OLD 2 Stage Air Compressor ~ Pump Rebuild/Custom Paint ~ RESTORATION Part 3 ~ Is that a Tiger Shark?
HTML-код
- Опубликовано: 3 окт 2024
- Ever want to paint your compressor like a WWII P40 Flying Tiger? I have, so I DID! Watch the custom paint process as well as the complete rebuilding of the compressor pump.
In this video I will show you how a 2 stage compressor works, how it comes apart, and then how it all goes back together!
Not to mention my AWESOME Tiger Shark airplane paint job!!!
The Compressor pump being restored is a Saylor Beal Model 705 Air Compressor from the 1970's. It is on a 120 gallon air tank, and being powered by a 5 HP AJAX Electric Motor that spins at 1725 rpm... Low & SLOW! Just the way these air compressors like it!
I took the compressor pump COMPLETELY apart so I could show you every single part and what it takes to fully rebuild a compressor like this!
I got all the parts needed to restore this compressor from Pacific Air Compressors.
www.pacificair...
If you have a compressor that isn't working and needs parts, or you are in the market for a new compressor, please check out Pacific Air Compressors!
My experience with them has been top notch! They have answered the phone EVERY time I call them, and were extremely helpful in diagnosing issues and determining what parts I needed to get these compressors back into service!
Thanks for stopping by!
Be sure to subscribe and ring the bell if you are new so you don't miss upcoming restorations and build projects!
I truly appreciate your time and support!
If you have any suggestions, questions, or comments, please leave them below!
Feel free to donate towards future projects on my Patreon page Below, I would really appreciate it.
★Patreon★ / salvageworkshop
Follow my Instagram for what I'm up to on a daily basis!
★Instagram★ / salvageworkshop
#Restoration #CompressorRestoration #TigerSharkPaintJob
LOTS TO COME!
Question of the Video: Do you like customizing things? If so, what have you customized?
Salvage Workshop I’ve got an old 1970s German moped that I like to tinker around with. I’m too big for it to be fun to ride, but I’ve done it up for my nephew to match those colors of his favorite (American) Football team.
Maybe it's early in the morning for me, but the title in the thumbnail confused me. Should it be "Fuel Pump Rebuild" or "Complete Pump Rebuild"?
@@o0hbomb0o Complete sounds better... good call! Just changed it!
@@TommySleeze Nothing wrong with that!!! I'm sure he loves it!
I'm customising/modifying a series land rover at the minute changed engine and gearbox
Fantastic beautiful restoration of the old compressor 🎉🎉🎉
Worth all 32 minutes to watch! Well done!
I am glad you enjoyed it, I had a MASSIVE amount of footage to cut down from, and I was worried it might be too long! I appreciate the feedback! Thanks for watching and commenting! I truly appreciate the support!
That paint job is mad thanks for shearing this with us may your compressor serve a long life for you kind regards ron😊
You are a MASTER of Restoration!
Thank you! I appreciate you watching and commenting! Lots more to come!
Very cool! I love old nose art.👍
I love that you're basically doing mise en place for your pre-assembly setup.
It makes it MUCH easier during the reassembly process, and for other people to better understand how everything goes together! Thanks for watching & commenting! Lots more to come!
.....Excellent videos......no excessive talking which helps in keeping track of what the viewer tuned in for........Five Star Channel......🌟🌟🌟🌟🌟........
Much appreciated! I talk in some of my videos, and will talk in future videos, but I like to let the work speak for itself!
Great series, so meticulous. I love both the creative and the cleanup equally. Impresssive
I truly enjoy the process! Thanks for watching and commenting!
Nice job. I loved the detail, the paint job and the artistry.
Then there was the Roman prentice who said, "you want me to stand where?"
Thanks for the videos, great series.
I was looking for parts for my Kellogg America single stage, I think it dates to the 60's, just bought a HF two stage, it should be fine.
