Durma - Press Brake | Deep Box Forming

Поделиться
HTML-код
  • Опубликовано: 23 окт 2024

Комментарии • 58

  • @finisher3x
    @finisher3x 2 года назад +1

    I wish I could show this video to some of our Press brake operators. But the fact that this guy isn't wearing any PPE, makes this a no-go.

  • @jefferysoles1715
    @jefferysoles1715 3 года назад +11

    If he had the top punch the same length as his longest bend he could have bent the two short sides first and finished the two long sides with out moving anything. Guess he had to show all the perks of the machine.

  • @staffanoberg2538
    @staffanoberg2538 2 года назад

    If there are high surface finish requirements when edge bending/press brake, the Swedish product Tribotextil™ can be applied in the bending/pressing tool and mechanically protect the sheet metal from scratches and other damages. Tribotextil™ is an extremely thin and very strong textile that in this process replaces lubricants in the tool.

  • @buildthings79
    @buildthings79 6 лет назад +9

    Did any you guys ever stop and think maybe thats the tooling size they had in the shop. Not every job justifies buying custom tooling. Maybe they had a longer upper punch enough to do the long side but not to close it. And a smaller punch to close it up. Besides since he didnt already have the short punch loaded then he was probably just doing that one box.

    • @get-the-lead-out.4593
      @get-the-lead-out.4593 6 лет назад +5

      buildingthings79,
      Exactly, point well made but the idiots won't listen and just went onto the next video being a youtube know-it-all

    • @xx-ps5qv
      @xx-ps5qv 6 лет назад

      the shorter punch was the same as the longer one, he just added another tool holder. could have just added those holders to the long punch. and this guy works for the press company, so he can definitely get the right tooling.

  • @KushyKaar420
    @KushyKaar420 6 лет назад +1

    Let's make this simple this guy is a Durma Tech (I've had conversations personally with him) he is not an operator either way the box was fully formed

  • @Muzlai
    @Muzlai 3 месяца назад

    A lot of "experts" in the comment section obviously don't understand what is going on. At the beginnig of the video the operator is using standard setup for bending. Tool clamp + tool. He can't close the box with this setup, because the tool clap + tool combination is too short. In order to close the box he needs more height, so he removed a tool clamp from the machine, and stacked two tool clamps together. The second setup is tool clamp + tool clamp + tool, so he gets the extra height. There's nothing wrong with this method.

  • @kaducastro889
    @kaducastro889 5 лет назад +3

    You do not have to keep off the easel.
    And you do not need to mount a smaller punch to do the last two folds.
    He just needed to fold the smaller tabs first and finalize on the two larger, simple tabs!
    With just a punch in the machine it would do everything and much faster .....
    And the smaller flaps of 15 mm could be at the end with a cut of 45 ° that would give a better final finish in the piece.
    Thinking before manufacturing anything is necessary ...

    • @pankajpatel5264
      @pankajpatel5264 5 лет назад

      I thought you would good experience in fabrication.

  • @pedroportalatin6751
    @pedroportalatin6751 3 года назад

    I miss fabrication I was a press brake operator for 20yrs I am retired .I started in a small air brake press.

  • @mariagee3220
    @mariagee3220 8 лет назад +6

    should have measured the longer size then put the tooling measuring the longer side hit the small first then close with bigger

    • @hugoradiorepairsmartel514
      @hugoradiorepairsmartel514 7 лет назад

      Maria Gee yes!!! I Was pulling my hairs off when I saw him lol

    • @mattwebster24
      @mattwebster24 6 лет назад +1

      Right. If i set up that job like that id be receiving an ass chewing before completing the 1st part.

  • @محمودسيدالمطري
    @محمودسيدالمطري 5 лет назад

    How much the computer 's rotation price in Egypt is three meters

  • @SaleCNC
    @SaleCNC 4 года назад

    Thank you excellent

  • @Ashstrodamus1
    @Ashstrodamus1 6 лет назад +5

    He would've had to move a whole lot of those upper clamps for a one-tool setup. Lot of armchair bendologists here.

  • @abdelalava675
    @abdelalava675 8 месяцев назад

    Se puede comenzar el plegado por el lado más pequeño y acabar con el lado más grande.

  • @garethanthonyclark4879
    @garethanthonyclark4879 5 лет назад

    The machine seems very loud?

  • @amadeuszn5475
    @amadeuszn5475 9 лет назад +2

    newbie operator?

  • @matthewsaunders3576
    @matthewsaunders3576 3 года назад

    Nice but be nice if you had a pedal you could move closer you were always stretching a bit far to press it lol

  • @purpledude5526
    @purpledude5526 4 года назад +3

    That is prolly the weirdest setup I have ever seen in my life

    • @phillipcraggs6202
      @phillipcraggs6202 3 года назад +1

      just a demo. no need to go through all the time of a setup.

