It really has all the features I need but sometimes it doesn't show the internal resistance correctly and I think it's because of the sliders. Thank you Brother🙂🤝
Worth recommending: Authentic Capacity Assessment with All 8 Slots Engaged, by conducting a charge-discharge-recharge cycle, the authentic capacity of the battery is assessed.
Thank you for your suggestion and interest. We are pleased to inform you that we are currently developing a new product set to be released in April. This product will feature Li-FePo4 battery charging capabilities and the ability to measure the actual capacity of the battery. However, the customization of the charging cutoff voltage is not currently included in our design. We would love to hear more about your considerations and requirements regarding the customization of the cutoff voltage. If you could share your thoughts, we will forward your feedback to our engineering team for further consideration.@@AntonChiseliov
@@XTAR_Hazel please make customized voltage cut off and to customized top off current and for mini 4wd hobbyists for nimh batteries. Today only powerex and skyrc can push exceed 1100mah for pink fujitsu 950mah with 0,1-0,2 A.
Are you sure it discharges to 2.50V? The VC8 goes down to 2.75V and the manual says nothing about it, I had to measure it myself. The 4 slot chargers only go down to 2.80V or 2.85V
I test this charger, for the Grad mode, the mAh increase the number but the battery icon decrease, is it faulty? Here is a video I took showing on CH1,2,3,4,7 & 8. I do not understand why the mAh increase but the battery icon decrease.
In Grad mode, it first charges the batteries to 4.2V and after it is fully charged, it starts measuring its capacity by discharging with a constant current of 300mAh. And as soon as the voltage drops to a certain level, it stops discharging and starts charging it to 4.2V, and as soon as it says done, it means that the capacity has been measured. And you have to remember or write on the battery.
@@ErCanEverything ruclips.net/video/IhTurdp1N58/видео.html Thank you for the information. Can you help to see the video that I have uploaded to RUclips for my charger. I do not understand why the battery level decrease but the mAh number increase.
@@ErCanEverything When it is showing ChG for CH5 & 6, the battery level increase, it is understanding because it is charging. But after that when the ChG finish and replace with mAh, the number increase. Will it be that it is showing the mAh amount been discharge from the batteries and that why the number is increase…Or if it show the text for “DCG” as a representative for discharge maybe more understanding together with the battery level decrease
Thanks for you Watching and That Good ❤❤❤
C'est un bon chargeur 👍👍
Excellent tool 🤩
It has all the functions you need to do with batteries 👏, Great job Xtar.
Nice review Brother!
It really has all the features I need but sometimes it doesn't show the internal resistance correctly and I think it's because of the sliders.
Thank you Brother🙂🤝
Worth recommending: Authentic Capacity Assessment with All 8 Slots Engaged, by conducting a charge-discharge-recharge cycle, the authentic capacity of the battery is assessed.
I would really like to see a Li-FePo4 charging capability (LFP123 16340) and customizable charging final voltage.
Thank you for your suggestion and interest. We are pleased to inform you that we are currently developing a new product set to be released in April. This product will feature Li-FePo4 battery charging capabilities and the ability to measure the actual capacity of the battery. However, the customization of the charging cutoff voltage is not currently included in our design.
We would love to hear more about your considerations and requirements regarding the customization of the cutoff voltage. If you could share your thoughts, we will forward your feedback to our engineering team for further consideration.@@AntonChiseliov
@@XTAR_Hazel please make customized voltage cut off and to customized top off current and for mini 4wd hobbyists for nimh batteries. Today only powerex and skyrc can push exceed 1100mah for pink fujitsu 950mah with 0,1-0,2 A.
Are you sure it discharges to 2.50V? The VC8 goes down to 2.75V and the manual says nothing about it, I had to measure it myself. The 4 slot chargers only go down to 2.80V or 2.85V
احب فيدواتك جميله جدا من تغاصيل ودقة وكل شيء متقن
Thank you my Friend🙏😊🤝🤝🤝
Is it better than the Opus BT-C3100? Thanks for your review.
👍👍👍👍👍
I test this charger, for the Grad mode, the mAh increase the number but the battery icon decrease, is it faulty?
Here is a video I took showing on CH1,2,3,4,7 & 8. I do not understand why the mAh increase but the battery icon decrease.
In Grad mode, it first charges the batteries to 4.2V and after it is fully charged, it starts measuring its capacity by discharging with a constant current of 300mAh. And as soon as the voltage drops to a certain level, it stops discharging and starts charging it to 4.2V, and as soon as it says done, it means that the capacity has been measured. And you have to remember or write on the battery.
@@ErCanEverything ruclips.net/video/IhTurdp1N58/видео.html Thank you for the information. Can you help to see the video that I have uploaded to RUclips for my charger. I do not understand why the battery level decrease but the mAh number increase.
@@ErCanEverything When it is showing ChG for CH5 & 6, the battery level increase, it is understanding because it is charging. But after that when the ChG finish and replace with mAh, the number increase. Will it be that it is showing the mAh amount been discharge from the batteries and that why the number is increase…Or if it show the text for “DCG” as a representative for discharge maybe more understanding together with the battery level decrease
Cool!
How much price this product and how to buy
The order links are in description. Only the VC8S charger costs $59.90 but with the 45W adapter it costs $75.90
Is this better than nitecore ums4 charger