I’m going through something similar at the moment and I’ve found this video to be really inspiring. I am 100% undoubtedly going to pay someone to do this job lol. THANK YOU!
I am solving the exact same problem right now. I watched 2 other videos but yours has the most info. I had to dig to find this though and luck of the draw I did. You might want to redo the title so it is easier to find because you did a great job and it helps a lot. Thanks for the great vid.
Looks like a royal PIA, always hated working on FWD vehicles myself. Good thing you noticed the leak before it ran low on oil. Could have been worse I guess, that's what I tell myself to make it through jobs like this..
My 2005 Hyundai Tucson has the same 2.0 engine as does my 01 Elantra. Got the Elantra all ship shape, working on the Tucson now. It’s a lot of digging in there for sure.
When you said that you were going to have to pull it apart "Yay" I felt for you lol. It reminded me of a time when my timing belt broke on my Chevy Vega. It was Christmas eve when most stores were closed and I was just going home for our family Christmas get together. I hitched hiked to a place that happened to have one in stock and luckily had my tools in the car. I changed it in the dark under a street light and finally got home to my parents after my one and a half hour drive at around 2:00 AM. Some jobs you just don't want to do but have to. Yay!
+Dave Brittain Yeah, I wasn't looking forward to this, and I'm still not excited about the rest of it. It doesn't help that the garage is full, and it's cold enough to have snow flurries... I HATE being cold....
+Jo Daddy's Garage You ought to try working outside here in Canada. We have had a very mild winter though I will say with barely any snow at all here near Toronto. Years ago I was forced to change my in tank fuel pump on my 88 Honda Civic right after a snow storm. The snow around the car was about 22 inches deep and I did not have a garage at the time. As much as cars can be such a pleasure they can be a real pain too!
Chasing a leak in the same area in a 2006 Sportage, but it's a 6 cylinder. I pulled the oil dipstick tube out to see if the oil was coming from there and now I can't get the tube back in and there is a lot of oil. I may be faced with similar issues.
feel your pain, had an 03 tiburon v6 that had the alternator die on, had to remove the one half shaft, a control arm and some other bs to get to it, all in all it was damn near a full days work. then at 99k the timing sprocket (reluctor ring) inside the engine grenaded itself. put a new to me engine in it and sent it on its way, last foreign car I ever owned.. bought new in june '02 sold sept '08 with a different motor. sad, sad. can't wait to see part 2
Hi. It's been a while since I commented Though I have been watching all your videos. A friendly warning ! I would recommend you change the timing belt has a precaution. Some if not all of these engine's are interference type's If the Timing belt breaks the pistons hit the valves, Causing bent valve's, damage to pistons,cracked head, One or all of these. Also a good ideal to check and replace the Idler/ tension-er.if needed. I feel for you, Been there All my best. Bobby
@@JoDaddysGarage probably the easiest timing belt change known to man when these engines are inside the hyundai accent. Take off the front passenger wheel and then the plastic piece inside the wheel well on the engine side.
That engine screamed "hyundai beta" when I saw it. Like the 2000-2006 accent engine. I'm getting to the point of looking at the top and knowing exactly what type it is.
HI had the bottom timing cover spat out gasket making it the problem? not the front crank seal? Great Job you done it must have tested your patience somewhat
I am having the same issue in Kia Sorento 2012 LX. It is a so complicated problem. How many days did you work on your repairing? How much cost for the parts did you spend?
Hii i have a Kia Sportage diesel 2011. There is a oil leak from a horse and can see its spreading around the turbo. Um not familiar with these mechanical words. Wat would u think. Wat would be the problem. Pls help.
