I see what you mean. However even if we are taking the wheels off we always clean them before bringing the car inside the unit. I appreciate we’re some what repeating the process but there’s no harm in doing so 👍🏼 Hope that helps
Great video as always. I like everything including easy listening music. and sound detail collection But what I would like to recommend I want you to put in the letters. An explanation is included. During the time you pick up the product to use In case some people don't know the products you use. then want to go buy Then come to work collecting details according to the steps you took, including dilute as well.
@@franksAVFC No problem Jack 👍🏼 So there isn't any benefit when it comes to the polishing stages. However the air dryer works far better when the hydrophobic coating has been applied to the car. Plus we find the results quite satisfying!
Hello Bro!! 1st time come across your video..Really Thump Up!! Fantastic!! Plus you are washing my best car and my best colour!! What a Coincidence!! Love from Mauritius !!
Probably took more time than preferred due to doing the wheels 2 separate times. I'm assuming u applied the wheel sealant to the calipers also 🤔. And try to use gloves throughout the detail, not for only hand smudges but most of those chemicals aren't good for the skin. All in all very good video. I'm just being nit picky. Keep up the good work.
Thank you very much for the feedback! Glad to hear you enjoyed the video. So yes we did apply the sealant to those other areas as well. There are some parts of the detail we tend not to film just because the video ends up being to long aha. Appreciate those other points as well though 👍🏼
Great video really enjoyed it Ditch the kranzle and get a hot pressure washer Bilt Hamber touchless foam you'll thank me later Change the tip to green gives better bite into the dirt without compromising on safety of the clients paintwork.
Ahh thank you very much! Yeh it's mainly just because we can only do one wheel at a time at the moment (due to not having a proper lift). Hopefully this will change in the future 👍🏼
Good question! To be honest it’s just a habit we have before we bring cars into the unit. We also tend not to coat wheels to often. There’s no harm giving them an extra clean though 👍🏼
Thank you very much for the feedback! We filmed this video I little while ago now so I can’t be 100% certain. However I’m fairly sure we used Gyeon Primer and a range of Zvizzer pads. Hope that helps 👍🏼
This is a movie ? Man, i opened this vídeo because was on my feed, i start watching and i look for every detail on the vídeo, the details on cinematic, the soundtrack, when the video finish i realize past 32 minutes, wtf .... I dont know if i can give a oscar for 3 differents things, a oscar for cinematic, a oscar for soundtrack, a oscar for car detailing .... maaaaannnnn
Ahah this has to be the best comment yet! Can't thank you enough for this feedback, it's hugely valuable. Plus it's always great to hear that our work is appreciated. Hopefully we can deliver on future videos as well. Again thank you very much! 🙏🏼
The only thing I am worried about is that he cleans the sideskirts for then to go to the doorpanels. Can create scratches as the skirts build up way more dirt.
I can understand your concern and I agree our method should be altered slightly to reduce this risk. However, the processes we have in place beforehand (pre-wash, snowfoam) help reduce the likelihood of causing scratches during this process.
Our biggest & most time consuming detail to date! Let us know in the comments what you think 🤘🏼(p.s who thinks we need to buy a lift for the unit so we dont have to sit on the floor)?
@@davidcucchoc5557 I think the initial cost outlay is the main con at the moment. However I’d like to think the long term benefits will definitely be worth it!
@@refinedfilms. there are lifts that you can lease for not too much money, then once you have some capital behind you, you could buy one, perhaps even the one you are leasing. I think any pro with a unit should have one for long term benefits
@@Ally.MacMillan Thanks Ally! Yeh it’s definitely something we need to look at over the next couple of months especially as we start doing PPF as well 👍🏼
@@refinedfilms. Could always look into a quickjack portable lift in the meantime. Just roll them under the car, and lift the whole thing at once. That's what we had at our shop. We'd just crack the lug nuts then lift the car.
