MERCEDES W204 DOOR LOCK ACTUATOR REPLACEMENT REMOVAL C200 C250 C300 C350 C220 C260
HTML-код
- Опубликовано: 9 мар 2018
- MERCEDES W204 DOOR LOCK ACTUATOR REPLACEMENT REMOVAL C200 C250 C300 C350 C220 C260 C280 2008 2009 2010 2011 2012 2013 2014 2015
► Our Website: mechaniclifestyle.com
In this video we will demonstrate how to remove and replace front door lock actuator on Mercedes W204 c250. This video might be helpful on:
2008 Mercedes Front Door Lock Actuator Removal Replacement W204 C200 C220 C250 C300 C350 C260 C280
2009 Mercedes Front Door Lock Actuator Removal Replacement W204 C200 C220 C250 C300 C350 C260 C280
2010 Mercedes Front Door Lock Actuator Removal Replacement W204 C200 C220 C250 C300 C350 C260 C280
2011 Mercedes Front Door Lock Actuator Removal Replacement W204 C200 C220 C250 C300 C350 C260 C280
2012 Mercedes Front Door Lock Actuator Removal Replacement W204 C200 C220 C250 C300 C350 C260 C280
2013 Mercedes Front Door Lock Actuator Removal Replacement W204 C200 C220 C250 C300 C350 C260 C280
2014 Mercedes Front Door Lock Actuator Removal Replacement W204 C200 C220 C250 C300 C350 C260 C280
2015 Mercedes Front Door Lock Actuator Removal Replacement W204 C200 C220 C250 C300 C350 C260 C280
Products used in the video:
► Screwdriver set: amzn.to/2DLqzWw
► Panel Removal Tool: amzn.to/2EfKSZa
► Needle Pliers: amzn.to/2CXp5TW
► Rivet Gun: amzn.to/2GYaNoj
► Power Screwdriver: amzn.to/2FRMARd
► Drill: amzn.to/2FQBzzL
► Drill Bits: amzn.to/2CVI7Kh
► OUR MAIN CHANNEL: bit.ly/2ad33QG
► BMW E46 ZHP PROJECT bit.ly/2g8tOa9
► 2013 GT86 Project Playlist: bit.ly/2dz4xY1
► 2015 Ford Fiesta ST BUILD Playlist: bit.ly/2a59UKp
♦♦♦ Cameras & Gear Used For This Video ♦♦♦
•Cameras
Panasonic Lumix FZ300
amzn.to/2BNWtNA
•Tripod
Polaroid 72-inch
amzn.to/2iVTmP4
•Microphone
Polaroid Pro Video Condenser
amzn.to/2krpSsA
•Light
NEEWER 160 LED CN-160 Dimmable
amzn.to/2jjg9Bd
•Comuter for editting
Lenovo ideapad 310
amzn.to/2kqUNFl
♦♦♦ Other Equipment and Gear that I use ♦♦♦
•Camera
Sony HD Video Recording HDRCX405
amzn.to/2jk8nqB
•GoPro HERO5 Black
amzn.to/2ktNKfj
•Extra Computer For Editting
Lenovo Ideapad 510
amzn.to/2ktOuB7
► Like Us on FACEBOOK: / worldmechanicsofficial...
► LIKE & SUBSCRIBE for MORE DIY VIDEOS that could SAVE YOU BIG $$$$$$$ !!!
This is not a sponsored video. Everything is purchased by us!
The video is meant for entertainment purposes only. Do not Attempt!
AMAZON ASSOCIATES DISCLOSURE
Auto Repair Guys is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com
*Disclaimer
We, Auto Repair Guys, are not responsible for property damage or injury incurred as a result of any of the information contained in this video. Information given in this video does not guarantee the desired outcome. Any injury, damage or loss that may result from improper use of the tools, equipment, or the information contained in this video is the sole responsibility of the user and not Auto Repair Guys. 
Авто/Мото
⛐ Check out our Garage to see what tools we use and recommend:
www.amazon.com/shop/worldmechanics
⛐ Subscribe and hit the notification bell by the subscribe button for new videos: ruclips.net/user/AutoRepairGuys
⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys
😂
By posting these video's, you have no idea how much you're helping other people. Nice video's and keep them coming!!
Riley Banks you’re absolutely right
If you got paid one dollar for every time you said “okai” you would be a millionaire.
😂😂 ok was the only word I understood
This was very helpful for me replacing my lock actuator on my GLK 350. Essentially everything was the same. It is just a pain to have to buy a big rivet gun for reassembly. Thanks very much for posting the video.
Right so watching your vid has moved my thoughts from “yeah I could do that”…..to “nope, garage”. Thank you though, saved me a lot of time!!!! Keep up the good work 😊
I,m doing one today, almost finish so far 1.5 hour and probably another 1.5 hour to go. Mercedes gives only 1.3 hour to do this job....only on lala land as you know. I did wach your video for guidance and found it very helpful . Thanks!!
Great reference video when I worked on my 2015 ML350. THANK YOU!
Well done. Thanks for the help. Great video!
1:30 plastic rivet removing-
1) pull out central blocker
2) turn central blocker 90°
3) push blocker back to the rivet
(Turned 90°)
4) remove whole plastic rivet easy without break that.
Thanks for the help. Great video!
Great tutorial. Very detailed!!
Hopefully this will work with the 2008 model. Great help 🙏 many thanks
Thank you very much for the information.
Is that the same part number for w204 c300 with keyless entry option?
Why couldn't they use screws instead of rivets to construct the door panel?
seriously. i just used rivnuts to put everything back together.
