The springiness of the tonearm is because the microswitches which turn the motor on when you move the tonearm away from the rest and then off when it reaches the end of the record are too stiff, and are fighting against the movement of the tonearm. You should alert Crosley to this problem, so hopefully they can fix it in future production runs by substituting switches that aren't as stiff.
@@Recordology Yes, regardless of whether or not it has anti-skate, the arm should never be fighting you like that when it’s resting on the cue lift. That will definitely cause a lot excessive uneven groove wear.
I have a 1974 “Dual” 1226 idler-drive turntable, built in the Black Forest of Germany, this thing is my prized possession. It still has its original super heavy brown tinted acrylic dust cover and original cartridge. I even have the Original Sears branded receiver that my Aunt and Uncle purchased with it. In 46 years not one thing has gone wrong with it or the receiver, never had to go in for servicing of any kind - the sound is clean, clear and really crisp, with the volume literally on 1, music fills the house. They just don’t make them like that anymore.
what brand is the receiver? I started out with a dual 1019 in fall of 2017 that I restored and later that same fall picked up an onkyo tx860 bundled with infinity tower speakers all free btw. I kinda miss that table and that setup but I now have a 1984 realistic linear tracking table that I restored summer of 2019 and klipsch speakers, sony sub, klh center all connected to a yamaha 5.1 receiver from about 2014 and a sony bravia 40inch television.
I just purchased this after watching this review. I couldn’t get the platter drive motor to engage. And the power knob was clearly damaged and wasn’t as nice and crisp as the tuner knob when pressed in. It was mushy feeling. So I returned it, clearly just a bad unit. Second one came super stoked to finally listen to my records. Once again I couldn’t for the life of me get the platter motor to engage when pressing the phono button. I’ve come to the realization that I must be the problem and have given up on my dreams of being a vinyl connoisseur. Thanks though for the great and informative video🤙🏻
Nice system. I was raised on Herb Alpert and the Tijuana Brass. My father still has all of his albums from the 60’s. I still have my Kenwood direct drive turntable I bought back in 1985. Great Review.
Glad to see that the platter is finally the size of the record album. They actually didn’t skimp on material to make it bigger. Looks good and more professional. Nice build with the sides and the lid
When it comes to more "entry level" and all-in-one turntables, Crosley has made some serious improvements. I now expect any Crosley product you review to be passable at the very least (well, most of the time)! I'd still go for the Audio Technica LP-60 if I were in the market for something easy to use and inexpensive, but I think Crosley would serve that market just as well.
That's a nice little unit and one of the better Crosley units I've seen besides their higher end re-badged tables. The one thing that would have been nice is spring clip connectors for the speakers instead of those jacks just in a person wanted to experiment with using different speakers.
Jerry Moss is the M of A & M records. I have a bunch of old Herb Alpert albums. My parents had the Going Places album as long as I could remember. I started collecting more of them in my 20s. Thank you for sharing.
A very good record player from Crosley, I'm well impressed. I like the look of it and it's great to see they've finally built a system with a full album size platter. The tonearm seemed a little springy, but apart from that tiny little issue this is a pretty darn good player. Well done to Crosley.
Gosh, I've always been very negative about Crosley (with good reason frankly), but this looks very decent indeed - I'm impressed; so well done to them!
I can’t think of another player that has a dust cover that’s open at the front! It’s not surprising that you had to slow down the speed. It’s typical for these (for lack of a better term) all in ones to rotate slightly fast. At least with this one they let you adjust the pitch. Now I’m going to watch Techmoan play a chocolate record (though I doubt he’s using one of these)........
I'm tryin' real hard to not like this unit. But it's resisting all my efforts. It's... actually pretty darned good. Two way speakers, decent power output, decent(ish) tone arm, 3 speeds, FM, Bluetooth, aux-in, line-out, headphone jack.... The only other things I could think of to add to it are a tone control of some kind and a proper anti-skate..... but strictly speaking, I don't think they're necessary (a lot of equipment lacks any sort of tone control today, and anti-skate is actually more of a last-nth-degree setting anyway; most record players live happily without it). Better bass could be achieved with larger speakers, but in this price range what you get with this is completely normal and adequate. I'm not gonna BS anyone. It's not a 'high end' unit... but then, it's not supposed to be. If you want high-end, you're gonna have to open your wallet a lot wider, simple as that. But it IS a lot of bang for the buck. I see this as a go-to for someone who's decided to migrate up from a Cruiser or Dansette but isn't ready to go full-bore into a component system. Someone at Crosley is payin' attention. You could do a lot worse than this. A *LOT* worse.
