This is hands down one of THE best Lumber Tycoon 2 tutorials that exists on RUclips! So clear and easy to follow along with and very informative. You have more than earned my sub (and notifications turned on) for this, thank you!!!
Thanks this tutorial helped me sell single units of wood to people with gold blueprint! I have made over 7Mil and its only been 8 days! This tutorial is so helpful 11/10 Keep up the good work Aptyn!
What a fine fellow you are! I am from Russia, I have not watched the video, but I immediately see that the video is very cool! I am writing from a translator!
thanks for the tutorail. this will hopefully save countless hours from chopping all of my wood into 1x1 pieces. my abse is super big and i just started building a massive tower that i plan to use every type of wood in too, thanks so much
really good build, but everything was getting jammed so i spent about 1 + 1/2 hours adjusting, but now it works fine!! Thanks! :P (btw i have an auto unloader which goes into this 1x1 cutter which goes into a storage system
@@TheLetterVenus @prince dinero I cant remember well, but I'm pretty sure I made the bit where the wood goes down about a quarter or half a unit bigger so the wood wouldn't get jammed. hope this helps! :p
If your wood is getting stuck, try raising the pressure plate and the funnel conveyor by 1 stud so the wood makes better contact against the funnel conveyor. I tried this and it works better for me.
I had the same problem, you just have to wait until the first one pulls and then it's fine (or if it's been like a minute angle ur camrea down and pull)
for some reason using the pressure plate the pieces of wood don't fall through, so I modified the design to use a laser. However, it's no longer a single unit it's now two units but aside from that, i love this design. Far better than the previous design.
if it cuts into 2 units you could try decreasing the size on the sawmill. if none of the prices fall through it means that your funnel conveyor isn’t gripping the wood so you may need to change the placement, It’s normal for the wood to be cut in an odd way every once in a while and not be able to fall through. but it looks like you have found a good modification that works for you so that’s good!
@@neilrefusekid If you have trouble placing the chop saws, i'd recommend placing down a large floor blueprint or two (dont fill) against the back of the pressure plate and then placing the chop saws against those.
For some reason, a small clog would always happen between the two saws and the pressure plate. I'm not sure if it's only happening to me, but I did add a wire as shown in the video and it doesn't appear to help. This clog is typically easy to fix as long as you don't have a large backup of wood already running to the saws. What I think I'll do to fix this issue is lower the wire by a tile. If I remember, I'll come back to this with an answer.
Omg I found this, build it and loved it. I adjusted it so it could cut bigger pieces (my idea for this was for it to cut the wood into tiny pieces so its easier to transport)
you can also make the wood longer than one unit by putting the funnel conveyor and the pressure plate a bit farther, but keep the saws in the same place
@@Aptyn no i meant thati just load a plot with trees and cut those trees then get more trees and then just keep going on and on, but thanks for replying
For me the wood keeps pushing into the pressure plate and doesn't fall downwards After using this a while it's just a glitch. Just take the piece out that is glitching and cut it manually
Thank you so much aptyn for making this vid its is really usfull i had a struggle trying to find the perfect vid so i found it right now thank you so much!!!
for me, the wood mostly gets stuck due to the conveyor not pulling it down because it has less conveyor downforce than pressure plate. so I would recommend glitching in lasers in between the conveyors trust me it works verry well
i dont think the wire helps with the clogging, when i put a piece through the sawmill it goes to the chop saws as regular but the wood goes up a little bit and i have to remove it manually to keep the machine going
Signal sustains are *behind* the signal delays in link's logic btw
Ok
Why 2 sawmills?
Oh i get it now
It's hard to build in mobile
Where’s link logic
I love when you show us the required materials it’s so helpful
agreed
agreed
agreed
getting all that shit was a hard imagine it without that lol
look in the description 😱😱😱😱
This was so helpful! It even made me organize my extra things.
Thank you bro, i am doing a megabuild and this sped up the process a LOT. Tysm fam!
If you're struggling to put the saws right just place a short smooth wall on top of the pressure plate then place the saw its alot easier
Thank you omg
THEBEST MAN
Bro i instantly got it after i put the eall there thank you
Thank you so much
thanks
If the testing didnt work try put the sawmill to 1.8 x 1.8 because its will work and be a perfect fit on the conveyor. Plus thanks a lot for this.
