Watched the last McLaren video, saw the comment about the broken wire, liked said comment, hoped that Mat would see it, watched today’s video and saw him repair it! The satisfaction involved with that process is unreal! Kudos to the subscriber who caught it 🧐 and kudos to Mat listening😎! Love it! Can’t wait for the Mansory video!!!
Yeah, but he said in the replies on that original comment that it wasn't it and he'd checked it. I guess he didn't check close enough! Great to see it sorted anyway.
Mat has been letting out his sinister side lately, like scheming to rob people with unreturnable parts and snitching that he stole the tool from McClaren 😆. I like it.
And especially check out the first-in-the-World Ivermectin, Mebendazole and Fenbendazole Protocol in Cancer which has been peer-reviewed and published on Sep.19, 2024.
You my friend are a genius at repairing damaged cars. You are my RUclips celebrity by far. Great work on all your builds. I’ve watched all your 2+ hour videos of you repairing damaged cars.
Mat you should come to the Isle of Man, great driving roads and no speed limit in quite a few places😉. Brilliant videos as normal, keep it up. Living every boys dream
I love my budgies took a few days off work I am just watching your videos listening to music and the little guys are just flying around chirping their little hearts out. I don’t need much a fun car my birds and enough money to take time off when I feel like it.
Mat you should use solder heat shrink sleeves instead of those red connectors. These things solder and make a waterproof connection all with a lighter or heat gun. Will last much longer especially in a wheel arch.
Totally agree, joint it once with the solder heat shrinks, rock solid . I thought Matt recommended using these ages ago on the front corner of another car repair. He’ll use them next time. 😁
Hi Mat Unfortunately the crimp connector you used is not a heat shrink version! Also soldering plus heat shrink is always 100% better than standard crimp as it’s a molten metal connection rather than two metals pushed together under force still allowing corrosion to take place. Sorry to be a nerd as I love your content. But it had to be said. Ryan
Hmm 100% you say. I would argue crimping has advantages over soldering when vibration is present. One of the reasons NASA chooses to crimp over solder.
Nah disagree. I've soldered and heat shrunk repairs in the engine bay before but they degrade over time with the heat and movement and end up breaking. Never had a problem with crimps and in fact some of the euro manufacturers actually recommend using crimp connectors for wire repairs.
If the ABS Sensor WIRE is stiff, it means either it has over heated or corroded internally. I am sure you have put it on the list of things to address during its next Service. As you know if one wire failed, and the wire next to it is close to failure with so few miles and time on the road, it hints at a Re-Call, and to check the other ABS Sensor harnesses for a similar condition. If one set of wires aged out, the others may as well.
Always check basics when it comes diagnostics it’s what i learnt as apprentice while working at bmw. People often throw parts at a vehicle and think it solves the problem.and honestly speaking always when I watch Matt videos always get reminded to check the basics. Great content bro 🔥🔥🔥
As a master tech. Most faults I've ever found have been wiring/connection faults (haven't been a tech for 15yrs) the amount of customers that used to bitch about being ripped off by a main dealer only to turn round and say they'd paid thousands to Fred in shed for ecus etc.... less than an hour later wiring fault found
A useful trick with re-assembly on plastic parts with metal screws, if you undo the screw until it goes click and drops into the old thread, then you can do it up using the old thread, this results in a stronger repair as you haven't created a second, third or fourth thread. Failing to do this results in a screw that won't tighten as there is no plastic left to screw into.
My uncle is a proper car fanatic, he's been hospital bound for the last 4 years due to pneumonia, and your videos always got him by... Sadly he passed away last week
Early gang, and I absolutely love your videos matt! Whenever a new one comes out it's a drop everything and watch for me. I'm also an aviation mechanic but I haven't had a chance to really explore cars so watching you work on some of the best icons is the most inspiring and amazing experience. Keep up the amazing work and hopefully there will be a chance to mee yoy one day!
You actually did the right thing not soldering it as the resistance in the solder is different to the wire and can still throw out the sensor reading. 😊
I remember that fella's comment on the video... He must watch the videos frame-by-frame to have caught that! Sensational team work, well done that man. I think those wheels are finally growing on me... And I'm not sure if that's a good thing or not! Car looks phenomenal anyway.
Mat Armstrong is the best mechanic to me personally because I want to be a mechanical engineer for cars only and hopefully one day I will create my own CAR
Mat! Im cryin because your didnt use a solderstick! theyre heat wrap with solder in the middle for just such repairs. those red connectors are made of a very cheap metal and plastic outer coating. happy to see the mclaren another step closer to perfect!
