Great video. There are some physics errors, @6:30 you show the propeller blades pitching downward and creating lift (that would actually create negative lift and the heli would drop unless your flying inverted. the flybar paddles only react when you tilt the swash, when you raise the swash plate, the flybar paddles cannot both tilt up or down since they are rigidly attached to each other. only the main blades pitch up,hope this helps a little bit :)
Your dead right! How can someone go to the this much length making a video, & make such a monumental error! It's like when big box-office movies have technical errors, that are immediately noticeable to anyone with half a clue, for example; when they show a 4-stroke dirtbike, & they dub over it with the sound of a 2-stroke, or verse visa! 😅
Sorry for the late response. We did most of the animation by keyframes, so you just move something and the program will fill in the frames in between. Otherwise, you can look up how to write scripts and formulas for making stuff spin on their own.
We want to see direct video of a helicopter bled function and Bearing , liver , bled , wheel , etc . AND LIVER FUNCTION UPPER AND DOWN WHY IT IS FLYING BY LIVER UP AND DOWN ? WHY LEAVE THE LAND BY LIVER MOVEMENT.
Hi! I don't know if you noticed but there is a mecanical problem : you reversed the small connecting rods in the rotor head (the little one should be connected to the little side of the "swing" (I don't know how to call it ^^)). This mistake create another problem : blades heads are turned (the screw should be up and the nut should be down). I noticed because I am repairing an old Honey Bee CP2 and your video helped me a lot but I couldn't use it because of vibrations... I finally understood the problem :D Anyway, thanks a lot for your video!!
Really the best my eyes have ever seen. And of course I saw pc-games an tv-films etc. But your project is the best I have ever seen. I am wordless. It's unbelievable !!!!!!!!!
That video was actually imposible to make so good job proving reality wrong. They should include assembly instructions on dvd when you buy a rc-heli like this video and replace those manuals that are the size of the phone books.
Thank you for teaching me so much in one video.Would you be interested in making a presentaion of an aeronautical project?It´s a patented device created by me. Tadeo Carvalho.
Doesn't need to have a pitch change mechanism when the tail rotor is driven by it's own electric motor. The motor alters speed to counteract the changes in torque during flight manoeuvres & for yaw control. This system is used a lot on small RC helis because it works fine, takes up less space, & is lighter than using another servo with associated drive shaft/belt & aforementioned mechanism.
WOW!! AWESOME work!! 10 out of 10!!!! It seems like the tail rotor is spinning in the wrong direction in your animation, should have been spinning counter-clock wise... Still, AWESOME work!! Wish I had your 3d MAX skills, lol.
![[HORROR] Arkansas: Dump Truck Flips Over, Dumping Load Of Asphalt On Little Red River Bridge](/img/1.gif)
sensacional ,melhor video explicativo já visto .
Excelent. Very nice animation. Congratulation.
Very nice video and good work
Fantastic
Interesting that the algorythm decided to bring this back to life after 12 years.
Great video.
There are some physics errors, @6:30 you show the propeller blades pitching downward and creating lift (that would actually create negative lift and the heli would drop unless your flying inverted.
the flybar paddles only react when you tilt the swash, when you raise the swash plate, the flybar paddles cannot both tilt up or down since they are rigidly attached to each other. only the main blades pitch up,hope this helps a little bit :)
Your dead right! How can someone go to the this much length making a video, & make such a monumental error! It's like when big box-office movies have technical errors, that are immediately noticeable to anyone with half a clue, for example; when they show a 4-stroke dirtbike, & they dub over it with the sound of a 2-stroke, or verse visa! 😅
it looks like you enjoyed producing it
Muy buen video
Nice video ..good work but you should inverse the blades 6:17 ..in this case the plane dive and lift force go down
Awesome
gooood job !!
very nice
Amazing. Even 13 years later rocks..!
very nice
SPLENDID VIDEO!
Sorry for the late response. We did most of the animation by keyframes, so you just move something and the program will fill in the frames in between. Otherwise, you can look up how to write scripts and formulas for making stuff spin on their own.
