Question I have slab floor not in the basement existing is 9x9 inch vct tiles the plank vinyl is high end and has built in backing should I still use underlayment?? My worry is it being too spongy and possibly damaging itself the underlayment i am thinking of using is Easy Comfort 2mm from Lowes.
I'm seventeen and not a homeowner. Just enjoy watching the videos. But if anything, I feel like more explaining should be neccessary for when you cut around poles and or vents. I know for vents it's kinda straight foward. But for those who still have trouble.
He said it was for further waterproofing. I would at least use it for an exterior or wet wall. PS I’m replacing the baseboards though so, for us, maybe just a bit of foam on those walls, no caulking.
Hi! thanks for this video. I would like to ask if you video guides on how laminate big walls, where you are going to need multiple sheets of laminate, and you have to install them together and make them appear like it's perfectly & seamlessly joint together. It would also be very helpful if you can provide common problems encountered like the condition of the area where laminates are to be applied, and then how we can correct those problems or imperfections?
What if your floor is uneven like kitchen dining room not basement concrete. What can i use to level the floor? should i use a special concrete or something else? Help
I’ve just keep watching how different floor layers work.I did see one on how to level a floor by pouring a product on it but that was on concrete. Good luck.🍀
I flunked math. I’m doomed! lol I notice some put barriers and underlay under the planks. Some use nothing. We are putting a floor like this down and I’m confused how to start. Any suggestions?
So my last plank, according to the math to find the last plank width, is .5”. That’s not good. So how do I fix it? Yours worked out well but mine doesn’t.
@@jeremynguyen2346 Just the same saw he showed cutting length wise to get rid of the tongues for instance. You'd maybe cut your first row planks in half lengthwise.
Why wouldn’t you remove trim first and install to drywall dimensions? You don’t need to silicon or seal anything. Remove trim, add floor, reinstall trim.
I think you would still add caulking for the waterproof seal. There's going to be gaps under the trim, it is hard to avoid that as floors aren't perfectly level.
You WILL damage the walls or baseboards pulling it off, it will also leave gross caulking behind you will need to scrape off if you re use the base boards. if you plan to re paint the room that is an option, you will need to re attach the base boards, fill the holes, caulk it on, and repaint all the trim. Or you can just install shoe molding and move on with you life.
Never wipe 100 percent silicon caulk with anything! You will have a mess like you've never seen. Cut the tube tip small and on an angle. Practice your CONTINOUS caulk bead technique on two pieces of scrape wood with a 90 degree joint. Increase the tip opening until you get the bead size that looks best. Always make one continuous bead, never stop until you absolutely have to. Buy some cheap latex caulk and practice, practice I can't stress this enough! Again, never ever wipe 100 percent silicon caulk! It is not water based. Even Beter yet, install PVC quarter round or shoe molding. I have never seen anyone caulk a floating floor with his method, really odd.
It's an extra measure of precaution to prevent liquid from spills or mopping that may seep under the quarter round trim and reach the exposed edge of the laminate.
You forgot to put the links for the tools in the description!
Where's the "handy reference list" of tools needed that's mentioned at 0:30 seconds?
Awesome. Outstanding and clear instructional video. I'm confident I can begin my first flooring job. Thank you. I shop at Lowe's every week.
Reply stop 🛑 stop ✋ call 📱
NEED TOOL LIST ! CURRENTLY HAVE HAND STUCK IN TOASTER DUE TO UNCLEAR INSTRUCTIONS !!
SENd HELP~ PLZ
The best thing about this video is no loud, stupid-a** music!
I absolutely agree! I hate that!
Your video mentioned about listing the items needed at the bottom. Have not seen anything. Please let us know. Thanks.
There's supposed to be a "handy reference list" in the description - but I cannot see it.
very help full
Wow really good video I give it to Lowe’s. I love this guy.
Wow! Very simple and helpful for a homeowner to follow along! Learned some product names as well! Nice job :)
Question I have slab floor not in the basement existing is 9x9 inch vct tiles the plank vinyl is high end and has built in backing should I still use underlayment?? My worry is it being too spongy and possibly damaging itself the underlayment i am thinking of using is Easy Comfort 2mm from Lowes.
How does it not move around since not glued or nails
Thenk you for showing me tips but how can I stool woodlook tile in randoval?
Is there a needed tool list?
I'm seventeen and not a homeowner. Just enjoy watching the videos. But if anything, I feel like more explaining should be neccessary for when you cut around poles and or vents. I know for vents it's kinda straight foward. But for those who still have trouble.
you are now 21, you still a big dumbass or what?
First video I see adding culking and that foam road?. Is it necessary?
He said it was for further waterproofing. I would at least use it for an exterior or wet wall.
PS I’m replacing the baseboards though so, for us, maybe just a bit of foam on those walls, no caulking.
Where do you get the transition pieces?