This video feels like hanging out with friends in your private shop tuning your private daily driver. Only the fact thats a freakin supercar is mind-blowing.
Love the content, ur an inspiration, the vibes, the banter, makes my day, have u thought about rebuilding cheap daily’s like golfs, fiestas , civics, but from 2002-2018 and also finding a few max power cars and rebuilding them with todays tech as in stereos, paint jobs, etc
Love your videos buddy, but don’t blur your speed cluster we all know what you’re doing. Find a private road. It only takes for a kid to drop out in the road, that’s how my best friends boy died
13:04 (Mat in his thougts) Not now! I'm trying to remember the promotional code i'm going to have to say. Nice you fix the Mclaren keep the good videos!
Am I the only one who misses the old style Matt Armstrong channel just him and he’s girlfriend without the hangers on and sycophant’s? Good luck to him but it’s getting silly now imho
I wish I had the friends to be crazy with in a shop. I love watching the commarradary between you guys. I love working on cars but get so bored with nobody to joke around with
Mat. Get Sopoby’s. They actually have a heat activated seal at each end and a little ball of solder in the middle that will melt into the wires when heated. They are WAY higher quality connection. Particularly for exposed wires like that. Don’t want road water shorting those out
Great funny video- that ‘s the fun in fixing any car with the boys - thats what we did in the 1980 ‘s to have a car ready for the weekend to take out the top girl on the estate with the hope of light fingering.
When you are fixing wires with butt connectors get the actual heat shrinking ones (especially when it’s something on the outside of the vehicle) or u have a possibility of water getting in the connection and frying something or popping fuses
Absolute legend spotting that, I looked back and didnt see it when I read the comment. Also, I have no right to cry about this with how my own car electrical is looking atm 😂😂
Another great video mat. Smashing it like you always do. Keep up the great work which I’m sure you will do. Can’t wait till the next one! Hands down the best car youtuber or RUclipsr overall.
Thanks Mat. I developed the exact same fault on my McLaren 720s last week. Speedo said 6mph, esc fault, cruise control fault. My dad an I fixed it today, saved £300,000 at McLaren 😂😂😂😂
Matt, Love your Video's.I'm a real Car Nut. Have a Porsche 997 3.8 Manual. Mercedes SL63 BiTurbo Convertible, and a Supercharged 2017 Manual Mustang,highly Modified. BUT I have a Suggestion. Why hasn't anybody made front Splitters with little metal or CF ,or Plastic Rollers built in,so instead of scraping the Mac,or anything else,the Rollers just wear instead? That way,No Scrapes on your CF Splitters.(Which I noticed on your Mac!).
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
i came here to cry about matt his electrical work he said i could cry all i want
😂
😂😂😂😂
Comments like this is a bunch of DE BRIS
Cry all you like
@@bubblespoof999 🤣
Just a gang of mates living their best lives doing what they love most.. What dreams are made of.. 👌🏼👌🏼
Watched the last McLaren video, saw the comment about the broken wire, liked said comment, hoped that Mat would see it, watched today’s video and saw him repair it! The satisfaction involved with that process is unreal! Kudos to the subscriber who caught it 🧐 and kudos to Mat listening😎! Love it! Can’t wait for the Mansory video!!!
Yeah, but he said in the replies on that original comment that it wasn't it and he'd checked it. I guess he didn't check close enough!
Great to see it sorted anyway.
Love the Chris and Ethan appearance! Would be great to see you drop into Chris’s unit and just relax in the background while he’s stressing! 😅
Love seeing Chris and Ethan pop up randomly in these videos, Chris is such a good friend helping out everytime, we all need a Chris in our life.
bro is NOT him
@@yaztopy I agree, Chris's behavior in this video..
@@devinmorris7241 im not talking about chris.
Mat has been letting out his sinister side lately, like scheming to rob people with unreturnable parts and snitching that he stole the tool from McClaren 😆. I like it.
I'm not a fan. I hope he doesn't screw himself over by saying the wrong thing one time. Too many people watch his videos. He needs to be more careful.
@@michaelrockwell9691 People who can't take sarcasm or jokes shouldn't be on the internet.
@@michaelrockwell9691I bet you complain to HR when a colleague tells a joke at work
@@mitz2772 This happened to a mate of mine. What a sad state of affairs
@@michaelrockwell9691I bet your great fun at a party 🤷♂️🤦🏼♂️
Your videos are helping me get threw my chemo a lot easier. Thank you
And especially check out the first-in-the-World Ivermectin, Mebendazole and Fenbendazole Protocol in Cancer which has been peer-reviewed and published on Sep.19, 2024.