Hi my name is Carrie I took my car to a garage and they fixed something that had to do with the timing chain because my car likes to shut off by itself or it won't start right back up when I turn it off but the problem is I have a big oil leak in the garage is telling me that it's the front main seal and I don't know what to do because I don't have the money they're charging me to fix it I'm so stressed out
Nothing is easy on Kia Hyundai Rondo's Carens specially if working at ground height with just stand jacks and axle stands. 2 pairs of hands sometimes help but the design is crap from a mechanic's point of view on Kia Hyundai. Plus rust and bolts over-tightened and bad bolt choice by manufacturer cause numerous headaches. These vehicles can be repaired by magicians! I can name 4 jobs on my D4EA 2.0L Diesel that require so much dismantling a 4 hour job can take 4 days
Авто/Мото
![GEEK TIMË [OFFICIAL AUDIO]](http://i.ytimg.com/vi/ry-6RvkH880/mqdefault.jpg)
![BRASIL vs. PERÚ [4-0] | RESUMEN | ELIMINATORIAS SUDAMERICANAS | FECHA 10](http://i.ytimg.com/vi/tbyOJKXfQnI/mqdefault.jpg)
I’m going through something similar at the moment and I’ve found this video to be really inspiring. I am 100% undoubtedly going to pay someone to do this job lol. THANK YOU!
I am solving the exact same problem right now. I watched 2 other videos but yours has the most info. I had to dig to find this though and luck of the draw I did. You might want to redo the title so it is easier to find because you did a great job and it helps a lot. Thanks for the great vid.
What title do you recommend?
Great mechanic there! One lucky daughter to have a dad who can do it.
Looks like a royal PIA, always hated working on FWD vehicles myself. Good thing you noticed the leak before it ran low on oil. Could have been worse I guess, that's what I tell myself to make it through jobs like this..
My 2005 Hyundai Tucson has the same 2.0 engine as does my 01 Elantra. Got the Elantra all ship shape, working on the Tucson now. It’s a lot of digging in there for sure.
When you said that you were going to have to pull it apart "Yay" I felt for you lol. It reminded me of a time when my timing belt broke on my Chevy Vega. It was Christmas eve when most stores were closed and I was just going home for our family Christmas get together. I hitched hiked to a place that happened to have one in stock and luckily had my tools in the car. I changed it in the dark under a street light and finally got home to my parents after my one and a half hour drive at around 2:00 AM. Some jobs you just don't want to do but have to. Yay!
+Dave Brittain Yeah, I wasn't looking forward to this, and I'm still not excited about the rest of it. It doesn't help that the garage is full, and it's cold enough to have snow flurries... I HATE being cold....
+Jo Daddy's Garage You ought to try working outside here in Canada. We have had a very mild winter though I will say with barely any snow at all here near Toronto. Years ago I was forced to change my in tank fuel pump on my 88 Honda Civic right after a snow storm. The snow around the car was about 22 inches deep and I did not have a garage at the time. As much as cars can be such a pleasure they can be a real pain too!
Chasing a leak in the same area in a 2006 Sportage, but it's a 6 cylinder.
I pulled the oil dipstick tube out to see if the oil was coming from there and now I can't get the tube back in and there is a lot of oil. I may be faced with similar issues.
feel your pain, had an 03 tiburon v6 that had the alternator die on, had to remove the one half shaft, a control arm and some other bs to get to it, all in all it was damn near a full days work. then at 99k the timing sprocket (reluctor ring) inside the engine grenaded itself. put a new to me engine in it and sent it on its way, last foreign car I ever owned.. bought new in june '02 sold sept '08 with a different motor. sad, sad. can't wait to see part 2
Where were you able to get the diagrams you have
From a site called all data
Hoped to check connecting rod oil clearance this year but I see it's impossible to get oil pan removed without getting out subframe :/. So bad...
Man what a pain in the rear!
great video. this is the same engine as the 2.0 hyundai tucson. worked great thanks!
Yep, the engine the g4gc theta 2. They were made between 2007-2010. I have one in my 2010 Elantra
Hi. It's been a while since I commented Though I have been watching all your videos. A friendly warning ! I would recommend you change the timing belt has a precaution. Some if not all of these engine's are interference type's If the Timing belt breaks the pistons hit the valves, Causing bent valve's, damage to pistons,cracked head, One or all of these. Also a good ideal to check and replace the Idler/ tension-er.if needed.