Hi Brock, cheers for getting in touch! So this car was roughly in with us for 4-5 days work in total. The filming for the video took place over 3 of those days 👍🏼
Nano shampoo before polishing - nice 🤦♂️ Using primer when there are a lot of scratches on the paint… so bad, you just masked them, this is not a paint correction before applying coatings. Does Gyeon teach like this? It is so disappointing 😢
Thank you for your feedback 👍🏼 I’m not sure what you mean by nano-shampoo as this isn’t a product we use? With regards to this being a ‘paint correction’ it isn’t. The client asked for the paint to be enhanced before applying the coating and therefore wasn’t looking for ‘perfection’. Hope that helps 😊
@@refinedfilms. they’re referring to the hydrophobic coating applied to help the drying. People think before polishing you must have a completely clear and naked surface but this isn’t the case as you know 👍
Thank you for your response! We would love to work on some older 'unloved' cars. However those owners are usually not willing to pay for our services. At the end of the day we can only film the cars that clients are willing to pay for. Hope that helps 👍🏼
@@veritasman Thank you for your response. I appreciate what you mean. However because of where our unit is located (near a busy road on an industrial site). There's always unwanted noise in the background which unfortunately we can't do anything about. I tend to use the music to mask out these unwanted sounds. I hope that makes sense 👍🏼
Massive props to the videographer and editor for producing this cinematic masterpiece
Ahhh brilliant, thank you very much Jack! 👍🏼
Video quality just keeps getting better and better :) keep up the good work!
Thank you very much Rae! Really appreciate the support 🙌🏼
So good, so right. Out of time before another busy week. Keep going and growing. Thanks for this moment.
Thanks for the support Jeff! It’s greatly appreciated.
The video quality is really impressive! Best detailing content on youtube imo. Keep it up🤩
Ahhh really?! Thank you so much! Appreciate the support 🙏🏼
great video. you and vermijl detail has the most superb videography. keep it up
Thank you very much! We appreciate the support
100% agree. i would also add chromatic garage ✌🏻
@@A000-q5f Ahhh thanks! Love the content those guys do 👍🏼
痾 😅 Since the rim needs to be disassembled, there is no need to wash it before, so dismantle it and do it again?
I see what you mean. However even if we are taking the wheels off we always clean them before bringing the car inside the unit. I appreciate we’re some what repeating the process but there’s no harm in doing so 👍🏼 Hope that helps
First one of your vlogs I have seen, many thanks for sharing, a lot of folks don't realise the effort that goes into these
Thank you very much Ally! Glad to hear you enjoyed the video. Always appreciate the feedback 👍🏼
Great video as always. I like everything including easy listening music. and sound detail collection But what I would like to recommend I want you to put in the letters. An explanation is included. During the time you pick up the product to use In case some people don't know the products you use. then want to go buy Then come to work collecting details according to the steps you took, including dilute as well.
Thank you for your feedback!
Bro your channel is underrated, the whole process looked logical to me, I don't get why people try to correct your method
Ahh thank you so much bud! Glad to hear you enjoy seeing the process and we always appreciate the support.
Why add protection if your just going to polish it ?
Thanks for getting in touch. So, we just add the hydrophobic coating to help make the drying process easier 👍🏼
Hi, Why did you put a coating on before paint correction?
Hi Jack, cheers for getting in touch! So we just use that hydrophobic coating to make the drying process easier. Hope that helps 👍🏼
@@refinedfilms. thanks for reply, what’s the benefit of this before the polishing? I’m just curious. Cheers
@@franksAVFC No problem Jack 👍🏼 So there isn't any benefit when it comes to the polishing stages. However the air dryer works far better when the hydrophobic coating has been applied to the car. Plus we find the results quite satisfying!
Hello Bro!! 1st time come across your video..Really Thump Up!! Fantastic!! Plus you are washing my best car and my best colour!! What a Coincidence!! Love from Mauritius !!
Hello! Thank you very much for your feedback it always greatly appreciated. Glad to hear you're enjoying the content 🙌🏼
Awesome job , looks great . Thanks for the video.
Thank you very much!
Probably took more time than preferred due to doing the wheels 2 separate times. I'm assuming u applied the wheel sealant to the calipers also 🤔.
And try to use gloves throughout the detail, not for only hand smudges but most of those chemicals aren't good for the skin.
All in all very good video. I'm just being nit picky. Keep up the good work.
Thank you very much for the feedback! Glad to hear you enjoyed the video.
So yes we did apply the sealant to those other areas as well. There are some parts of the detail we tend not to film just because the video ends up being to long aha. Appreciate those other points as well though 👍🏼
@In The Detail absolutely brotha. Keep em coming. 💪
@@abevela1618 Will do! 👍🏼
Great video really enjoyed it
Ditch the kranzle and get a hot pressure washer
Bilt Hamber touchless foam you'll thank me later
Change the tip to green gives better bite into the dirt without compromising on safety of the clients paintwork.
Hi Graham, glad to hear you enjoyed the video!