Thanks mate 😘
False, the minimum is 1.8x2.0,so the smallest cuts work, the diameter is smaller and won't work
This is hands down one of THE best Lumber Tycoon 2 tutorials that exists on RUclips! So clear and easy to follow along with and very informative. You have more than earned my sub (and notifications turned on) for this, thank you!!!
bro thank you so much. My base is like a factory now. It chops stuff so fast, that it works almost too good.
This video is basically what perfectionists look like. He even calculated the prices and everything.
Young aptyn… wait this doesn’t bring back memories, I didn’t like this game that much 2 years ago now! But now it’s one of my favorites
1:31 When you take a bite out of a chocolate bar but then realize it’s soap
Yummy
How do u get chocolate from soap?
@@everythingFLO__ you think its chocolate, but it turns out to be soap
Haah
@@freee8581who’s @everythingFLO_
Wow this has helped me so much keep up the good work I know that 1 day you will be an amazing youtuber keep up the good work
Tysm for this guide it was very clear and I’ve been looking for one like this for years, ur defo my fav lt2 yt
you’re welcome! thanks.
I was just watching a video 2 years ago from this channel and the voice changed so much
Hth
@@highlandeast6183 งง
@@highlandeast6183 yes hth
and it changed again
Amazing! My chop saws are slightly askew but the set up still works! Thank you!
WOW your voice has changed a lot!
Puberty hit so hard
You is no grammer say your don't say you
@@imsoomygoshdream4623 ?? NANI?!
@@WonLeTChuGo I gotta use words that have no grammar for this man to understand
@@imsoomygoshdream4623 ok..
i know this is an old video, but im definitely following this channel, it looks like ot has some really useful content tbh
Thanks for this Amazing tutorial it really helped and it was quick and very easy
Thanks this tutorial helped me sell single units of wood to people with gold blueprint! I have made over 7Mil and its only been 8 days! This tutorial is so helpful 11/10 Keep up the good work Aptyn!
I've made so much money from this thing it's unbelievable. The rich are very lazy so they pay more for simple jobs
What a fine fellow you are! I am from Russia, I have not watched the video, but I immediately see that the video is very cool! I am writing from a translator!
Thank you so much I’m tired of getting 99% on blueprints
It's so funny how he sounds so different in this than his recent videos. It's just crazy how much he's grown
wow this tutorial was so easy to follow and he explained how to do everything so well sub and like earned
Too easy I can even do it. The tutorial I can just watch it one time and then just quickly do it by the way I also used it
Finally you made an “auto cutter” I have an “auto unloaded” I have nether seen any one make an “auto cutter” ❤️🙏🏻❤️. 💕👀😍 thanks
such a detailed tutorial and very helpfull thank you
thanks for the tutorail. this will hopefully save countless hours from chopping all of my wood into 1x1 pieces. my abse is super big and i just started building a massive tower that i plan to use every type of wood in too, thanks so much
Same. earlier I chopped a piece, and it was 99% FILLED
I’ve been playing a while what’s the purpose of this idk
@@daltontube2148 if you have building power you only need 1 unit of wood to fill any blueprint hence the build you see in the vid
@@Guest-zu2mw could you help me get it?
@@daltontube2148 yes
Now my lumber empire isn't a pain for me =) Thank you immediately subscribed to you after i finished building it
Bruh i just finished making the other wood cutter u made and now u post this XD no worries man ill replace it.
Same I finished it around 2 days ago
this man deserves more subscribers
Agree though. He could explain things much better than any other video tutorial.
This man deserves at least 5 million subs
really good build, but everything was getting jammed so i spent about 1 + 1/2 hours adjusting, but now it works fine!! Thanks! :P (btw i have an auto unloader which goes into this 1x1 cutter which goes into a storage system
hello i just want to ask how did you fix the jamming problem??
@@TheLetterVenus @prince dinero I cant remember well, but I'm pretty sure I made the bit where the wood goes down about a quarter or half a unit bigger so the wood wouldn't get jammed. hope this helps! :p
cool! Mine leads to a little basin I made next to my supply depot
the help from this is worth a subscribe❤
This thing is nice!!! This combine with Auto Unloader is so great!