I feel for you, Been there
All my best.
Bobby
+Bobby Tectalabyss Thanks for the info./advice. I plan to get a timing belt kit and replace it.
+Jo Daddy's Garage You are very welcome. Though I am looking forward to part two I am sure your Not !.
All my very best.
Bobby
@@JoDaddysGarage probably the easiest timing belt change known to man when these engines are inside the hyundai accent. Take off the front passenger wheel and then the plastic piece inside the wheel well on the engine side.
Not for the faint of heart.
That engine screamed "hyundai beta" when I saw it. Like the 2000-2006 accent engine. I'm getting to the point of looking at the top and knowing exactly what type it is.
HI had the bottom timing cover spat out gasket making it the problem? not the front crank seal?
Great Job you done it must have tested your patience somewhat
I did a second video on this. I think it was the oil pump seal.
thank you I did find second half
a big job well done!
On the kia sorentos its usually the oil pressure switch a $12 part causes a stress headache
My kia sorento suddenly oil comes out, how to fix it ?? 😭
What is the procedure to remove the crankcase?
wow..what a time comsuming job
I am having the same issue in Kia Sorento 2012 LX. It is a so complicated problem. How many days did you work on your repairing? How much cost for the parts did you spend?
It took me 2 days. I don't remember what I paid for parts, but it was less than $50 I'm sure.
wow what a pain in the butt later look forward to part 2
+265chevy I'm not... :o)
Hii i have a Kia Sportage diesel 2011. There is a oil leak from a horse and can see its spreading around the turbo. Um not familiar with these mechanical words. Wat would u think. Wat would be the problem. Pls help.
I’m not familiar with these. Sorry.
@@JoDaddysGarage its ok. Thanks for the reply ❤️
Lets get this oil leak fixed so we can start working on the CAMARO'S :)
+ELSDP-45 It's finally fixed. Video to follow. Gotta get the current Mustang done first!
i have same car same problem but it sounds funny did this happen to you as well?
It never got noisy.
What was the exact problem?!
Here's part 2. It shows the problem. ruclips.net/video/jnJQKyEgXHc/видео.html
I wish you could fix my kia suv
Does anybody know where you can download a repair PDF manual for a 2010 sportage diesel.
I have a 2002 kia sportage rear wheel drive i just had to.put 3quarts of oil in it in wondering where the oil.is going
Hard to say. Anything on the ground?
@@JoDaddysGarage i,m going to.check it out tonight
Hi my name is Carrie I took my car to a garage and they fixed something that had to do with the timing chain because my car likes to shut off by itself or it won't start right back up when I turn it off but the problem is I have a big oil leak in the garage is telling me that it's the front main seal and I don't know what to do because I don't have the money they're charging me to fix it I'm so stressed out
Did they have the cover off to do the chain repair? Was it leaking before they did that?
@@JoDaddysGarage no it was not leaking before
@@carriehalsey2443 I would say the shop messed things up. I doubt they will agree though.
@@JoDaddysGarage yeah I know they won't
Hi clear oil leak on 2005 Kia Sportage leftside
Thank you for the video awesome
Nothing is easy on Kia Hyundai Rondo's Carens specially if working at ground height with just stand jacks and axle stands. 2 pairs of hands sometimes help but the design is crap from a mechanic's point of view on Kia Hyundai. Plus rust and bolts over-tightened and bad bolt choice by manufacturer cause numerous headaches. These vehicles can be repaired by magicians! I can name 4 jobs on my D4EA 2.0L Diesel that require so much dismantling a 4 hour job can take 4 days
would have been easier just to take the engine out and rebuild it where leaking
Might as well do a complete overhall. Kia lousy engineering design
2006 موديلها تم البيع
Valve cover gasket bro
Nope. Wish it was that easy.
Jo Daddy's Garage really damn
Is 2012 Kia sportage lx awd a good car?
KIA has been getting better and better. It should be a good car.
KIAs are made by Hyundai.
Jesus watch over your baby angel
سباب الدونز في كيا سبورتاج ١