Interesting little unit there and might suit a youngster or for a room with limited space. The tonearm does seem a bit wayward and reluctant to stop the platter when returned to the rest. But, seems a lot better bet than the suitcase items.
I like it, looks good but I don't like the fact that the tone arm is trying to move on you and that the pitch control isn't correct at zero. But it looks to be a nice system, Crosley have gotten better at making tables over the last couple of years.
Hello! Just started watching your videos, which I love. I’m interested in knowing what type of device you would actually recommend for a beginner wanting a system. Not knowing where to start/begin.
Welcome to the fun hobby of records! Here is a good place to start;ruclips.net/video/RoTAaZs3tW8/видео.html AND THIS ruclips.net/video/kmzvSI2IfOI/видео.html AND EVEN THIS ruclips.net/video/FJPpNDQspts/видео.html we have covered so many aspects of playing records and adjusting record players on our older videos...you might find something interesting to watch on our playlists too!
Thank you so much for the helpful review! Your little bits of instruction/explanation were great from my perspective! I am new to vinyl and strongly considering this set up. I don't need anything fancy and was looking for mid range quality and price. I was wondering if you know if it would be possible to attach a bluetooth transmitter to the turntable to use with wireless speakers as well? If so, is there a bluetooth transmitter you would recommend? Is the lack of anti-skate a big enough problem that I should not purchase it? It checks all of my other boxes, but I wasn't sure if this should be a deal breaker... thanks again!
Can this connect to your receiver? It would actually be very cool to be able to take advantage of the modern features on a vintage receiver and have it look nice, too! Seemless integration and future-proofing of existing and vintage equipment is always a plus!
I'm waiting for Crosley or someone else to make a real mid century modern radiogram in the vein of the one my folks had in the 60's and 70's. A stand alone piece of furniture it would be really cool.
Agreed. Ditto a Seventies-style 'music centre' with side-by-side turntable and cassette / 8-track deck. I'm guessing it's mainly because the vintage systems were so well-made, are generally simple to repair if needed, and still reasonably plentiful and reasonably priced (here in the UK you can still barely give them away, though that's beginning to change), that most people who are in the market for one prefer to go with a used original system than buy new. Ok, so you don't get Bluetooth, but that's easily rectified if you have an AUX IN (or the ability to add one by tapping into the amplifier stage). One of the things I love most about those old systems is the lovely deep, warm tone they all seem to have. Even the transistorised ones. Would they be able to reproduce that with modern electronics? And if they could, would buyers go for it? (I also love the comfortable, couch-on-wheels floaty feeling of Seventies and Eighties cars, but the fact that BMW and Audi are now so popular and 'luxury' is defined as a sporty, firm ride rather than a relaxing one suggests I'm in the minority).
it takes some talent but this guy made his own out of an old one and it turned out very nice: oldhousecrazy.com/2013/01/06/restore-an-old-stereo-console-diy/
I was actually pretty wowed by what they're offering here (replaceable magnetic cart, 2-way speakers, aluminum/steel platter, adjustable counterweight) , but unfortunately that tonearm has a bit of a mind of its own, which is a bit of a letdown. I'm not really a fan of how it looks, but the materials they chose are quite cool.
Hello to Record -Ology its funny I have set up on my DVD player which has a wifi hookup and I can get UTube on my telivision and I have you and VWESTLIFE set up I find watching your videos relaxing also after a hectic day at work but I just turned you on and I saw this vid I like it very much I think it is a winner and It sounds great the very minor complaint and very minor is the dust cover I would like if it had the front cover complete ,open in front looks odd I think it would look cool if the front of cover was complete cause it would give that mysterious look and I believe less dust to find its way in but another winner for me thanks again JRo
That would be down to Audio-Technica since they manufacture the AT3600L, and while there are standard groove versions of said cartridge, those are mostly unofficial from chinese companies. If AT makes a replacement stylus for said cartridge, others would follow. However, there's already a standard groove replacement stylus for their VM-95 cartridge series, though.