If your wood is getting stuck, try raising the pressure plate and the funnel conveyor by 1 stud so the wood makes better contact against the funnel conveyor. I tried this and it works better for me.
This is so amazing... ima build it now
(even tho I don't have the power or the golden blueprint 😞)
I have for free
,,,,,,,,,,
oh god i love you - met u in game once and u signed my old base :) this is just so u s e f u l thank you
thats lucky!
1:32 perfectly cutted screams
its cut
I love your channel bro like with the trucks n stuff but one question;
Why are you underrated?
wow this tutorial was so easy to follow and he explained how to do everything so well sub and like earned
=P
Wow this is so simple that it took me 10 to 20 mins, the understanding I had was great it is simple efficent, time depends on building skills.
I dont know why but I cant get the saw postion right, I think the building is bugged :/
u the best lt2 youtuber out there ily
thanks :D
remember to have the funnel conveyor pushing down with the handle otherwise it will cause the wood to jam
We aren't idiots
dam thanks dude
@@minonmadman2153 but i am
tysm man u helped me 2 years later
thanks alot
It so good that it can even make players 1 unit chunks
EVERYONE HIS VOICE CHANGED OMG OMG SO CUTE NO CLICKBAIT
It's his brother bru
Not the first time it happened lol
@@irunviewsyt4949 thats him lol, puberty hit :))
Simp
@@kethyanal5397 you a simp
This helped me alot but I was kinda stresseup up putting the sawmill😂 but thx bro this helps alot
Am I the only one that’s struggling to put the cutter on
Nah bro. I know the feeling. Just spent 1 hour tryna get it
No bro ur not…
Nah me is😅
bro, you don't understand how long it took me, my adhd was kicking my ass 😗😗
Bro I thought I got it first try then I realized I didn’t and it took me another hour
Wow this video is so cool! It is so cool I will build it in lumber Tycoon 2
but when is the gaming pc tutorial coming
ultra glitchy gaemring pc will take while til get beter desigb
Pieces of wood get stuck on the pressure plate and sawmill keeps going forever. How do i fix the wood from being stuck?
Lag
I had the same problem, you just have to wait until the first one pulls and then it's fine (or if it's been like a minute angle ur camrea down and pull)
for some reason using the pressure plate the pieces of wood don't fall through, so I modified the design to use a laser. However, it's no longer a single unit it's now two units but aside from that, i love this design. Far better than the previous design.
if it cuts into 2 units you could try decreasing the size on the sawmill. if none of the prices fall through it means that your funnel conveyor isn’t gripping the wood so you may need to change the placement, It’s normal for the wood to be cut in an odd way every once in a while and not be able to fall through. but it looks like you have found a good modification that works for you so that’s good!
@@Aptyn My chop saws can't cut the wood
@@neilrefusekid can you be more specific?
@@Aptyn Like when I place them down it doesn't get into the center of the conveyor so the chop saw doesn't touch the wood
@@neilrefusekid If you have trouble placing the chop saws, i'd recommend placing down a large floor blueprint or two (dont fill) against the back of the pressure plate and then placing the chop saws against those.
How did you construct/wire the auto loader variant visible partially throughout this video?
there is an separate channel that made an tutorial on that unloader
Thank you for the show it accturry worked! Thank you so much for making this video!
For some reason, a small clog would always happen between the two saws and the pressure plate. I'm not sure if it's only happening to me, but I did add a wire as shown in the video and it doesn't appear to help. This clog is typically easy to fix as long as you don't have a large backup of wood already running to the saws.
What I think I'll do to fix this issue is lower the wire by a tile. If I remember, I'll come back to this with an answer.
Nope - a tile lower only caused the wood to get stuck between the wire and the conveyor, while not making it to the pressure plate to begin with.
... Just as I say that, it works - but in a weird way, and only to clog up.
@@gamingderpies the same thing happens to me
@@zydenstarks8771 Did you read my replies to this comment, as well - out of curiosity?
