I followed the instructions at the end of this vid it worked for me : place car in park, turn off the engine, place selector in 4 wheel high, apply and hold the breaks, restart the engine, place the car in drive, place selector in 2 wheel. you should hear it change under the car and the dash should return to normal, place the car in park, release the breaks.
Hi. Thanks! 2012 Xterra 4WD light came on after parked for a few days. I did the same thing you did. Everything worked and the light never came on. Thanks again.
@@MuhammadYousufMaher @Muhammad Yousif Maher yes, passenger side under the hood, lift black lid off compartment there, find a few fuses there, check them all. Jesus loves you!
What worked for me is after all else failed. Turn off 4x4 and it kept blinking for forever. I put the vehicle in reverse and move about 10 feet and and it will instantaneously go off and go to FWD.
Fadi Joy Unfortunately I didn't find solution, I've exhausted all internet option for a solution. Next step will be to take it to the dealer for $100 diagnostics
@@MuhammadYousufMaher there is no physical switch, Its stands for Automatic Transfer Park warning light. the sign with the 4 wheels disappears. The gearbox is stuck in Neutral position and will not park. You need to drive the car forward and backwards a few times to assist in the transfer case to shift to the desired gear selection. you must do it on a flat surface. Switching from your current reduction gear 4Hi or to 4Lo will help. switching the engine on and off and cycling through the reduction gears also helps.
@@saifuddinahmadable Thank you for your reply. In my case 4H 4L and 2 wheel all are working fine but this light turn on after AC leakage maintenance (dashboard removal). After computer reset/fault code reset, this light turn off and 4x4 display was also working normally until I switch off my car and back on. It looks like lose connector/low voltage something because of which when car start it appear again.
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
I followed the instructions at the end of this vid it worked for me : place car in park, turn off the engine, place selector in 4 wheel high, apply and hold the breaks, restart the engine, place the car in drive, place selector in 2 wheel. you should hear it change under the car and the dash should return to normal, place the car in park, release the breaks.
Mine worked fine except I had to go to 4lo.
I did exactly what you said and it worked.
Yup worked for me. Thanks for the video and the write up of how to do this. Not sure what caused it... but I'm so happy for RUclips
Hi. Thanks! 2012 Xterra 4WD light came on after parked for a few days. I did the same thing you did. Everything worked and the light never came on. Thanks again.
pls i have same problem like u, its the same ... did u solved? if u solved what was the problem?
I have same problem its atp switch or relay? Thanks
Me puede ayudar cuando le pongo 4x4 no se ve en el tablero y la quiero regresar al 4x2 y no refresa
Why 4 love keep blinking?
I have the same problem, can you tell me how you fixed it please? Thanks.
20 amp fuse beside transfer hi and lo relays
Was that your problem?
@@dupperskeez Is it resolved? Can you please share details (location) so I can also check this fuse?
@@MuhammadYousufMaher @Muhammad Yousif Maher yes, passenger side under the hood, lift black lid off compartment there, find a few fuses there, check them all. Jesus loves you!
@@dupperskeez Many thanks. I will check. Best Regards,
Did you find solution
What worked for me is after all else failed. Turn off 4x4 and it kept blinking for forever. I put the vehicle in reverse and move about 10 feet and and it will instantaneously go off and go to FWD.
i have same problem same time ... did u solved? if u solved what was the problem?
Fadi Joy Unfortunately I didn't find solution, I've exhausted all internet option for a solution. Next step will be to take it to the dealer for $100 diagnostics
Slonya23 aha i hope u good luck
Did they figure out your issue? I have same problem.
@@Slonya23resolveu seu problema, estou com o mesmo problema e não consigo achar o defeito
I have same problem. Please explain it if solved.
Hai risolto il problema.???ho lo stesso problema..
How is that fixed
You gat to move foword or backord sometimes
Did you find what was wrong?
Hi
Have you fixed the problem?
Did you ever figure this out? My 4wd light comes on and the truck symbol goes away when starting sometimes.
El Capitan its the ATP switch
Its the ATP switch malfunctioning
What’s that atc switch
Can you please share details? What is ATP switch?
@@MuhammadYousufMaher there is no physical switch, Its stands for Automatic Transfer Park warning light. the sign with the 4 wheels disappears. The gearbox is stuck in Neutral position and will not park. You need to drive the car forward and backwards a few times to assist in the transfer case to shift to the desired gear selection. you must do it on a flat surface. Switching from your current reduction gear 4Hi or to 4Lo will help. switching the engine on and off and cycling through the reduction gears also helps.
@@saifuddinahmadable Thank you for your reply. In my case 4H 4L and 2 wheel all are working fine but this light turn on after AC leakage maintenance (dashboard removal). After computer reset/fault code reset, this light turn off and 4x4 display was also working normally until I switch off my car and back on. It looks like lose connector/low voltage something because of which when car start it appear again.
same thing is happening with me
And me what is problem?
Exotic vlogs & gaming any info? Solution? Maybe atp switch?
Code p1819
Habla español