Looks to be a sound turntable...Great review...Interesting comment below about the tonearm....Would be good getting that straightened out....I have never really listened to anything by Lady Ga Ga...Saw a sheep the other day..going Ba Ba....Nearly as good as Lady Ga Ga ?? You`d have to be Ga Ga to not like Herb Alpert......Sounds of Joy....Very nice show !!
This is a cool unit! Not gonna lie that "ahhhh" wasn't too bad lol. Are you noticing any decrease in sound quality on the Lady Gaga record? I think the grooves of two of the songs are a bit grey.
I had a suitcase one by Crosley but sold it and all the records I had because I kept hearing Audiophiles say how horrible it was even though I thought it sounded fine, but was so embarrassed to own one because of them that I gave up on records because I am on a budget and cannot afford 1000 dollar equipment, I am more into CD's anyways but might one day get an all in one and try records again, wish I would have seen your videos before I sold my cruiser and records. You say audiophiles worry about the sound quality turning people off for records I worry audiophiles do that even though most of what they claim to hear is all in their heads science has proven that and it is why I stick with a decent Sony boombox and it sounds perfect to me.
And the audiophiles’ claims that the briefcase style units destroy records are also completely false. If anything, the Crosley isn’t turning people away from vinyl, in fact, it’s the reason why records are available everywhere in all the stores. It’s really the audiophiles that are turning people away from the hobby, even if they’re not trying to do that. In fact, within the past months, they’ve changed the internals of the cruiser model, implementing better speakers. Back in the day, they might’ve had bad sound, but now they’re actually okay.
I was hoping it was a Led Zeppelin record player. Although if it was anything like the Zep Album CODA it would just be made of leftovers. LOL It's my understanding they have a Beatles record player. I don't know if i missed it or if it is something new coming up.
Got one for a Christmas present but that arm is just fighting me all the time follwed your instructions to a tee too. Iwill be returning it for another one. hopefully i wont have this issue bummed out
ok i bought one(Just got it today as i writing this) a couple of notes. build quality seem ok not so plastics, as so much of the other china crap out there. I like the design, look like something taken right out of the seventies. turn table run a little to fast. need to be adjusted down. sound quality, it does not sound bad, you can hear that the sound is clean, but the big problem is no bass what so ever. best way to describe it, is like you have a 3 ways speaker there is missing the bass unit. I will buy some other speakers, but I am little scare here, if a new set speakers will blow the amplifier. but I have to take that chance, I can't live with that tiny sound. turntable motor is a little noisy. its ok I don't hear it when the music plays. the arm also have the same problems as showing in the video, but not to the same degree. i will update with info about using other speakers and if i find other things that good and bad.
Update 18-09-2021 : I have change the speaker to a pair of Technics SB-HD550 (That i got dirt cheap and in mint condition) they sound a lot better but can't play as high, but i can't play to high where i live anyway so i will survived. i will update my post if the amplifier blow...
My guess on the wattage would be somewhere between 5 and 7 based on my experiences with other systems. I love the lid, but I don't like thst it's got snow open front. Dust!!!
The springiness of the tonearm is because the microswitches which turn the motor on when you move the tonearm away from the rest and then off when it reaches the end of the record are too stiff, and are fighting against the movement of the tonearm. You should alert Crosley to this problem, so hopefully they can fix it in future production runs by substituting switches that aren't as stiff.
Interesting.....
@@Recordology
Yes, regardless of whether or not it has anti-skate, the arm should never be fighting you like that when it’s resting on the cue lift. That will definitely cause a lot excessive uneven groove wear.
I have a 1974 “Dual” 1226 idler-drive turntable, built in the Black Forest of Germany, this thing is my prized possession.
It still has its original super heavy brown tinted acrylic dust cover and original cartridge. I even have the Original Sears branded receiver that my Aunt and Uncle purchased with it.
In 46 years not one thing has gone wrong with it or the receiver, never had to go in for servicing of any kind - the sound is clean, clear and really crisp, with the volume literally on 1, music fills the house. They just don’t make them like that anymore.
what brand is the receiver?
I started out with a dual 1019 in fall of 2017 that I restored and later that same fall picked up an onkyo tx860 bundled with infinity tower speakers all free btw. I kinda miss that table and that setup but I now have a 1984 realistic linear tracking table that I restored summer of 2019 and klipsch speakers, sony sub, klh center all connected to a yamaha 5.1 receiver from about 2014 and a sony bravia 40inch television.
