts?????
I do 4CM with a Mark V and have also found good results with the PS170 (assume the 200 is similar). The cab is the key and you will likely be very happy. My Helix with the Cali Mark IV model is indistinguishable to my ear when I go through the MV power section and cab from the real circuits.
I also go into a dxr10 frfr and it’s 95% of the way there and certainly good enough in a live mix.
Good stuff!
I’ve recently bought a Boss GT-1000 Core from Thomann. I did, because I was looking for a unit to serve several purposes, of which one is hassle free live performances, meaning not having to carry a guitar amp AND the PA. With that in mind, it would be downright silly to then re-introduce any sort of amp or cab solution. Literally, within this next week I’m going to start rehearsing with the GT-1000, playing directly through the PA, I’m going to be using.
For studio purposes, I’m afraid, I’m still a real amp kinda guy. So, within a few months the Revv D20 and the JTM 20 are going to make their way into my studio, likely through a Harley Benton “hybrid” 2x12.
Yeah it's kinda funny if someone goes for a modeller to have less stuff to carry but then needs a cabinet to hear her/himself anyway... 😆 Best is using in-ear monitoring at rehearsals and on stage if that's an option. But simply using the PA system is equally efficient, that's why we included the wedges in this video. It's such a simple yet great option. Cheers //Kris
👍👍 “not having to carry a guitar amp AND the PA”. Run your modeler direct to FOH for live shows and monitor via in-ears or wedges.
I use the power amp in on my Katana Artist for my UAFX dream 65.
I have a Helix rack and I really expected I would prefer it through the effects return of my tube amps and I didn’t. I use two Headrush units and the updated Helix cabs sound and feel very good. I still love my tube amps but I also love my Helix. I’d like to try the Seymour Duncan power and the new Fender FRFR
Was nimmt man für Boxen für zu Hause, mit der Combo im Club, auf der großen Bühne?
Wo geht der Sound vom Strymon Iridium hin?
Thar U67 is just sooooo good ... my winner
The Duncan power amp did a great job ... real speaker is nice
Aww man, the U67 is by far my fave mix ever. It's perfect for everything. Guitars, vocals, room, classical instruments, acoustic instruments... Cheers //Kris
I like FRFR because it's close to the sound I would send to my audio interface to record. That's one problem the UA ox box has. If you use it as a load box, but then also record direct from the OX box, what comes out of your cab vs what comes line out of the OX sound totally different. The other thing that is easy with FRFR and sounds amazing, is stereo. My Helix Floor stereo effects sound killer in stereo. I run the helix floor, --> Looper --> drum machine --> stereo FRFR. I am a one man band, ha. Its great for practice.
The best sounding is when it was going through the Newman Mike u 67 can you guys elaborate mor on that
Hey guys I’d like to use my TMP as my all in one acoustic /electric /vocal solution for jams and pub gigs
Would the fender FRFR be able to project enough sound or could you recommend a portable pa solution such as ev 30m ??
I’m open to any other suggestions
Hey, I'd definitely go for an active and portable PA speaker for that. EV would be one of the first brands I'd try out. Cheers //Kris
I use a Ritter amp in a 1x12 cab loaded with a Kemper Kone for the Stage
My personal experience : I have played a long time with a Victory Countess V30 MK2 and Friedman Runt 50 in conjonction to a multieffet for reverb an delay (4CM). The setup was great but the problem was that effect loop was sucking the tone due to multiple analog to digital conversion. To avoid that, I have now a Fractal FM9 connected to a power amp and I really like it but I struggled to get the same tube amp feel depending on the power amp type. Tube amp have a lot of energy with the attack and it pushes the air very efficiently. One reason that tube amp players sometimes change their output transformer is to get a punchier sound and output transformers with the help of output tubes are an energy buffer that can deliver a lot when sollicitated. Regarding non tube power amps, I have tried PS700 => the sound is very loud but lifeless and lack of punch. I have read that class D amp we're not good to reproduce this tube amp feel and I definitely confirm that. Not the same attack as a tube amp. I then bought a Orange Pedal Baby which was better to replicate the amp feel. It is solid state class AB amp so a better configuration but it dit only replicate the tube amp feel at bedroom volume not during a gig or stage situation. Now I have a stereo 50 W tube amp Eng 840. I did have to tweak the EQ on the fractal with specific PEQ curves (fractal units are very good at this) to correct the sound as this configuration is colored by the tube amp but have retrieved that energy and tube amp feel. The problem now is that this configuration is heavy. Next step would be to buy a lighter tube power amp. I'm still looking for it.
Could someone help me understand the signal chain when using a power amp and cab. Like what plugs into what? I'm about to buy a kemper stage but all the inputs on the back are a little bit overwhelming.
It's usually pretty simple if you simply want to go from the modeller into a power amp.
The guitar goes into the input of the modeller, then from the main output you go into the input of the power amp. Then from the power amp's speaker output you go into the cabinet. If you want to use it in mono, just use the left output. If stereo, you need two mono power amps or one that's stereo. In that case you go from modeller output left into one power amp and from output right into the other.
All the additional jacks on modellers are for other things (fx loop, alternative inputs / outputs, etc). Cheers //Kris
I just ordered a full range PA speaker from you for exactly this purpose. Since I play guitar and bass I wanted a powered speaker, which saounds great, when I feed it with profiles from my Kemper. I have ordered the EV ZLX 15P.