That windtunnel part is hilarious, thanx Mat!
Would have been even funnier if they were facing the other way 🤣
@@guikoelln would have been funnier than that if the splitter fell off on the first blow lol.
Matt, the only way to make sure the front splitter stays on is to drive it to Malory Performance Dyno and see if it meets the same fate as the BMW
“CRY ALL U LIKE” 😂😂😂 I LOVE THAT SAYING
People are going to cry because he didn’t torque his wheel nuts. Guess what…?
@@chrismason6857 CRY ALL U LIKE 😂
Nothing is better than a Mat Armstrong Video in the Evening! Greetings from Germany!
If you are going to use crimp connectors buy a decent set of ratchet crimper they make a better joint
Definetly driving at the speed limit when your dash was blurred :)
Man was going up to 5th gear on back roads 😂
😂😂😂😂
He should also blur the view out of the Windshield, since the distance between the telephone polls could be used to figure out how fast he was going.
cry about it
The car was just "broke"
You my friend are a genius at repairing damaged cars. You are my RUclips celebrity by far. Great work on all your builds. I’ve watched all your 2+ hour videos of you repairing damaged cars.
Mat you should come to the Isle of Man, great driving roads and no speed limit in quite a few places😉. Brilliant videos as normal, keep it up. Living every boys dream
Watching you 3 abuse the McLaren was the most amusing thing ive watched in a while. Id love to see you all together more
Shoutout Dips, he really the MVP
I love my budgies took a few days off work I am just watching your videos listening to music and the little guys are just flying around chirping their little hearts out. I don’t need much a fun car my birds and enough money to take time off when I feel like it.
i love budgies
13:08 had me rolling 😂 bro coulda said my bad
Mat you should use solder heat shrink sleeves instead of those red connectors. These things solder and make a waterproof connection all with a lighter or heat gun. Will last much longer especially in a wheel arch.
Totally agree, joint it once with the solder heat shrinks, rock solid . I thought Matt recommended using these ages ago on the front corner of another car repair. He’ll use them next time. 😁
Hi Mat
Unfortunately the crimp connector you used is not a heat shrink version!
Also soldering plus heat shrink is always 100% better than standard crimp as it’s a molten metal connection rather than two metals pushed together under force still allowing corrosion to take place.
Sorry to be a nerd as I love your content.
But it had to be said.
Ryan
Hmm 100% you say.
I would argue crimping has advantages over soldering when vibration is present. One of the reasons NASA chooses to crimp over solder.
However proper repair procedure would be to replace the wire, according to ASE you shouldn’t repair abs wires.
Nah disagree. I've soldered and heat shrunk repairs in the engine bay before but they degrade over time with the heat and movement and end up breaking. Never had a problem with crimps and in fact some of the euro manufacturers actually recommend using crimp connectors for wire repairs.
@@OneIdeaTooMany I was talking about the Automotive Society of Engineers.
Cry all you like
10/10 content as usual I love what you do! Just please be safe and stay humble out there brother.
Mat and the boys doing late night repairs while stoned is great entertainment. 😂
Absolutely love the mk2 channel, and I’m loving the fact that you’s are doing repairs on these super cars that get used on every other car
You are spot on about crimps rather than soldering. There is a good reason car maufacturers and planes crimp everything!
Just need to be careful with the tesa tape as it’s not waterproof, if anything it retains water
I cried all I wanted, thankyou.
Yes been waiting for a video
Me too
If the ABS Sensor WIRE is stiff, it means either it has over heated or corroded internally. I am sure you have put it on the list of things to address during its next Service. As you know if one wire failed, and the wire next to it is close to failure with so few miles and time on the road, it hints at a Re-Call, and to check the other ABS Sensor harnesses for a similar condition. If one set of wires aged out, the others may as well.
to be honest i love this real version of mat on this channel more. bro is unfiltered af 🤣
Always check basics when it comes diagnostics it’s what i learnt as apprentice while working at bmw. People often throw parts at a vehicle and think it solves the problem.and honestly speaking always when I watch Matt videos always get reminded to check the basics. Great content bro 🔥🔥🔥
As a master tech. Most faults I've ever found have been wiring/connection faults (haven't been a tech for 15yrs) the amount of customers that used to bitch about being ripped off by a main dealer only to turn round and say they'd paid thousands to Fred in shed for ecus etc.... less than an hour later wiring fault found
I was crying (with laughter) when Mat tried to heat shrink an non-heat shrink connector 😁
Chris’s “get it done man!”-energy was great haha keep it up gents!