This is the finest quality Crosley device I have ever seen. A few minor tweeks and it would be darn near perfect.
I just purchased this after watching this review. I couldn’t get the platter drive motor to engage. And the power knob was clearly damaged and wasn’t as nice and crisp as the tuner knob when pressed in. It was mushy feeling. So I returned it, clearly just a bad unit. Second one came super stoked to finally listen to my records. Once again I couldn’t for the life of me get the platter motor to engage when pressing the phono button. I’ve come to the realization that I must be the problem and have given up on my dreams of being a vinyl connoisseur. Thanks though for the great and informative video🤙🏻
I'm sorry to hear that! Was the belt on right?
Nice system. I was raised on Herb Alpert and the Tijuana Brass. My father still has all of his albums from the 60’s. I still have my Kenwood direct drive turntable I bought back in 1985. Great Review.
Glad to see that the platter is finally the size of the record album. They actually didn’t skimp on material to make it bigger. Looks good and more professional. Nice build with the sides and the lid
The pitch control is a necessity for serious 78 collectors, as many pre 1925 records were recorded at various speeds.
When it comes to more "entry level" and all-in-one turntables, Crosley has made some serious improvements. I now expect any Crosley product you review to be passable at the very least (well, most of the time)! I'd still go for the Audio Technica LP-60 if I were in the market for something easy to use and inexpensive, but I think Crosley would serve that market just as well.
That's a nice little unit and one of the better Crosley units I've seen besides their higher end re-badged tables. The one thing that would have been nice is spring clip connectors for the speakers instead of those jacks just in a person wanted to experiment with using different speakers.
Jerry Moss is the M of A & M records. I have a bunch of old Herb Alpert albums. My parents had the Going Places album as long as I could remember. I started collecting more of them in my 20s. Thank you for sharing.
Hey man thanks for checking it out! I requested this one a while ago and didnt see that you covered it lol
Hope you enjoyed it!
A very good record player from Crosley, I'm well impressed. I like the look of it and it's great to see they've finally built a system with a full album size platter. The tonearm seemed a little springy, but apart from that tiny little issue this is a pretty darn good player. Well done to Crosley.
Gosh, I've always been very negative about Crosley (with good reason frankly), but this looks very decent indeed - I'm impressed; so well done to them!
FINALLY A REVIEW OF A CODA SYSTEM YES
I can’t think of another player that has a dust cover that’s open at the front!
It’s not surprising that you had to slow down the speed. It’s typical for these (for lack of a better term) all in ones to rotate slightly fast. At least with this one they let you adjust the pitch.
Now I’m going to watch Techmoan play a chocolate record (though I doubt he’s using one of these)........
That was an interesting video.....I had thought of making one of those!
I'm tryin' real hard to not like this unit. But it's resisting all my efforts. It's... actually pretty darned good. Two way speakers, decent power output, decent(ish) tone arm, 3 speeds, FM, Bluetooth, aux-in, line-out, headphone jack.... The only other things I could think of to add to it are a tone control of some kind and a proper anti-skate..... but strictly speaking, I don't think they're necessary (a lot of equipment lacks any sort of tone control today, and anti-skate is actually more of a last-nth-degree setting anyway; most record players live happily without it).
Better bass could be achieved with larger speakers, but in this price range what you get with this is completely normal and adequate.
I'm not gonna BS anyone. It's not a 'high end' unit... but then, it's not supposed to be. If you want high-end, you're gonna have to open your wallet a lot wider, simple as that. But it IS a lot of bang for the buck. I see this as a go-to for someone who's decided to migrate up from a Cruiser or Dansette but isn't ready to go full-bore into a component system.
Someone at Crosley is payin' attention. You could do a lot worse than this. A *LOT* worse.
Interesting little unit there and might suit a youngster or for a room with limited space. The tonearm does seem a bit wayward and reluctant to stop the platter when returned to the rest. But, seems a lot better bet than the suitcase items.
I like it, looks good but I don't like the fact that the tone arm is trying to move on you and that the pitch control isn't correct at zero. But it looks to be a nice system, Crosley have gotten better at making tables over the last couple of years.
Unusial for a Crosley, am impressed but when are we going to get a auto changer?