That sounds great. Thank you very much for those tips as well 👍🏼
Amazing job my man but I'm surprised you didn't take the wheels off and do them first.
Ahh thank you very much!
Yeh it's mainly just because we can only do one wheel at a time at the moment (due to not having a proper lift). Hopefully this will change in the future 👍🏼
@@refinedfilms. nice my man you've got some skillls
@@BrooklynsFinestOG Appreciate it bud! Thank you for the support
Why clean the wheels at the start if you were gonna take them off and clean them again?
Good question! To be honest it’s just a habit we have before we bring cars into the unit. We also tend not to coat wheels to often. There’s no harm giving them an extra clean though 👍🏼
Really enjoyed the video. Which polish and pad combo was it?
Thank you very much for the feedback! We filmed this video I little while ago now so I can’t be 100% certain. However I’m fairly sure we used Gyeon Primer and a range of Zvizzer pads. Hope that helps 👍🏼
Hi Buddy Can I ask please what the Autosmart coating is called? Many thanks
Sure! Cheers for getting in touch.
Its called 'Autosmart Aqua Seal Pro'. Here is a link to the product on their website.
autosmart.co.uk/aquaseal-pro/
@@refinedfilms. Thanks a lot and great work by the way😇👍🏼
@@simond3604 Thank you very much! If you have any other questions just let us know 👍🏼
This is a movie ?
Man, i opened this vídeo because was on my feed, i start watching and i look for every detail on the vídeo, the details on cinematic, the soundtrack, when the video finish i realize past 32 minutes, wtf ....
I dont know if i can give a oscar for 3 differents things, a oscar for cinematic, a oscar for soundtrack, a oscar for car detailing .... maaaaannnnn
Ahah this has to be the best comment yet!
Can't thank you enough for this feedback, it's hugely valuable. Plus it's always great to hear that our work is appreciated. Hopefully we can deliver on future videos as well.
Again thank you very much! 🙏🏼
The only thing I am worried about is that he cleans the sideskirts for then to go to the doorpanels. Can create scratches as the skirts build up way more dirt.
I can understand your concern and I agree our method should be altered slightly to reduce this risk. However, the processes we have in place beforehand (pre-wash, snowfoam) help reduce the likelihood of causing scratches during this process.
Great video amazing detail work quality.👍
Thank you Martin, glad you enjoyed it 👍🏼
Our biggest & most time consuming detail to date! Let us know in the comments what you think 🤘🏼(p.s who thinks we need to buy a lift for the unit so we dont have to sit on the floor)?
is all up to your comfort and what you think is going to make you even more of a proficient detailer and what are the cons and pros of owning one
@@davidcucchoc5557 I think the initial cost outlay is the main con at the moment. However I’d like to think the long term benefits will definitely be worth it!
@@refinedfilms. there are lifts that you can lease for not too much money, then once you have some capital behind you, you could buy one, perhaps even the one you are leasing. I think any pro with a unit should have one for long term benefits
@@Ally.MacMillan Thanks Ally! Yeh it’s definitely something we need to look at over the next couple of months especially as we start doing PPF as well 👍🏼
@@refinedfilms. Could always look into a quickjack portable lift in the meantime. Just roll them under the car, and lift the whole thing at once. That's what we had at our shop. We'd just crack the lug nuts then lift the car.
Half an hour of watching a great car’s relaxing detailing video!!Congrats!!👏🏻👏🏻👏🏻
Glad you enjoyed the video! Thank you very much for the feedback 🙌🏼
How long did all of this take you?
Hi Brock, cheers for getting in touch! So this car was roughly in with us for 4-5 days work in total. The filming for the video took place over 3 of those days 👍🏼
Great video and nice detail!
Thank you! Appreciate it 🤘🏼
What polish did you use?
Cheers for getting in touch Bill, we most likely would have used ‘Koch Chemie Heavy Cut H9.02’ for this. Hope this helps 👍🏼
was you using hot water for wheel bucket ?
Amazing vid
@@benjaminbutterworth-pw4tx Thank you very much! Yes warm water for the wheel bucket
Guys.. I admire you all! how much professionalism! I was impressed. a beautiful inspiration!😉♥️
Thank you very much! We appreciate the support 🙏🏼
Great quality video and audio!
Ahhh thank you very much!
How much do u charge?
What are you looking for exactly? A general wash, full detail e.t.c?
@@refinedfilms. On this car?!
