Thank you very much for taking the time. I really appreciate it. There will certainly be more updates to come. Honestly, my next step is to switch the wire that came with the antenna out for the new one and use it in the EFHW config, and see if it isn't an issue with the new wire. Seems like a good first step to me. 73!
On your inverted-V, you could try terminating your legs several feet off the ground. Just attach some paracord to each end and tie off to some low hanging branches or bushes, or tie off to some 3-4 ft wooden stakes
That's definitely going to be something I try. For this one, I just wanted to see if it would work at all in a hasty setup using the ground stakes I normally have with me. I'm going to take some more paracord with me the next time and find a different spot. This one was great for just using an EFHW, not so much for a dipole the way the trees were. Thank you for the suggestion!
Absolutely. That's not a bad idea at all. I've got a multitool and pliers with me whenever I'm out operating. Just happened to briefly forget I had the multitool at the time. 73!
When you use two 65 ft wires as a dipole, it will be an 80m dipole. It will only work on 80 meters, it won’t be a multi band antenna like the LEFS EFHW.
That's a good point that I didn't even think about. The next time I have it out with me, I'm going to give 80m a look. I rarely ever operate on 80, so I didn't even think to check that band with my analyzer. That makes perfect sense. Thank you.
Thanks, brother! I'm getting somewhat closer. Tonight, I tested the new wire on the antenna in the EFHW config. It worked just like the original wire. So that part is eliminated. Seemed like the next best and most logical step. To the drawing board!!
I may not be among the three that watch the whole video, but I do watch a good amount. Hmmm, may be so way to put it in fast forward instead of jumping through sections. 73
My joke about "all three of you" was just that. I know my humor isn't for everyone. You can certainly fast forward through RUclips videos though. Thank you as always for putting up with me on camera. 😉
great video.... keep us posted on the issue with your antenna
Thank you very much for taking the time. I really appreciate it. There will certainly be more updates to come. Honestly, my next step is to switch the wire that came with the antenna out for the new one and use it in the EFHW config, and see if it isn't an issue with the new wire. Seems like a good first step to me. 73!
Great video... I enjoy your style of videos
Thank you! I've been trying to make them better, but sometimes heat doesn't equal creativity lol. 73!
On your inverted-V, you could try terminating your legs several feet off the ground. Just attach some paracord to each end and tie off to some low hanging branches or bushes, or tie off to some 3-4 ft wooden stakes
That's definitely going to be something I try. For this one, I just wanted to see if it would work at all in a hasty setup using the ground stakes I normally have with me. I'm going to take some more paracord with me the next time and find a different spot. This one was great for just using an EFHW, not so much for a dipole the way the trees were.
Thank you for the suggestion!
A small set of tools goes with me any time I go mobile or portable. It's as important as the radio and battery.
Absolutely. That's not a bad idea at all. I've got a multitool and pliers with me whenever I'm out operating. Just happened to briefly forget I had the multitool at the time. 73!
Shooting awe don't get scared.
Awe, don't worry little pup. I was way out in the country. That's a common thing around here and the last I would ever be scared of.
When you use two 65 ft wires as a dipole, it will be an 80m dipole. It will only work on 80 meters, it won’t be a multi band antenna like the LEFS EFHW.
That's a good point that I didn't even think about. The next time I have it out with me, I'm going to give 80m a look. I rarely ever operate on 80, so I didn't even think to check that band with my analyzer. That makes perfect sense. Thank you.
Hey John! Another great video. Did you ever work out the dipole configuration.
Thanks, brother! I'm getting somewhat closer. Tonight, I tested the new wire on the antenna in the EFHW config. It worked just like the original wire. So that part is eliminated. Seemed like the next best and most logical step. To the drawing board!!
I may not be among the three that watch the whole video, but I do watch a good amount. Hmmm, may be so way to put it in fast forward instead of jumping through sections. 73
My joke about "all three of you" was just that. I know my humor isn't for everyone. You can certainly fast forward through RUclips videos though. Thank you as always for putting up with me on camera. 😉
@@KC0JH_HAMateur_Radio oh, I got the humor. But I was serious, i watch and enjoy your program.
On the flatside?
My apologies. My coffee hasn't kicked in yet this morning. Could you be more specific?