Sometimes I wish to see the return of the Crosley Stack-O-Matic, which was the last auto changer ever made, discontinued around 2010
Hello! Just started watching your videos, which I love. I’m interested in knowing what type of device you would actually recommend for a beginner wanting a system. Not knowing where to start/begin.
Welcome to the fun hobby of records! Here is a good place to start;ruclips.net/video/RoTAaZs3tW8/видео.html AND THIS ruclips.net/video/kmzvSI2IfOI/видео.html AND EVEN THIS ruclips.net/video/FJPpNDQspts/видео.html we have covered so many aspects of playing records and adjusting record players on our older videos...you might find something interesting to watch on our playlists too!
I love Herb Albert's music!! Great machine!!
Thank you so much for the helpful review! Your little bits of instruction/explanation were great from my perspective! I am new to vinyl and strongly considering this set up. I don't need anything fancy and was looking for mid range quality and price. I was wondering if you know if it would be possible to attach a bluetooth transmitter to the turntable to use with wireless speakers as well? If so, is there a bluetooth transmitter you would recommend? Is the lack of anti-skate a big enough problem that I should not purchase it? It checks all of my other boxes, but I wasn't sure if this should be a deal breaker... thanks again!
Don't worry about the anti skate.......im sorry but I haven't tried any bt transmitters yet....thank you for the nice comment!
beautiful looking unit, love the design and style of this. the sound quality wasn't all that bade either, thanks for this review, take care
Thanks for watching!
I am quite impressed. I would attempt to change the speakers though. Once again great for someone starting up with records.
I see that Crosley is taking criticism and putting better components in their units.
It’s a very, very nice turntable! That little flaw is a little annoying, but other than that, it’s a really cool unit!
Can this connect to your receiver?
It would actually be very cool to be able to take advantage of the modern features on a vintage receiver and have it look nice, too!
Seemless integration and future-proofing of existing and vintage equipment is always a plus!
I wish it had tone/balance jobs, and the aux input should be in the back
Cool turntable. By the way, that scene from "It's A Wonderful Life" makes me cringe every time lol
Awesome review, was curious about it. Nice!
Glad it was helpful!
Herb alpert is one of my all time favorites never gets old
Nice record player just missing one thing anti-skating adjustment would be required if upgrading the cartridge
I saw this on Amazon yesterday, and wondered if you would feature this.
Were you able calibrate the pitch control after all? Also how does this compare to crosley switch ii in your opinion?
I like the head shell it's not that ugly offset one.
I'm waiting for Crosley or someone else to make a real mid century modern radiogram in the vein of the one my folks had in the 60's and 70's. A stand alone piece of furniture it would be really cool.
Agreed. Ditto a Seventies-style 'music centre' with side-by-side turntable and cassette / 8-track deck. I'm guessing it's mainly because the vintage systems were so well-made, are generally simple to repair if needed, and still reasonably plentiful and reasonably priced (here in the UK you can still barely give them away, though that's beginning to change), that most people who are in the market for one prefer to go with a used original system than buy new.
Ok, so you don't get Bluetooth, but that's easily rectified if you have an AUX IN (or the ability to add one by tapping into the amplifier stage).
One of the things I love most about those old systems is the lovely deep, warm tone they all seem to have. Even the transistorised ones. Would they be able to reproduce that with modern electronics? And if they could, would buyers go for it? (I also love the comfortable, couch-on-wheels floaty feeling of Seventies and Eighties cars, but the fact that BMW and Audi are now so popular and 'luxury' is defined as a sporty, firm ride rather than a relaxing one suggests I'm in the minority).
it takes some talent but this guy made his own out of an old one and it turned out very nice: oldhousecrazy.com/2013/01/06/restore-an-old-stereo-console-diy/
Subbed to the channel just bought a victrola and now I’m already eyeing this
I was actually pretty wowed by what they're offering here (replaceable magnetic cart, 2-way speakers, aluminum/steel platter, adjustable counterweight) , but unfortunately that tonearm has a bit of a mind of its own, which is a bit of a letdown. I'm not really a fan of how it looks, but the materials they chose are quite cool.