Your ability is very impressive. You do a really great job. I have an old Moto Mower power mower I'm going to refurbish as a winter project. The mower was manufactured in the town I'm from many years ago and my dad worked there for a few years back in the 50's. It was one of 7 lawn mower manufacturers in the town back then. They're all gone now and the mower I have is rare. Thanks for what you do and sharing it.
Hoodie, I just found your channel.
What I’ve seen so far I like.
I used to work for a compressed air contractor that sold and serviced
Sailor Beall compressors.
I must say yours came out just as good if not better than the new ones
were selling in the late nineties.
In my opinion they are the best small reciprocating compressors!
You got a winner there.
And a pat on the back to your wife for finding them.
Wonderful jobs
Awesome... Simply Awesome!
Helluva Resto. Wish I had the know how and patience!
Very impressed at the detail, what a crown jewel of a compressor! Love it!
I love to customize things. Some of my favorite customization is inspired by Chip Foose. He said' not a quote, some of the best customization is the small little things that you don't notice, if you didn't know better where how it was always supposed to be. Tuck that bumper in a couple of inches, change the fit of an emblem or light just a tiny bit, you'll never realize it's all that was done but it looks better and like it was always that way. Of course I like the wildly radical stuff too when done right. Your tiger shark for example is amazing.
Very good job...
Thank you! I appreciate you watching and commenting! Lot's more to come!
Beautifully executed restoration of a fine piece of American made equipment. Well done young man it will serve you an entire lifetime.
Your organization is meticulous, but I am sure the more complex the project, the more organized you have to be! I love the shark decal!
You do high quality work my friend!
Just did my sailor Beale 705 last year I love it runs super good mines a smaller tank and vertical. I love your paint job came out super cool.
Thank you! They are built like tanks!! Great compressor pumps! You probably have an 80 gallon tank which is a great size for almost all garages and shops!
This man is a pro.Thanks for the video.
Stumbled across this while researching how to rebuild my ancient ammonia compressor I use for an air compressor. Enjoyed your video, appreciate the time lapse. You don't need thread sealant on a union, and you always, if the handle position allows it, put the fixed jaw of a Crescent wrench against the back of a nut, and the movable on the front so the torque is applied by the fixed jaw.
Your work is not just the skill, it’s also an art!
This is like a old bogart movie, order a rebuild kit, YOU DON’T NEED ALL THE STINKING GASKETS. great job overcoming obstacles and getting the rebuild finished right.
Salvage Worker !!!! You are a real genius at what you do ,,, you earn every dime ,,,, you are good.
Thank you Harold! I am not stranger to hard work! Thanks for watching & commenting! lots more to come!
Great video!
I thought I was watching Sailing Zingaro for some reason. Great job would look even better in my garage.
I just checked out their channel!! They have the Shark mouth on their boat!! It looks AWESOME! Thanks for watching and commenting! I truly appreciate the support! Lot's more to come!
Hot water pressure washer will fill a big gap in your cleaning process. Great work .
Nicely done, good for another fifty years. Regards, Dave (Canada)
Thanks Dave!! I sure hope it does!
Nice job!
That paint job was over the top!! Love the customizing! I probably don't go as meticulous as you did on this project but I love the old school work. A lot of people would have just bought vinyl.
I thought about the vinyl route, but figured people might like to see what it would take to paint something like that!
Very good job bro 👍👍👍👍
I have an 80s compressor I need to do this to! It looks so cool!
Go for it!! it's pretty awesome once it's finished!
@@SalvageWorkshop now you've got it up high are you going to put a wing on it and a prop on the end?
@@HenRefurb Now, THAT'S an idea!! I had thought about adding foam fins like old school bombs had, but the prop idea along with that might actually happen!! Thanks for the inspiration!
Great Job
cool job
Thanks for watching and commenting! I truly appreciate the support! Lot's more to come!
Beautiful
Outstanding! Cheers
Awesome Restoration and cool paint work... 🇺🇸🇺🇸
Very nice work , you should be proud of yourself, there not to many people that do work this way anymore, great video ,thanks for sharing.
Goodness, I would never get all of that back together. You are good.