@@andualx I can’t really disclose figures but this car was in with us for roughly 4-5 days work in total 👍🏼
Good Work 👍 Music is nice too, but sometimes a little bit to loud :D
Thank you 🙌🏼Yes, sorry about that! Sometimes have to use the music to drown out any unwanted sounds from the units next door aha
Awesome video !
But you should wear a mask while applying the ceramic coating
Thank you very much! Yep totally agree, our mistake on that one 👍🏼
The auto smart hybrid coat was extremely pointless, specially if you were gonna compound and polish afterwards anyways, other than that good video
Thank you for the feedback! We only use the hybrid coating to help make the drying process easier 👍🏼
@@refinedfilms. so why not use bead maker or something along those lines? you’d avoid wasting so much extra water
@@rajdhir919 Hmmm it’s a good suggestion! Definitely something we will look into. Thank you 👍🏼
Oh!!👍👍👍👍👍👍It's so very nice
Thank you very much! 🙏🏼
What's the cars color? :o
We think it is Rosso Corsa, but we’re not 100% certain 👍🏼
Nice touch on a sweet beast!👌
Not sure the blue calibers go which orange tho🤔… I’d deffo get that sorted!
Nice work tho bud👍
Thanks Darren, appreciate the feedback! 👍🏼 Yes I agree. Always nice to see these cars in something other thank black, grey and silver!
Normally I don't like orange cars but BMW somehow made it work. This color is very impressive.
Yes I agree! Always nice to have something abit different instead of the usual colours 👍🏼
Great video
Thank you very much!
@@refinedfilms. Welcome dude keep up the good work
@@APASSIONFORDETAILING Cheers bud! Appreciate the support
Wow ❤
Thank you! 🙌🏼
what a great video nice camerawork
Thank you very much! Much appreciated 👍🏼
Can you guys come over to the colonies and do my 740😁
Maybe one day!
video is so soothing to watch
Thank you very much David!
Wow🤤🤤🤤🤤
Thank you very much! 🙌🏼
The way you wash it looks to me that yours scratching the paint.
Ohhh okay, why do you think that if you don’t mind me asking?
@@refinedfilms. sure, is the way you wash, instead of going back and forward with the washing pad, just go in straight lines out.
@@MrBMW83 Ahhh no problem, I see what you mean. Thank you for the suggestion 👍🏼
Гуд джяп ма бой😂
Thank you! 🙌🏼
Suuuper
Thank you! 🙏🏼
Thank you! 🙏🏼
Awesome video. Subscribed. I think a lift will make things easier for sure. Keep investing in yourself.
Thank you very much Mario! We appreciate the support.
Yes! I think a lift will be on our list to buy this year 👍🏼
Such a nice video! I just did a BMW M3, also on my channel! But I have a lot to learn 💪
Thank you very much, appreciate the feedback 🙌🏼 Ahh very nice, I'll have a look!
Nano shampoo before polishing - nice 🤦♂️ Using primer when there are a lot of scratches on the paint… so bad, you just masked them, this is not a paint correction before applying coatings. Does Gyeon teach like this? It is so disappointing 😢
Thank you for your feedback 👍🏼
I’m not sure what you mean by nano-shampoo as this isn’t a product we use?
With regards to this being a ‘paint correction’ it isn’t. The client asked for the paint to be enhanced before applying the coating and therefore wasn’t looking for ‘perfection’. Hope that helps 😊
@@refinedfilms. they’re referring to the hydrophobic coating applied to help the drying. People think before polishing you must have a completely clear and naked surface but this isn’t the case as you know 👍
@@PolishedMobileDetailing503 Yes, I think I understand what they were talking about now. Cheers for the clarification 👍🏼
Чушь ,она и так в отличном состоянии была и до вас !Вы найдите убитые машины и там покажите свой уровень!А не на новой бмв!
Thank you for your response! We would love to work on some older 'unloved' cars. However those owners are usually not willing to pay for our services. At the end of the day we can only film the cars that clients are willing to pay for. Hope that helps 👍🏼
Too much work. Wasting time. One tower for all
Thank you for the feedback James. Could you please explain why?
please, loose the annoying background music ...
Please could you explain?
@@refinedfilms. it would be much better to just listen to the natural sounds of this beautiful process
thanks a lot
@@veritasman Thank you for your response. I appreciate what you mean. However because of where our unit is located (near a busy road on an industrial site). There's always unwanted noise in the background which unfortunately we can't do anything about. I tend to use the music to mask out these unwanted sounds. I hope that makes sense 👍🏼