@@velocity211 Which size rivnuts did you use please?
@@chriscunningham1722 m6x1.0
Great video with detailed information. Thank you!
Really nice explanation and doing well work
Drinking game; Every time he says "Okay", you take a shot..
My door lock has packed up today, I'm so not looking forward to this. Thanks for the video, at least now I know what I'm facing
Just replaced my door actuator, a few tips:
-- No need to remove the window motor.
-- the square clip 1:25, after pulling out the plug using a plier, turn the plug 90 degree and RE -INSERT it. then the whole clip comes out in one piece.
-- After removing glass, leave the glass holders in the middle of the door.
Plz let me know the rivets size I'm struggling to find out. ?
Thnks
Rivet size for while trim?
Thanks for the help.
Thank you for sharing this video it help me a lot, the only problem that I see is the removal of the lock from the panel
Will this fix ac vent to allow it to blow air? How do I know which door.
I love watching your videos and helps me work on my C300 all the time, great work guys and well explained !! ❤️
so good thanks
Very good video thank you I have one to do 😩😩😩😩
Do you have a link for the actual part that is needed? 2010 C300 3.0L
This was one of the toughest things I’ve done. It took me twice to get it right. I used screws in place of the rivets. Nuts and bolts to holt the lock mechanism in place. I never did get the wire up to the door handle. No light. I used superglue where clips broke. In all, I spent about 8 hours on this. Horrible job. I’ll pay next time. However, this video saved my butt and for that, thanks so much for making it.
No need to remove the motor for the Window. It can happen very easy that the opposite part comes lose and then you get the steel-rope tangeled. It is quite hard to get it back in place since the springs are under heavy load.
Ok...ok...ok😂you do a grate job...
1:32 you do it wrong, you maybe damage it *(like you do)
1.Pull the clip
2. Turn the clip 90 degree!
3. stick it back in, it will open the internal locks!
4. pull the complete part by pullig on the clip again. Done
DRINKING GAME, EVERY time he says OK, take a shot!!!
What a job..
Hi my door on my c class has locked it self shut i cant open it even tried plugging computer into it still no luck any other way i could get the door opeen ?
nice video
Can you do a video for the rear passenger side? My door lock actuator motor. Thank you and nice job with the videos.
Great video , count how many times he said OK 😂
Does this work on w204 c63 with keyless go?
anybody knows if its a 15 o 50 torx?? didnt undestand him.
Well done lads. The retakes were brilliant and the banter was great. Was that a dog or a cat towards the end ?
Your Videos are good ok, but please stop saying ok every 5 sec please
Merci
Excellent tutorial, just stop saying ok so much, OK!? 😁
Nice Video. How to replace the drilled rivets?
Does the GLK 350 2010 also have the riveted panel?
SKANDaR0875 put new rivets in
Screw the rivets (no pun intended)! : )
Replace them using screws/bolts & nuts & also use loctite.
Just replace with sheet metal screws.
Good video Ok.
ok
Hello my 2010 C350 w204 the driver side power door lock don't work. Which wires for power ( color code) to disconnect it. And if I use the key to open the door instead. SInce I have keyless Entry and can open/lock by the key fob. Will the Mercedes computer will keep drain my battery since the door lock is not work. And don't go to sleep mode and try to send power to close it.
Ок
OK?
Did you count how many times he said “ok”? 😂
Ok but what size rivets are needed?
Were is the OK count.? Ok
When removing the 'fastening clip' (1st one removed, top left corner), the case has 2 metal clips, the lower 'single tongue' clip and the upper 'split-tongue' clip. Use a small flat head screw driver to ease the lower clip up and the upper clip down to clear the case off and easily ease (gentle prying) the case out without braking. DO NOT pry it off so it will not break as done by the presenter. Thank you.
MY MERCEDES C 300 REFUSES TO CLOSE THE DOOR NOR LOCK THE DOOR,WHAT COULD BE THE PROBLEM?
My car driver side door don’t lock with remot or on lock sup with tht
Door handle won't pull back outside from rear right passenger side. How to fix?
Ok
Okay guys
how many times did he say "ok"?
I counted 3 times
Ok ok ok ok ok ok
Аз имам абсолютно същия проблем, с абсолютно същата кола... направо не ми се започва. Мерси за видеото
ok ok ok, looks and sounds like:
Totally confident appearance with absolute cluelessness.
I like it, I will try it out
Wow how complicated lol man I hate my life lol
Good god. This is a lot for a damn actuator 😑
Ok, guys?
По мартениците познах от къде сте :D
hi guys OK I am going OK to show you OK to do it OK so OK it's time OK to do it OK
Its ridiculous they used metal rivets for the inner door panel
you said OK word so many times ...... 🤫
Too much work. I rather buy the entire door lol
Cheap ass rivets!... talk about cost cutting! All Japanese / Korean cars use plastic insert and self tap screw 👍
Mercedes used to use bolts and nuts back in the 80s at least but went to rivets at some point. What a pain in the ass. The center stem of those rivets should be punched out with a center punch or your drill bit can wander and end up enlarging the hole it is in which makes new rivets not hold well. I know this from experience.
What were Mercedes thinking with this absolute PITA? Awful job, guess I'll be paying Mercedes £500 to sort out what appears to be an extremely common problem! Absolutely shameful from a supposed "premium" brand. Swore by BMW prior to this car and needless to say, I'll be going back.
I have to pull my handle from the inside to pop the lock. it snapped I replaced the chrome handle but want it to work as is should is this what I need to change .
if i got a dollar for everytime you said OK, are you OK ? is this the same for the 2010 rear passenger side door
Ok
Ok