We want to see direct video of a helicopter bled function and
Bearing , liver , bled , wheel , etc .
AND LIVER FUNCTION UPPER AND DOWN WHY IT IS FLYING
BY LIVER UP AND DOWN ? WHY LEAVE THE LAND BY LIVER MOVEMENT.
Hi
I understand about a movement blade 50 % thank you for show me
Hi!
I don't know if you noticed but there is a mecanical problem : you reversed the small connecting rods in the rotor head (the little one should be connected to the little side of the "swing" (I don't know how to call it ^^)). This mistake create another problem : blades heads are turned (the screw should be up and the nut should be down).
I noticed because I am repairing an old Honey Bee CP2 and your video helped me a lot but I couldn't use it because of vibrations... I finally understood the problem :D
Anyway, thanks a lot for your video!!
Aka DogBone connectors. Noticed 💯
Boyle faydali vidyo gormedim tesekkurler
Really the best my eyes have ever seen. And of course I saw pc-games an tv-films etc. But your project is the best I have ever seen. I am wordless. It's unbelievable !!!!!!!!!
🤟👍👍
insane !!! =D
very nice helicopter
@MrTadeo01
Sorry, I'm not making these kinds of animations anymore...best of luck to you!
Nice
That video was actually imposible to make so good job proving reality wrong. They should include assembly instructions on dvd when you buy a rc-heli like this video and replace those manuals that are the size of the phone books.
pitch angle is reverse.
nice
Hiii
Thank you video..👍cảm ơn video rất hửu ích♥️
Nice
Awosome
رائع
bueno
Bonsoir comment tu peux m'aider a construit un appareil comme ça stp ,tu peux donner ton numéro stp☎
Very nice! wish I could hire you
How to make E128 helicopter remote control
Neat!
Thank u..
Helicopter ka martial naam
boa animasao
this video is nice but it is very fast
Wow very nice
buen video
Thank you for teaching me so much in one video.Would you be interested in making a presentaion of an aeronautical project?It´s a patented device created by me.
Tadeo Carvalho.
Complex 😉😯😯😯
Thankyou for this video.İ shall make helicopter
what the fuck! nice video
Very nice video. Helped me a lot in understanding how helicoptor works. Thanks alot.
Very nice
Nice
can you share the 3D plans
Show!!!!
man you are good on 3d modeling... congrats.
Top
Muito bom
Thanku
good video
great, it could make me inspiration to make your own rc helicopter, thanks
gud am po saan po nkakabili ng batery 3.7v pang rec helicoter sir
Ficou incrível !
no pitch or servo controller for tail rotor.
Doesn't need to have a pitch change mechanism when the tail rotor is driven by it's own electric motor. The motor alters speed to counteract the changes in torque during flight manoeuvres & for yaw control. This system is used a lot on small RC helis because it works fine, takes up less space, & is lighter than using another servo with associated drive shaft/belt & aforementioned mechanism.
awesome awesome
песню откуда скачал
I want to watch the explain for a quatcopter. Can u?
@Brigido- Sorry, this was a one-time project, I'm not doing much animation anymore. Best of luck to you!
Ok
Ye e128 rc helicopter achha hai
i love this
Supeeer supeeer supeeer find
Very instructive....! thanks for sharing .
畫重點
1:55
下面的圓三支點連接伺服器..控制前後左右及上升下降
上面的圓兩對支點與軸一起轉動連接上面的螺旋槳
Seems so overly complex. Then I looked at the date xD
It was a semester project, so it took about a month, after we learned how to use 3D Studio Max.
thnks for your upload
Legendary!
thank you for this video
อยากได้ๆราคาเท่าไร
WOW!! AWESOME work!! 10 out of 10!!!!
It seems like the tail rotor is spinning in the wrong direction in your animation, should have been spinning counter-clock wise... Still, AWESOME work!!
Wish I had your 3d MAX skills, lol.
W
Very good, 5 stars :)
Beyond my imagination
2019 any one