Do have a video on “how to move a g body without the key”? I’m trying to put my car on a trailer without the ignition keys. I bought it without the keys.
the lock or latch needs a lot of oil. Spray inside where the key goes and try to spray the latch inside the door. Pulling the door panel off helps. Oil the window tracks if you pull the panel of while your at it.
I'm stuck trying to figure out how to install the rod keeper clip. Any help? Seems like you gotta slide the clip over the hole and force the rod threw the slit but there's zero clearance and it doesn't wanna poke through. Im considering drilling a hole in it so it can help it along.
Hey Brian what kind of numbers does a bone stock 403 make? I have an 86 Z/28 with a cooked 305, my buddy has a rotted out Cutlass with a low mile good running 403 I can have free! Is it worth it or should I find another 305
My 86 cutlass ignition is broken i turn my car on with a screw driver but it wont shift into gear does the ignition lock cylinder beeing broken have anything to do with it?
When I was 15 my cousin locked her pursue with keys in her trunk. I went through the back seat and a minute later had the purse. Then she freaked over that
Follow Classic Gbody Garage for the latest project updates! Thanks everyone!
Subscribe: ruclips.net/user/classicgbodygarage
FaceBook: facebook.com/groups/classicgbodygarage/
Instagram: instagram.com/classicgbodygarage/
Classic G-Body Garage
What size screw did you use for trunk clip
Great video!! But what about the glove box lock? That’s impossible to find on here
Thanks for these Brian! Your videos have helped a bunch with my cutlass! 🙌
So thankful for your channel man!
Thanks. Big help with my El Co! Pretty much the same set up
I wanted to see how did you installed it
Very helpful video, thanks.
You're welcome!
Thanks for a great video!
Glad you liked it!
Thanks for the walkthrough.
Do have a video on “how to move a g body without the key”? I’m trying to put my car on a trailer without the ignition keys. I bought it without the keys.
Is it possible to change the lock set on the glove box on the G bodies if you do not have the key and unable to lock the glove compartment?
Nice..👍🏿
Thanks ✌️
Had a really hard time getting the keeper and clip back on the new lock cylinder, would have been helpful if you showed that.
ok thanks for the feedback.
Exactly lol he skipped one of the most important parts
Good advice Thanks
Have a 86 Cutlass Supreme door locks are rusted key won't work tried WD 40 many times still nothing any suggestions got to get in it to get it home
What replacement for the trunk latch
Does this work for a 84 cutlass supreme as well?
Great video thanks for sharing
Thanks for watching!
Keep the videos coming.
Why are the new lock cylinders made different
What if your car didn’t come with a lock keeper.... is there a replacement part for that to on a 1982 Buick Regal?
a lock keeper? you mean the lock cylinder? You can buy on ebay and have a keyed.
Can't wait for the cluster video I'm always having problems with my oil gauge. 😭
I wonder if I can take my locks out and get them keyed for the ignition key.. then il only have 1 key
ask your local lock smith
Hi I have a question I have 79 Monte Carlo needs some interior panels what cars are interchangeable
Any 2 door Gbody with that roof line except the rear upper panels.
Does anyone know where or have a link where I can get lock rods or basically all new rods for the door?
How to change manual window to power windows?
For my cutlass when i try to open the door with the key its hard, i have to use two hands to open it, any idea why?
the lock or latch needs a lot of oil. Spray inside where the key goes and try to spray the latch inside the door. Pulling the door panel off helps. Oil the window tracks if you pull the panel of while your at it.
Where can I find the Keeper clip that locks the Lockset rod?
Look up lock rod or door lever rod clips.
I'm stuck trying to figure out how to install the rod keeper clip. Any help? Seems like you gotta slide the clip over the hole and force the rod threw the slit but there's zero clearance and it doesn't wanna poke through. Im considering drilling a hole in it so it can help it along.
Hey Brian what kind of numbers does a bone stock 403 make? I have an 86 Z/28 with a cooked 305, my buddy has a rotted out Cutlass with a low mile good running 403 I can have free! Is it worth it or should I find another 305
Derek Joon 185hp and 320ft tq
Classic G-Body Garage I like the 320 ft tq that would definitely move along better than the 305. Thanks Brian 😃
Where you get the set
can find them on ebay
My 86 cutlass ignition is broken i turn my car on with a screw driver but it wont shift into gear does the ignition lock cylinder beeing broken have anything to do with it?
No the ignition only unlocks the steering wheel. You have another issue going on.
I need a set of locks and trim for my t tops on 81 Calais, how much are they?
MrVigor47 I don't have anything left. Try facebook or ebay.
When I was 15 my cousin locked her pursue with keys in her trunk. I went through the back seat and a minute later had the purse.
Then she freaked over that
What about the ignition?
I don't have videos for that but there are others on YT
Classic GBody Garage ok thanks I’ll look
Auto jigglers are helpful when you are missing the door keys
You really didn’t show us the trunk install or removal let alone the driver side😆
I'm having trouble with my 1983 Oldsmobile
How come no one shows how they got the rod back on the keeper with lock on door?..lol😂
What about the glove box?
jsciarri make sure you grab the glove box lock from the parts car and swap the lock as well or take the lock to a lock smith to match it to the key.
Is the key for the glove box door lock the exact same thing as the door and trunk? If so so I can take the glove box lock to a locksmith.
lol i took the whole day trying to mup the lock but i coudnt so yeah lol
this video stinks dose not show how to put locks back on he edited the main part on how to take the lock off smh, no step by step
Josephine Johnson facts
Exactly I need to know how to remove the keeper on the door lock
Yup for some reason none of the videos show how to reinstall the keeper onto the rod and cylinder. I've been trying g for 2 hours. Any help?