I use muy Fender fr 12 with my amp and my ox . Works fine too
What’s the best for a bedroom beginner setup? I have an electric guitar and a line 6 helix, what’s the best option to output the audio from the helix??
Assuming you're not looking to just play through headphones, the most practical setup would be an FRFR without the PowerStage. You only need the PowerStage if you plan on running into a regular guitar cab without any type of IR (cab sim), which isn't really necessary if you don't specifically want stage volume for gigging or full band rehearsals. The PowerStage is designed for that relatively specific use case, which doesn't sound like it applies to you.
Lots of information here. Can you run the QC through a valve guitar amp? Whats the disadvantages? .. i don’t really want to replace my ac30 with a FRFR speaker.
You can, of course! It's a bit of an overkill though. The strength of the QC is to emulate amps in an awesome way. If you want to use it with a tube amp and turn its amp simulations off, you're only using its effects essentially.
A good combination would be to go into the power amp of a tube amp to use the full potential of the amp sim of the QC.
So going into the AC30 with the QC amp sim wouldn't sound very natural. I think I'd go for a wedge monitor or an FRFR cab for the QC. If you don't want to do that, maybe just take a few nice pedals for the AC30 and ignore amp modellers. Cheers //Kris
Thanks this is a great video. But i only own a tube marshall combo and a Fender Mustang combo (not tube) what are my options if i dont want to buy a separate cab or poweramp or a frfr or desktop. Can i go direct into the marshall effex loop or infront of the amp? Or maybe if i buy a poweramp and then go into the combo (back of front) or maybe into the Mustang combo? Can you fix that eq problem with/on the poweramp before the effex loop of i e the Marshall combo tube. This is rather confusing when you dont show/explain combos to head into a cab. I really want to buy the headrush. Does this mean i cant use a tube combo? Maybe the Mustang? Therefore is this two worlds that you have to buy so much stuff and restart? Dont get this. Thanks
Hey man, the two best options to use the Marshall combo with the Headrush:
1. Go into the fx loop of the combo -> Guitar goes into the Headrush, you make your presets with pedal and amp simulation but turn off the speaker simulation, then you go into the fx return of the Marshall.
2. The 4 cable method -> Guitar goes into headrush, choose the pedal and fx simulations you want but turn off the amp and speaker simulations, then connect the Marshall input and the fx loop with the Headrush using the 4 cable method (I'm sure that is explained in the manual of the Headrush and you can also read about that on the internet). This way you only use the multi fx for overdrives and effects, all the amp tone comes from the Marshall combo.
Does that make sense to you?
Cheers //Kris
@@ThomannsGuitarsBasses thanks Kris this helps a lot. Can i also use the headrush into the Fender Mustang (i think you class this as a solid state?) or into my Spark first generation biggest amp?
frfr cabs dont need a poweramp? i think that would give me what i'm looking for. i have a torpedo M and some preamps I like as well as strymon iridium. i think this is the way to go for me.
tuBE AMP RETURN İS THE REAL BEAST
I'm very happy with my Harley Benton products. I have the G112A-FR and the GPA-100. I have a couple of questions. How does the GPA-100 compare to the Seymour Duncan? How much louder is the Fender (1000W) than the Harley Benton G112A-FR (100W)? I like that you can use the HB speaker as a wedge.
Actually an FRFR shootout video sounds like a pretty good idea. :) It's on the list of ideas now, thanks! //Kris
@@ThomannsGuitarsBasses you should also include the Spark Cab by Positive Grid
a pair QSC K10.2 behind me on stands facing out for my Axe-Fx III.. I love it!
I use my Fractal AX8 through a pretty neutral solid state rack-poweramp through a 2x12, but I leave all Cab-Sims switched on. Works best.
Rename it😂 and btw happy new year guys!
If I’m just a bedroom player what is the best way for me to monitor my modeler besides headphones without aggravating my family? Sorry, I’m new to all this modeling stuff.
Do you plug in directly in the input of tube amp? (after disabling cab Sim)
No, you plug into the effects return.
Will this work with a Line 6 Catalyst?
What a missed opportunity to show off the Harley Benton GPA-400, I use it for rehearsal and it's great! plus you have the possibility to go stereo and that's a big plus!
Hey, true, next time we can do a power amp shootout for modellers. :)
We took the Seymour because a lot of people know it and love it, it has pretty much become a reference product for compact power amps. //Kris
@@ThomannsGuitarsBassesThat would be an awesome video! Thanks!
I can’t wait for that 👍
I usually go in the return of the amp, and yeah, true, sounds a bit different, but when I go in rehersal room it's so much easier
Rename!! Love the boomer idea
1:15 ideally, you'd turn off the power amp simulation if you're using a real tube power amp. I don't think QC allows this, but Helix has pre-amp only models for each of their amp models. This is probably why the D20-amped tone sounded the most different from the DI tone...
I dont't play gigs, i use a little tube-amp at home and my modeller with 4cbl method. this way i have presets with my real Amp, and other presets with the amp models out of my Ampero Stomp II
Could you explain the 4 cable method? Thanks!
@@joebranston6330 check Out google pictures of 4 cable method, there are good diagrams which explain it. Or just RUclips for some nice tutorials
For gigs I just plug it straight into the PA, for busking I plug in a regular Bluetooth speaker into the headphones jack
Tech 21 Power Engine 60...I use two to go stereo...
I would say if you gig with a modeler, setting up your presets as if would only be going through PAs is the best bet.