Off to watch yet another video to learn how to lay this floor down. With or without barriers or underlay.
You need underlayment
You need underlayment.
Awesome 👏👏👏
When you cut with the saw. What kind of blade. General purpose or a fine cut blade ?
I'm guessing it won't matter since the cut will be under the trim molding.
Fine
80 teeth
Hi! thanks for this video. I would like to ask if you video guides on how laminate big walls, where you are going to need multiple sheets of laminate, and you have to install them together and make them appear like it's perfectly & seamlessly joint together. It would also be very helpful if you can provide common problems encountered like the condition of the area where laminates are to be applied, and then how we can correct those problems or imperfections?
Thanks Steve!
The floor does not snap-together very good
Great video, thanks a lot
What if your floor is uneven like kitchen dining room not basement concrete. What can i use to level the floor? should i use a special concrete or something else? Help
I’ve just keep watching how different floor layers work.I did see one on how to level a floor by pouring a product on it but that was on concrete. Good luck.🍀
Self leveling concrete
Is laminate flooring good to use in a 3 season room in upstate New York?
I would use Vinyl
So #2 board is cut in half 3:45
Thankfully . Mr
I don't know what kind of underlayment to buy.
I think it depends on the manufacturer's instructions. Have you checked that?
@@dmarti47 what is floor underpayment
@@dmarti47 what is floor underlayment
Great video!
I flunked math. I’m doomed! lol I notice some put barriers and underlay under the planks. Some use nothing. We are putting a floor like this down and I’m confused how to start. Any suggestions?
Read the instructions on the flooring you buy and it will let you know if it needs anything.
This is cool...might do this in my house
Hey Doug Heffernan, you lost me when you said "Hi" !
Question: how prone to creaking is laminate flooring?
You shouldn’t have any creaking unless you’re actual subfloor is creaking
You put in expansion gaps on the floor trim. 😅
trim really should have been removed lol
So my last plank, according to the math to find the last plank width, is .5”. That’s not good. So how do I fix it? Yours worked out well but mine doesn’t.
You would cut your first row to have a smaller width, which will increase the width of the last row
@@rittau what tools are needed
@@jeremynguyen2346 Just the same saw he showed cutting length wise to get rid of the tongues for instance. You'd maybe cut your first row planks in half lengthwise.
Excellent, easy to follow instructions.
Why wouldn’t you remove trim first and install to drywall dimensions? You don’t need to silicon or seal anything. Remove trim, add floor, reinstall trim.
I think you would still add caulking for the waterproof seal. There's going to be gaps under the trim, it is hard to avoid that as floors aren't perfectly level.
@ that makes sense
I can’t get mine to fall down
Why didn’t he use a rubber mallet to make sure the floors latch together?
i m addicted to this store. Why arent u guys opening in Israel?
٦ختاا
Why not remove the baseboard ?
You WILL damage the walls or baseboards pulling it off, it will also leave gross caulking behind you will need to scrape off if you re use the base boards. if you plan to re paint the room that is an option, you will need to re attach the base boards, fill the holes, caulk it on, and repaint all the trim.
Or you can just install shoe molding and move on with you life.
Why wouldn't you flush out your flooring with the wall not the baseboards
Because the baseboards were already installed. Ideally the baseboards would be installed on top of the flooring.
Let me work for you please
Wao I love this
Clicking down the floor is easy...the math is the hard part.
If someone sees this please help I’m 15 trying to do this with my dad and he is a mechanic so this is different to us someone PLEASE HELP
Just look at the videos. Think of it like a really large but easy puzzle.
How did you and your Dad do on laying your flooring? I thought the video was extremely helpful.
Never wipe 100 percent silicon caulk with anything! You will have a mess like you've never seen. Cut the tube tip small and on an angle. Practice your CONTINOUS caulk bead technique on two pieces of scrape wood with a 90 degree joint. Increase the tip opening until you get the bead size that looks best. Always make one continuous bead, never stop until you absolutely have to. Buy some cheap latex caulk and practice, practice I can't stress this enough! Again, never ever wipe 100 percent silicon caulk! It is not water based. Even Beter yet, install PVC quarter round or shoe molding. I have never seen anyone caulk a floating floor with his method, really odd.
Does not matter , it's cover with shoe, it's not a countertop or shower joint
Thanks skipping the complicated parts where you have to shape and cut around radiator covers and door frames
John Goodman: I never acted this film, I swear!
Yes you and everyone else thinks that background music is helpful NOT! Great instructions though
Wtf man my floor won't go.together so easy
You are supposed to remove baseboard, rookie!
I was gonna say???
Too too tsß
The silicone is unnecessary
It's an extra measure of precaution to prevent liquid from spills or mopping that may seep under the quarter round trim and reach the exposed edge of the laminate.
Without it, the warranty is void on this particular flooring.
call a professional...