It was a fun project!
Great job! End result was awesome!
Much appreciated!
That’s was one awesome build.
Fantastic job. Thanks for sharing.
Very good restoration 👍👍👍
Thank you! I appreciate you watching and commenting! Lot's more to come!
The best air compressed built in this country..American iron..I'm getting one...H.D..IRON..
.
Very well done sir!
Thank you my friend!
Un saludo desde España , muy bueno el vídeo he aprendido mucho
¡Maravilloso! Me alegra que hayas disfrutado viendo! ¡Gracias por ver y comentar! Realmente aprecio el apoyo! ¡Mucho más por venir!
Opening a box with saw. Somewhere wranglerstar is screaming in rage. Lols great video really enjoying all your stuff. I'm bingeing your videos lol. You're safe with opening your boxes with a saw. Nobody listens to Wranglermart lol. I like the fresh take it is something different :D 😎👍🔥
voila une superbe restoration magnifique travail
Merci mon ami!! Je suis content que vous ayez apprécié! Beaucoup est à venir!
Absolutely fantastic 👍🏻
Disassemble is one thing, almost anyone can do that. But reassembling that is the trick. And it takes skill. Very impressive. I have one that I want to tackle it's been sitting in my workshop for about 15 years and it doesn't run. I don't know if I the fortitude to put it together again.
Since you live in a cold climate I would suggest putting a moisture filter on your line so you don't get water into your Air Lines and into anything it ruins your air tools and your spray gun for painting.
Now that you have an air compressor you can get yourself a sandblaster and you won't have to do all that grinding and wire wheel and sanding stuff to take your paint and rust off of your Restorations.
great job
The design isnt to my personal taste, but i think you did a great job and i enjoyed every minute. Thanks for the upload.
Nothing wrong with that! Everyone has their own taste, and that's cool with me!! As always, thanks for watching & commenting!
It took longer to tape it off than it would have to just follow the design. With a brush!!
@@nickmartinez7574 I started that way, but I dont have a steady enough hand to freehand such a detailed image! It would have looked terrible!
Really great work. Your shop must be much larger than it seems. I can't wait for the next video when you bring in the airlines. 😉
Good job
Brilliant restoration. Very well done Sir! Greetings from Southport UK.
Thank you!! I truly appreciate it!
This compressor turned out amazing! Great work!
Nice job ! That's not a cheap compressor !
Especially now!
EXCELLENT JOB!..love the P-40 paint scheme!!
Thank you! I was going for one of a kind, and I think I achieved that! Thanks for watching and commenting! I truly appreciate the support! Lot's more to come!
Amazing job, well done!
See what you did, now I need to get a saw to open my packages LOL Amazing job on this
DO IT!
Yep have to, a knife just wont cut it anymore LOL
Who Cares -- He's channeling AvE. ;-)
Now this has been very interesting, I like the paint job Top Marks on that and the overall restoration has been spot on..And yes you can mount it up there just get some strong people to help lift it up or a block and tackle..Peace
I am glad you enjoyed it! It was a fair bit of work, but the paint job definitely makes it one of a kind!
Awesome restoration.I really like the custom paint job ,It turned out fantastic!
It took a bit of time, but I am definitely proud of it! Thanks for watching and commenting! I truly appreciate the support! Lot's more to come!
Do you realize how many skills one require to do oll this. Great project.
Outstanding!
First of all, Great build. Second, I love the paint job. I think that most of the stuff I have rebuilt or restored has been customized in some way or another, but my favorite would have to be my Opinel 9 pocket knife. I customized the scales to fit my hand and added cross hatch.
I LOVE IT!!!!
Amazing job, came out fantastic!
Thank you! I appreciate you watching and commenting! Lot's more to come!
Looks amazing. Almost new. The only thing I would change is the outlet tube. You don't want moisture running back into the head of the pump. Always drop it down and out from the head. Never up and over.
Thanks for watching and commenting! I truly appreciate the support! Lot's more to come!