A useful trick with re-assembly on plastic parts with metal screws, if you undo the screw until it goes click and drops into the old thread, then you can do it up using the old thread, this results in a stronger repair as you haven't created a second, third or fourth thread. Failing to do this results in a screw that won't tighten as there is no plastic left to screw into.
EARLY CREW WHERE YOU AT?
Here
Here
Hola
Here
me
I am so hooked on your content all the way from South Africa. Awesome stuff bro 😊
1:18 mat after he is saved by his viewers 😂
Bro these McLaren episodes have literally been the funniest you have ever been. And I enjoyed the hell outta it. Keep it up
That's the next shirt in your merch lineup.
😢 "Cry all you like" 😢
We were right! HELL YEA, glad to help :D
4:10 sounds like polish cars salesman
We need Mat to make "cry all you like" on a t-shirt now 😂
Guess what I'm gonna do if he didn't make a t-shirt with it? Cry all I like 😂
Wincing about the MA wiring fix, it’s the sort of thing that would keep me up at night. I’m a details man
Cry all you like lol
My uncle is a proper car fanatic, he's been hospital bound for the last 4 years due to pneumonia, and your videos always got him by... Sadly he passed away last week
Sorry to hear that… I hope and pray you stay strong always. Always have Faith🤍
God bless him!!🤍
may his soul rest in peace!
Sorry for your loss, but he has good taste.
May he Rest In Peace
Early gang, and I absolutely love your videos matt! Whenever a new one comes out it's a drop everything and watch for me. I'm also an aviation mechanic but I haven't had a chance to really explore cars so watching you work on some of the best icons is the most inspiring and amazing experience. Keep up the amazing work and hopefully there will be a chance to mee yoy one day!
Can't beat a 6pm upload
I will be crying, that I can not hangout with you guys once or twice a week in person. All of you keep up the good work.
mat armstrong tell me is this a comedy channel or an automobile channel i have never laughed so much i have never even been in any comedy show😂😂😂
You actually did the right thing not soldering it as the resistance in the solder is different to the wire and can still throw out the sensor reading. 😊
10:25 did Chris say what every I can f**king find 😂
I remember that fella's comment on the video... He must watch the videos frame-by-frame to have caught that! Sensational team work, well done that man.
I think those wheels are finally growing on me... And I'm not sure if that's a good thing or not! Car looks phenomenal anyway.
Haha i thought 0:02 was a round of applause
People seeing your videos made you fix the Mclaren! Thank you people who saw it so you could fix it!🙏
you guys are quick!
Thank you
Adonis why won’t you come home?!
Mom Is Worried Beyond Belief
Come Home!
Crimp connectors are ok, but use shrink wrap over the top. Looks so much better and seals from moisture 👍
17:56 Gobsmacked !
Love the back and forth between Chris and Mat
Mat Armstrong is the best mechanic to me personally because I want to be a mechanical engineer for cars only and hopefully one day I will create my own CAR
Good mechanics use a multimeter and find the issue instead of throwing the parts cannon at it.
Hahahaha, what a chancer that knows nothing and relies on ideas from other people? Yeah the best... At winging it.
Mat! Im cryin because your didnt use a solderstick! theyre heat wrap with solder in the middle for just such repairs. those red connectors are made of a very cheap metal and plastic outer coating. happy to see the mclaren another step closer to perfect!
Funny how on 4:55 his speedometer has been faded. You would almost say he is doing something illegal 😂
Ive been following you for almost a year now and i love all your videos❤❤❤ keep it up me friend
Never thought I would cry watching a Mat Armstrong video 😭
Love all your video's. your inspiring me to do better in life.
As I've watched for your Frist up load.
What a man you are.
5:03 whyd you blur out your speedometer? you were only going 30 mph
problem with the dashboard
He is blocking out the lights that might blind us who watch the video. Such a considerate guy 👍
Hes in mexico anyway so doesnt matter
Or maybe it might be personal mode that was the preious owner or smth@matarmstrongmk2
Love these mk2 channels, good to see you all having a laugh together
04:39 blurring the dash so the coppers don’t see how much you’re breaking the speed limit by! 😂
That won’t stop them looking into this at some point. Or getting pulled up on the road by a plain clothes copper 🤷🏻♂️
Some videos I’ll never get tired of watching ❤ W Matt
South Africa 🇿🇦 where are you at?
mpumalanga🤘🏾
@@craig11885😂
They’re in Leicester
Not crying, laughing too much. Love the attitude. Love how you blurr the speedo, def a petrol head. ✅️
Still no upload on main channel 🥲
Cry 😢
Sunday
@@matarmstrongmk2 I will wait patiently for this 😅
Cry all you like
This video feels like hanging out with friends in your private shop tuning your private daily driver. Only the fact thats a freakin supercar is mind-blowing.