@@gamingderpies I have a problem where it does not reach the pressure plate
im givin a sub 4 this bro. 100% worth it.
if you don't already have the straight conveyors it takes a while to get it took me about 10-20 minutes just a heads up
Omg I found this, build it and loved it. I adjusted it so it could cut bigger pieces (my idea for this was for it to cut the wood into tiny pieces so its easier to transport)
Thank you so much for this video, on the other video I put a hate comment but this is just so good! You earned a subscriber and a Big like!!!!
you can also make the wood longer than one unit by putting the funnel conveyor and the pressure plate a bit farther, but keep the saws in the same place
Can i make the wood thicker or make the conveyors shorter?
if you need help placing the pressure plate you can use a tiny floor and 3 tiny tiles and then place right on it
Hey bro just wanna say thanks it was kinda hard for me at first but then I got it so thanks it looks cool
Whaat your voice it’s awesome I’m watching you since 2018 or 2019 I remember your voice it’s it’s awesome! Have a nice day/night
if your peice of wood is rolling after it hits the pressure plate make sure that the funnel conveyor direction that it sends items is down
thanks man
This is really helpful! Thanks you sir!
thank you! i used the wood droppoff tutorial + this to makean efficient money farm, thanks a million!
auto cutting wood doesn’t increase the value of the wood, this machine is specifically for building with the powers
@@Aptyn no i meant thati just load a plot with trees and cut those trees then get more trees and then just keep going on and on, but thanks for replying
@@Aptyn tho sometimes its impractical when theres a hacker speedhacking around cutting all the wood.
i just watched your video from 4 years ago and bro your voice has changed
Quality channel. Keep it up!
For me the wood keeps pushing into the pressure plate and doesn't fall downwards
After using this a while it's just a glitch. Just take the piece out that is glitching and cut it manually
im having the same problem
I just somehow made 10 unit cutter from this design. Now it's perfect for door bridges if you don't have that thing for 10 mil :D
For mobile players, to place the chop saws easily, u can place 2 floors on top of the pressure plate
Aptyn tysn for teaching us❤❤❤
thank you very much your machine will help me much better lumber channel
the woods that cut in chop saw stuck in pressure plate in fact it no longer automatic it's become individual
this video makes me want to play lumber tycoon, i have 2 mil in cash in it but it was mostly gifted from a friend, because i was new
WOW BRO THAT'S BEAUTIFUL THX FROM ALL OF RUSSIAN COMMUNITY
this video was so good it helped me alot on my sawmill setup
subbed
liked and notified!
Thank you so much aptyn for making this vid its is really usfull i had a struggle trying to find the perfect vid so i found it right now thank you so much!!!
really good video! new sub
Aptyn is the best fr😊
This cutter is satisfying to watch
Wow your voice really changed. Welcome to puberty fellow teenager.
thanks for the in the video, amazing turtorial
for me, the wood mostly gets stuck due to the conveyor not pulling it down because it has less conveyor downforce than pressure plate. so I would recommend glitching in lasers in between the conveyors trust me it works verry well
can you teach me how to do it, the same issue happend to me
Thanks a lot for this it's helps so well
Best channel
I speak Spanish and if I understood perfectly what a good video
well that’s awesome!
I'm having a problem with the sawmax 02l I have the 1.8 by 2.0 but they come out flat and don't touch the pressure plate
thank you so much it helped me alot but it will take time to make it out for money
bro ur pronouncing is so good!
Thx I needed this for my wood shop
this vid helped alot thanks man
AMAZING W APTYN NEW SUB.
i spent an hour trying to put the sawmill in place
You're really underrated.
If you are struggling to put the cutter you can try looking how Aptyn put or tap the top of the pressure plate
I hope it will be helpful
Bro thank you for showing the total price (I already have the sawmill) I had 50k money and I was interested in building this soon
Thank you!
1:31 my fav part of the video WAH WAHHH WAHHHH
thanks, works great :)
i dont think the wire helps with the clogging, when i put a piece through the sawmill it goes to the chop saws as regular but the wood goes up a little bit and i have to remove it manually to keep the machine going
This helped me a lot with lumber tycoon 2
Thanks I have made 3 comments now lol
you a so help full i realy need that ty:)
amazing content my guy