Y&H 2200W/3200W Hybrid Inverter Connection, Setup 01SUb Solar Priority Demonstration Teaching Video

Поделиться
HTML-код
  • Опубликовано: 30 июл 2023
  • This is a multi-function inverter charger, combining functions of inverter, solar charger, and battery charger to offer uninterruptible power support with portable size.Bulit in 80amp mppt controller, which integrates solar energy storage &means charging energy storage and AC sine wave output.It can be widely used in DC to AC areas, such as solar AC power system, vehicle system, RV power supply, security monitoring system, emergency lighting system, field power system, household power system, etc.
    Now we will demonstrate and explain the operation of this machine for you:
    1.How to connect the machine correctly:
    The first is to connect the battery. Note that the positive and negative poles of the battery cannot be connected with the positive and negative poles of the machine.
    Connect to AC input.
    Connect PV input.
    2. Turn on the inverter switch, turn on the AC input switch, and turn on the mains, and the LED will change from blinking to steady on.
    Turn on the PV input switch.
    Turn on the AC switch.
    In this way, insert the fan plug into the socket, and you can see that the fan is running normally.
    3. Next is to choose settings.
    Set 01SUb(PV Maximize Power Generation Setup), Setting 16 option, C50, Solar Priority Charging.
    Setting 12 option, battery low voltage to mains charging, When the battery voltage falls be;ow the set value(11.3V)
    Setting 13 option, battery high voltage to battery power, When the battery voltage is higher than the set value (13.5V)
    In this way, the sun is strong at noon, and the solar energy supplies power to the load.
    Note: The battery must be connected first, otherwise it cannot be started.
    When the sunlight is weak, the battery will assist the power supply.
    When the battery voltage is lower than the 11.3V we set, the battery will stop working, and the mains will automatically supply power and charge the battery.
    When the battery voltage reaches 13.5V, the utility power stops supplying power and switches to battery auxiliary power supply.
    4. BMS lithium battery communication
    If your battery BMS system is PACEEX.05 option set Lib. you can view the lithium battery voltage through the inverter LCD
    Settings are user-defined to connect a lithium iron phosphate battery
    Setting 05 option USE
    26 Option to set charging cutoff voltage 14.4V
    27 Option to set charging cutoff voltage 14.4V
    29 Option sets the stop discharge voltage 10.8V
    5. Next is the sequence of inverter terminal opening:
    Close the AC input
    Close PV input
    Turn off the AC output
    Turn off the power of the inverter
    Finally disconnect the battery
    If you want to know more about this inverter, you can click the link below to jump to the product page and download the instruction manual of this hybrid inverter
    Website:
    www.yonghuisolar.com/
    2200W inverter link: www.yonghuisolar.com/products...
    3200W inverter link: www.yonghuisolar.com/products...
    Facebook:
    / yonghuisolar
  • ХоббиХобби

Комментарии • 37

  • @fauxque5057
    @fauxque5057 11 месяцев назад +2

    You're about the only one who actually uses ferrules on stranded wire. It's the right way to do it.

    • @yonghuisolar
      @yonghuisolar  11 месяцев назад

      Thank you for your praise. Our technicians have more than ten years of work experience, and they are also able to do some small details.😁😁

  • @jamesjjs2
    @jamesjjs2 10 месяцев назад

    I adapted two fan Noctua - nf-a6x25 flx in an inverter similar to it. I changed the position of the temperature sensor the right side to work. It was be great. Finished the loud noise.

    • @yonghuisolar
      @yonghuisolar  10 месяцев назад +2

      Hello, yes, the sound of this kind of machine is a bit noisy when it is working, so we generally recommend that customers install it away from the bedroom.

  • @saintsaint8482
    @saintsaint8482 Месяц назад +1

    Can I use this Imverter with only solar panel with battery?

  • @Billie-solarproduct
    @Billie-solarproduct 8 месяцев назад

    Cool! and now a new portable solar panel is coming out, and it's Perfect for hiking, camping and garden. foldable and portable.

    • @rx_mattskii
      @rx_mattskii 4 месяца назад

      Lol 😅 exactly what I thought too!

  • @mikepeck6633
    @mikepeck6633 Месяц назад

    Hi, just a few questions about the 2.2kVA(1800W) unit:
    1) What size/type of breakers would you use for 2.2kVA/12V/230V for UK use in camper setup i.e. AC IN/OUT, inverter to battery and PV?
    2) Can you use a metal (backing) base for mounting?
    3) When it says 55-450V for the solar(PV) voltage, does that mean Voc?
    4) What minimum Ah battery would be recommended?
    Many thanks - Mick

  • @DavidSmith-qp7yk
    @DavidSmith-qp7yk 19 дней назад

    what are those cables called the one you use to connect the AC in an AC out? do they come with the unit when you buy them? Does the battery connection also come with the unit?

  • @adb8478
    @adb8478 3 месяца назад

    Hi. Could you please check if the inverter has USB (Utility first) as an available output source priority (parameter 01, in the manual only appear SUB and SBU)? Thanks!