As far as putting the compressor up high, unless you have fire suppression system right above it I wouldn't recommend it. The shop I worked at, the motor caught on fire, I mean billows of smoke. The fire department was only three minutes away thank goodness. Keeping a fire extinguisher, Large wouldn't be a bad idea at all. Anything electrical, the appropriate fire extinguisher is a must in a shop environment. Just a tip. Beautiful paint job. I guess a clear coat isn't required to protect the paint. It worked great. You have a photographic memory for putting things bac together. Can't leave any parts off when rebuilding. It could be disastrous. A very, very educational video. Very detailed and proper.
Heck yeah, that's the paint job I was talking about. Looks great.
You hit it on the head when you made the comment!! I think it turned out alright!!
Awesome idea with the projector!
Couldn't have gotten it that nice without it! Trick is realigning it between coats... THAT took some time!
Yes I love customizing... anything and everything I can! It usually makes whatever it is better than original or at least better looking!!! You definitely have patients...that was alot of tiny pieces of green tape to fill in that mouth!!!
I TOTALLY agree! Plus it makes it different from all others and I enjoy that!! YES LOTS OF TINY PIECES OF TAPE!
Just an amazing job...
Thank you! I appreciate you watching and commenting! Lots more to come!
Awesome job love the paint job its really cool looking
Thank you! I am definitely happy with all the work I put into it!
Outstanding job!!!
Great job nice 👍
Your so good at what You do Your a credit to Your Profession , the thing I cant get my head around is You do almost everything Alone , Congrats from the Uk
Old sign painters trick, pad the end of a sturdy stick, then use it to help steady your hand when doing hand painting.
I rarely customize anything, I generally do restorations, but once in a while I'll do something custom on a diecast or the like. I only do small stuff in my kitchen these days. I used to customize real cars.
DUDE! Nose Art... 👀❤
Awesome video! Love your channel. Keep them coming!
Good Job!
Much appreciated! Thank you for watching and commenting! Lot's more to come!
I dont care where you put that thing buddy but i've been mesmerised by your skill with that machine. Kudos friend...I can open up a machine but you can bet there'll be lots of bits and pieces of screws nuts and what nots extras left behind I do not even know where they came from...
I appreciate the tall compliment my friend! I have a bunch of old bread trays, and as I take a certain part of the project apart, all parts from that area go into their own tray so I know what parts go where. Also when you watch my videos, you'll usually see a shot of all the parts disassembled and laid out, and that also helps me in case I forget later! All in all though, I am pretty good about disassembling and then reassembling things! Thanks for watching and commenting! I truly appreciate the support! Lot's more to come!
Show muito bom , saudaçoes from Brasil ......
Estou feliz que você tenha gostado de assistir! Eu aprecio o apoio! Obrigado por assistir e comentar!! Muito mais por vir!
Awesome
Thank you my friend!
Your shop is well equipped. It's all your gathering? It's hard to believe because of your young age. The shop is awesome btw.
Thank you!! Its an evolving work in progress! Yes I acquired all the tools and equipment myself over the years!! Thanks for watching!
Cool build and I love the paint job! 👍
Thank you! It was a fair bit of work, but well worth it!
You are so lucky to get all those parts , I ve been rebuild old compressor like meiji, sanco, boge, etc ... some parts we have to remade, takes a lot of time and headache to rebuild them....
At around the 12:45 mark, I like the AvE box opening tool.
Awesome stuff, well done.
Much appreciated! Thanks for watching and commenting! I truly appreciate the support! Lot's more to come!
I didn't know that sharks can roar!!!
WOW !
Very AvE like unboxing. Love it.
That was a great restoration man!! Awesome job!!!
Awesome job man!! Really enjoyed watching, cant wait to see more !
Oh shoot, where does this part go. I was wondering what you were going to do to repair the parts, now I know. It’s nice that you can still buy parts for old machines.
Runs WAY quieter than I would have guessed.
It is amazing how quiet a professional compressor actually is!
I’ve got the same pump and need to rebuild it too.