  • @asrafalikhan5213
    @asrafalikhan5213 5 лет назад

    Program set or gej set and new sit program set

  • @Dwarf19864
    @Dwarf19864 4 года назад +2

    I know this is old video, but my company just sold our old work horse... :cry:
    yes our old durma did leak oil.. it was hard to use, it smelled bad and only few people could use it (rest were too scared to use it) but it had one quality that made up all of it's flaws...
    it just didn't give a F*ck
    wanna bend 6mm sheet that has hole near the bend line? well just tell durma that you have v48, but use v24 and just up the tonnage.. it doesn't care...
    our newer machines are so smart that if you try to do that they notice, turn the screen red and lift the blade -.- damn safety features...
    one of our workers actually managed to bend a small upper blade into a U-shape with durma.. he forgot the machine in manual mode and lowered the blade while talking sh'it to a co-worker ^^
    Durma is really a great machine to work with, if you just need to get the job done, one way or another. It's not easy to use, or as pretty as the new machines... but it get's the job done...
    but yeah... bye bye beautiful, i'm gonna miss you when i try to bend 10mm flat bar on this new and shiny press brake from italy.

    • @KushyKaar420
      @KushyKaar420 4 года назад +1

      Spoken like a true hero I still use them at the shop I work at every day. We have 2 220s, a 330, 440, and 1100 ton presses. They are work horses and get the job done. I don't even have to lie to mine I've formed 6.4mm mat'l into a 1" V die (with a gooseneck punch cause I got balls). They've worked miracles for me and will continue to in the future I'm sure.

  • @MrWyld515
    @MrWyld515 10 лет назад +4

    Why not set the tooling up to your longest press size, the press the smaller then the bigger. Would of saved all that pissing around

    • @marcomendoza8789
      @marcomendoza8789 8 лет назад

      +Talies Cull Preach it brother. This guy is a rookie.

  • @Sotnek79
    @Sotnek79 5 лет назад

    Nice! I would do that kinda sh*t all day.....in my younger days.....

  • @mircosettimo3863
    @mircosettimo3863 10 лет назад +1

    buona dimostrazione macchina pratica

  • @bigbubba6032
    @bigbubba6032 3 года назад

    always wear gloves, safety glasses ( no good on top of the head ), earplugs, and steel toed shoes.........safety lights are a must

  • @samsmith3432
    @samsmith3432 9 лет назад +1

    helped me, where is your video naysayers?

    • @robert6106
      @robert6106 10 месяцев назад

      No one was making videos decades ago but sure if it is not on video these days its not true.

  • @get-the-lead-out.4593
    @get-the-lead-out.4593 6 лет назад +2

    Let me guess, the thumbs down are the nazi safety police who said oh my my he should be wearing safety glasses and hearing protection! Gloves, yes because of the very easy possibility of getting cut handling the metal

    • @jimmurphy4703
      @jimmurphy4703 5 лет назад

      Get-The-Lead-Out.45 no gloves they are a hazard on a machine like that . De burr the box before handling it .

    • @panan7777
      @panan7777 4 года назад

      Metal demands blood. 50 years in the shop. ;))

    • @robert6106
      @robert6106 10 месяцев назад

      No coveralls, gloves, ear protection or light guards is not a good idea if you operation that machine. Sure a one off piece for the camera will do no harm, but a 8 or 12 hour shift utilising that investment to its fullest will shred your hands and clothing leading to injury and Dermatitis.

  • @mustang50yrs55
    @mustang50yrs55 9 лет назад +3

    at the shop i worked at ...he would have been written up for having his safety glasses on top of his head and not wearing gloves and a lot of wasted turning the part around

  • @pedrozucoly3021
    @pedrozucoly3021 3 года назад

    DOBRADEIRA 10

  • @davidronco1470
    @davidronco1470 2 года назад

    No se puede trabajar peor en una plegadora de CNC. Sin guantes, sin un orden claro de plegado, sin una preparación previa del utillaje, con unas gafas supuestamente de protección en modo playa, sin un uniforme de trabajo ni botas protectoras. En fin si se jubila sin un accidente laboral que le pongan una vela a la virgen.

  • @NS-zw8ox
    @NS-zw8ox 7 лет назад

    А перчатки где?)))

  • @fatihaslan9874
    @fatihaslan9874 9 лет назад +1

    Hersey iyide hani iş güvenliği eldiven nerede kulaklık nerede

    • @Ali-xt6cn
      @Ali-xt6cn 2 года назад

      abd de saat ücreti 15 dolar. sana verseler o parayı çıplak çalışırsın

  • @johnbbrr
    @johnbbrr Год назад

    This guy did it all wrong with his setup he's obviously a beginner

  • @vicgravelrides
    @vicgravelrides 7 лет назад +1

    talk about doing wrong that would typical of durma

    • @hugoradiorepairsmartel514
      @hugoradiorepairsmartel514 7 лет назад

      freedom Cycling we send one of those to The scrapyard last week, just 5 years old, The computer was unfixable and everything Was worn out

  • @yanick7883
    @yanick7883 9 лет назад +2

    Beginner..

  • @KishoreKumar-xd5qu
    @KishoreKumar-xd5qu 4 года назад

    Mera what Yahi Hai Main Bhi Yahi kam karta hun