  • @haroonharoon2315
    @haroonharoon2315 3 месяца назад

    Amazing ❤❤❤❤

  • @captainpacific6796
    @captainpacific6796 3 месяца назад

    Option 26 and 27 are same(charging cutoff voltage)? In my manual option 26 bulk charging voltage and option 27 floating charge voltage. Are you sure options 26 and 27 could contain same settings 14.4V for lifepo4 battery?

  • @MkatekoChestar
    @MkatekoChestar 25 дней назад

    Sir Does the inverter run if u remove pv and Ac cables but plugged to the battery only can u able to run appliances?

  • @jaromirluzar2625
    @jaromirluzar2625 3 месяца назад

    hello everyone, I have an SP-3200 but I don't have an option in the settings [5] lib, I only have agm, fld, use, is there a way to set it to lithium batteries? possibly there is something like "firmware update" thanks

  • @Tumbleweed5150
    @Tumbleweed5150 11 месяцев назад +1

    I would advise folks to add a fast-breaking T-class fuse as close to the battery positive as possible. I was advised that 7" or nearer was best.

    • @yonghuisolar
      @yonghuisolar  11 месяцев назад

      Yes, a circuit breaker must be used between the battery and the inverter.

  • @seobotsengmoloi8767
    @seobotsengmoloi8767 2 дня назад

    Can this inverter work without AC

  • @kamamahoe3248
    @kamamahoe3248 5 месяцев назад

    Does anyone know what caused an error or fault code 10?

  • @Tumbleweed5150
    @Tumbleweed5150 11 месяцев назад

    Is this available in the USA, or if not, when do you folks plan on marketing it here. I have lots of off-grid friends who would LOVE the 12V version of this! Thanks.

    • @yonghuisolar
      @yonghuisolar  11 месяцев назад

      Hello, we sell this in the US, you can place an order here, this one is shipped from the US
      www.yonghuisolar.com/products/y-h-2200w-solar-hybrid-inverter-max-pv-2000w-dc55-450v-input

    • @Scott-ig1zd
      @Scott-ig1zd 10 месяцев назад

      @@yonghuisolar 230v single phase is EU spec, your 2200w aio would be perfect at 120v single phase for small off grid cabin.

  • @luigibetnunez4550
    @luigibetnunez4550 2 месяца назад

    Hola! Donde se puede conseguir piezas de repuesto?

  • @rolf8384
    @rolf8384 4 месяца назад

    Hello Y&H, I can't say anything about the quality of the product and it may be ok, I myself ordered the version with 1500W but the operating instructions clearly stated that this inverter must be installed on concrete or masonry. Therefore it was unusable for me and I returned it. But that's exactly when it becomes clear who you're dealing with. Long story short: Apparently no return label could be printed and I had to pay in advance. I did it. Now, 4 months after Ebay's case was decided in my favor, despite photos of the receipt, shipping label and tracking number, Y&H has not refunded anything, Y&H is demanding the shipping costs back. Since it is normally sent to me via Paypal, this is possible. These are my experiences do with it what you like.

  • @alejandrobetancourt339
    @alejandrobetancourt339 4 месяца назад

    Porqué el mío siempre tiene el bypass activo junto con el inversor

  • @reynold.lariza
    @reynold.lariza 11 месяцев назад

    this supports LFP batteries?

    • @yonghuisolar
      @yonghuisolar  11 месяцев назад

      Hello, this is the battery type supported by this machine: Seal/AGM/Gel/Flooded/Lithium.

  • @user-ro5bv6er2t
    @user-ro5bv6er2t 8 месяцев назад

    Super maintenant comment installer appareil kp55k3-ss

  • @herbertpalines4695
    @herbertpalines4695 4 месяца назад

    Hello! Will the inverter work even without a battery yet? I plan to tie it to the grid first since I don't have yet funds for the battery. Thank you!

  • @BookPaLuy
    @BookPaLuy 9 месяцев назад

    can look system in apk ?

  • @khomrattshop9575
    @khomrattshop9575 9 месяцев назад

    Normally, if there is damage to your device How quickly can technicians analyze and solve problems for customers? *Refers to after-sale service

    • @yonghuisolar
      @yonghuisolar  9 месяцев назад

      Hello, if the customer can provide accurate information, the cause of the failure can usually be determined quickly. However, if the cause of the failure is complex, it is necessary to simulate various possible failure situations.

    • @khomrattshop9575
      @khomrattshop9575 9 месяцев назад

      If so We will experiment together... *** Don't care how long the trial lasts. Until the true cause is found After experimenting, success was found. and equipment that customers purchase and use Use it as a home decoration. Waiting for further treatment...indefinitely😊

  • @ViljarBauman
    @ViljarBauman 5 месяцев назад +2

    I would recommend avoid Y&H products at all. They are selling faulty products and don't provide any customer support.

  • @willierice7153
    @willierice7153 4 месяца назад

    Why isn’t my system reading my 4 100watt solar panels?

    • @alejandrobetancourt339
      @alejandrobetancourt339 4 месяца назад

      Tienes que ponerlos en serie el voltaje tiene que estar por encima de 40V

  • @totogazebac3654
    @totogazebac3654 8 дней назад

    srne brand and deye is better

  • @garrydust1701
    @garrydust1701 5 месяцев назад +2

    My 3200 unit lasted 5 weeks , it burnt out , tried and tried to have a solution , 10 emails later , just totally crap , I lost good money , this company is crap