They guy who commented on the last video, pointing out the snapped wire, deserves a free t shit!
Love the content, ur an inspiration, the vibes, the banter, makes my day, have u thought about rebuilding cheap daily’s like golfs, fiestas , civics, but from 2002-2018 and also finding a few max power cars and rebuilding them with todays tech as in stereos, paint jobs, etc
"mi 'ead was all catty whompers' 😂
That’s REEM baby! Love Mac 2. You guys are great!!
one of the first
"drill first" and "why are you iced-gemming" were my favourites from this.
Love your videos buddy, but don’t blur your speed cluster we all know what you’re doing. Find a private road. It only takes for a kid to drop out in the road, that’s how my best friends boy died
Its so they cant prove his speed
@@ajcards7128when he runs over a kid
13:04 (Mat in his thougts) Not now! I'm trying to remember the promotional code i'm going to have to say.
Nice you fix the Mclaren keep the good videos!
Am I the only one who misses the old style Matt Armstrong channel just him and he’s girlfriend without the hangers on and sycophant’s?
Good luck to him but it’s getting silly now imho
I wish I had the friends to be crazy with in a shop. I love watching the commarradary between you guys. I love working on cars but get so bored with nobody to joke around with
Lucky it never rains in the UK and that repair will never get wet! 👍
The variety and content and humour you cram into 18 minutes Mat...applaudible 👏👏 100%....I'm still crying...😂
Great video, thank you for showing me the beautiful scenery of the country you live in
Mat. Get Sopoby’s. They actually have a heat activated seal at each end and a little ball of solder in the middle that will melt into the wires when heated. They are WAY higher quality connection. Particularly for exposed wires like that. Don’t want road water shorting those out
Great funny video- that ‘s the fun in fixing any car with the boys - thats what we did in the 1980 ‘s to have a car ready for the weekend to take out the top girl on the estate with the hope of light fingering.
😂😂😂😂😂😂
When you are fixing wires with butt connectors get the actual heat shrinking ones (especially when it’s something on the outside of the vehicle) or u have a possibility of water getting in the connection and frying something or popping fuses
Absolute legend spotting that, I looked back and didnt see it when I read the comment.
Also, I have no right to cry about this with how my own car electrical is looking atm 😂😂
What a funny bunch of friends! Love it 🙏🏻👊🏻❤️
That's one of the best videos on this channel..So much fun and laughter 😂
It’s sick to see you’s having a giggle and a f**k about instead of just stressing , love it ❤
Heard you blasting round in this the other day, sounds so nice 😍
Another great video mat. Smashing it like you always do. Keep up the great work which I’m sure you will do. Can’t wait till the next one!
Hands down the best car youtuber or RUclipsr overall.
Love seeing the fun you guys have getting this stuff done
Thanks Mat. I developed the exact same fault on my McLaren 720s last week. Speedo said 6mph, esc fault, cruise control fault. My dad an I fixed it today, saved £300,000 at McLaren 😂😂😂😂
Great bantz, love the laid back Mk2 stuff , wind tunnel was hilarious 🙂
The ice gem line got me, just the boys ripping on each other is a great vibe
This episode was hilarious. Wind tunnel was the icing on the cake.
Wheel speed densors are the first thing to check when having abs alerts ( ive had to fix/teplace alpt of them)
Matt, Love your Video's.I'm a real Car Nut. Have a Porsche 997 3.8 Manual. Mercedes SL63 BiTurbo Convertible, and a Supercharged 2017 Manual Mustang,highly Modified. BUT I have a Suggestion. Why hasn't anybody made front Splitters with little metal or CF ,or Plastic Rollers built in,so instead of scraping the Mac,or anything else,the Rollers just wear instead? That way,No Scrapes on your CF Splitters.(Which I noticed on your Mac!).
What a bunch of quality lads living the YT dream fixing cars and having a laugh 😂
I’m not gonna lie. I silently cry when you do anything electrical but as your content is great then it’s all good for me 😂