Nice work. That rapid down for the bottom chamfer caught me off guard! Always fun watching other peoples work and not knowing whether it's going to rapid or feed lol
I like it, here's a guy turning a 20'' od part, (aka bigger than most youtube lathes can turn) and he's holding it in a ''smaller'' chuck clamped in a large chuck , .......just how 😎 is that?
Chris do you use conversational programming on your lathe if so is that the reason for grooving in z- direction one way since it's a button tool?I use fanuc conversational on my lathe but doesn't give option of feeding both ways when grooving a sheave or pulley hence you don't want to wear one side of the insert which is what I see in your video as well.
Yes, most of my programming is done by hand with FANUC conversational programming and you're right, it won't let you cut both ways. But at least you can do all the tangent points on the machine without a computer/ Mastercam.
If you're working with a button insert to clean out the minor diameter of that pulley, why not just go back and forth, instead of cutting in 1 dir only?
Siema i w końcu pokazał inną maszynę te otwory jak mniemam do odchudzenia wagi ,otwór wewnątrz to pod panewke bo raczej nie pod lorzysko cus mały (pokazuj też inne maszyny będzie fajniej ) odnośnie materiału to jakiś miętkawy wiury bardziej białe i więcej dymu czyli robota pali się w rękach ......
No tak jak to mówią, robota jest na wczoraj. Materiał 1045 żeby większą twardość wyciągnąć przy hartowaniu rowka. Nagrał bym coś z innych maszyn, ale jak zacznę łazić po zakładzie to mnie wywalą z roboty.
@@ChrisMaj Wiem coś o tym jak robiłem przy turbinach miałem być w swoim boksie anie szfędać się po zakładzie ale i tak wlazłem wszędzie i widziałem wszystko polak potrafi ....
Dave Mcmasters you do not want to turn in the opposite direction under heavy loads as the carriage may be lifted from the bedways due to the tool pressure.
Nice work.
That rapid down for the bottom chamfer caught me off guard! Always fun watching other peoples work and not knowing whether it's going to rapid or feed lol
I like it, here's a guy turning a 20'' od part, (aka bigger than most youtube lathes can turn) and he's holding it in a ''smaller'' chuck clamped in a large chuck , .......just how 😎 is that?
Great vlog, like the chute under the tool 👍 Thanks for sharing.
Stay safe all.
Excelente vídeo amigo chris y muy bonitas poleas saludos amigo 👍🏾👍🏾
Nice work as always!
КЛАСС чётко отработано
素晴らしい仕事だと思います。
Chris do you use conversational programming on your lathe if so is that the reason for grooving in z- direction one way since it's a button tool?I use fanuc conversational on my lathe but doesn't give option of feeding both ways when grooving a sheave or pulley hence you don't want to wear one side of the insert which is what I see in your video as well.
Yes, most of my programming is done by hand with FANUC conversational programming and you're right, it won't let you cut both ways. But at least you can do all the tangent points on the machine without a computer/ Mastercam.
Nice work 👍🏻 what kind of control does the machine have?
Almost all of our machines have a FANUC controls.
If you're working with a button insert to clean out the minor diameter of that pulley, why not just go back and forth, instead of cutting in 1 dir only?
Siema i w końcu pokazał inną maszynę te otwory jak mniemam do odchudzenia wagi ,otwór wewnątrz to pod panewke bo raczej nie pod lorzysko cus mały (pokazuj też inne maszyny będzie fajniej ) odnośnie materiału to jakiś miętkawy wiury bardziej białe i więcej dymu czyli robota pali się w rękach ......
No tak jak to mówią, robota jest na wczoraj. Materiał 1045 żeby większą twardość wyciągnąć przy hartowaniu rowka. Nagrał bym coś z innych maszyn, ale jak zacznę łazić po zakładzie to mnie wywalą z roboty.
@@ChrisMaj Wiem coś o tym jak robiłem przy turbinach miałem być w swoim boksie anie szfędać się po zakładzie ale i tak wlazłem wszędzie i widziałem wszystko polak potrafi ....
👍👍👍💪🔥
Is that for something in the water?
It's for a overhead crane.
Why not flip the lathe tool upside down and run spindle other way?
Cause you don't run tools upside down on this lathe, especially for rough turning.
@@ChrisMaj ok thanks for responding. Just thought it would help with the chips flying everywhere
Dave Mcmasters
you do not want to turn in the opposite direction under heavy loads as the carriage may be lifted from the bedways due to the tool pressure.
Hezké,ale s chybami,pozorně se podívej na mé staré video.Používám tam G4 S0,5 a nerezonuje mi to.
Kolikrát se vrátíte k tomuto starému filmu?
@@ChrisMaj dokud ho nepřekonáš.
@@StanislavPacourek Dělám věci svým způsobem, děláte věci způsobem, který je k tomu vše.
Co się zaclo bo nima filma cyrzby wirus atakuje pozdro ...
Jak narazie wszystko w porządku, tylko jakoś nie było nic ciekawego do nagrania.
@@ChrisMaj w robocie swiruja roboty z tad do tamtad albo jeszce wiecej doczerwca nie wylize z tatar i oby tak dalej chumor wmiare motywacja spoko ...
Nice job Cris!!!