Hello to Record -Ology its funny I have set up on my DVD player which has a wifi hookup and I can get UTube on my telivision and I have you and VWESTLIFE set up I find watching your videos relaxing also after a hectic day at work but I just turned you on and I saw this vid I like it very much I think it is a winner and It sounds great the very minor complaint and very minor is the dust cover I would like if it had the front cover complete ,open in front looks odd I think it would look cool if the front of cover was complete cause it would give that mysterious look and I believe less dust to find its way in but another winner for me thanks again JRo
Yes, I have Herb Alpert and the Tijuana Brass records, the greatest hits and Whipped Cream and other Delights.
they have stepped it up, i truly believe it rivals the lp60x
The gold anodized control panel with the black knobs reminds me of Marshall guitar amplifiers.
Coolest Crosley ever.
I love the pitch control.
Good unit,but could have had at least a tone control.
Crosley 1970 T has them.
I still don't know why, on a lot of these newer units, they don't give you an extra 78 stylus if the table has 78 speed? I couldn't cost that much?
That would be down to Audio-Technica since they manufacture the AT3600L, and while there are standard groove versions of said cartridge, those are mostly unofficial from chinese companies. If AT makes a replacement stylus for said cartridge, others would follow. However, there's already a standard groove replacement stylus for their VM-95 cartridge series, though.
Looks good! Thought it might be let down by the speakers...
Looks to be a sound turntable...Great review...Interesting comment below about the tonearm....Would be good getting that straightened out....I have never really listened to anything by Lady Ga Ga...Saw a sheep the other day..going Ba Ba....Nearly as good as Lady Ga Ga ?? You`d have to be Ga Ga to not like Herb Alpert......Sounds of Joy....Very nice show !!
Someone take this design and upgrade all the insides etc to give it the sound it deserves
This is a great record player
I have a victrola suitcase player that needs a new belt do you know what belt i need anyways love your videos thanks
Thank you....I would start with their site....
@@Recordology i looked but couldnt find anything on the site
This is a cool unit! Not gonna lie that "ahhhh" wasn't too bad lol. Are you noticing any decrease in sound quality on the Lady Gaga record? I think the grooves of two of the songs are a bit grey.
Not yet!
@@Recordology That's good!
I had a suitcase one by Crosley but sold it and all the records I had because I kept hearing Audiophiles say how horrible it was even though I thought it sounded fine, but was so embarrassed to own one because of them that I gave up on records because I am on a budget and cannot afford 1000 dollar equipment, I am more into CD's anyways but might one day get an all in one and try records again, wish I would have seen your videos before I sold my cruiser and records. You say audiophiles worry about the sound quality turning people off for records I worry audiophiles do that even though most of what they claim to hear is all in their heads science has proven that and it is why I stick with a decent Sony boombox and it sounds perfect to me.
And the audiophiles’ claims that the briefcase style units destroy records are also completely false. If anything, the Crosley isn’t turning people away from vinyl, in fact, it’s the reason why records are available everywhere in all the stores. It’s really the audiophiles that are turning people away from the hobby, even if they’re not trying to do that. In fact, within the past months, they’ve changed the internals of the cruiser model, implementing better speakers. Back in the day, they might’ve had bad sound, but now they’re actually okay.
I was hoping it was a Led Zeppelin record player. Although if it was anything like the Zep Album CODA it would just be made of leftovers. LOL It's my understanding they have a Beatles record player. I don't know if i missed it or if it is something new coming up.
Herb Alpert stuff is good I prefer his late 70s and early 80s recordings more than his late 60s and early 70s tho
Why is it so difficult for modern turntables to be semi-automatic?
I recognized the radio stations. You must be in the mile high city. Great review!
Yes I am!
4:46 what a perfect vibrato!
The bass doesn’t hit very hard because that cartridge requires 3,5g to track correctly. Magic number for the at3600l is 3,5😀
In this case it has more to do with the speakers.
@@Recordology I was thinking of buying this, are the speakers bad or? What do you mean?
Nice turntable.im still waiting to take delivery of a c100 a friend has for me.....getting bored waiting lol
Enjoy it
A great Herb Alpert song is Route 101.
Got one for a Christmas present but that arm is just fighting me all the time follwed your instructions to a tee too. Iwill be returning it for another one. hopefully i wont have this issue bummed out
Thank u for your video. I couldn’t find the belt.
Is it possible to plug in a subwoofer additional to the speakers?
Good question. It would be interesting to try.
Very cool looking player, looks 60s
ok i bought one(Just got it today as i writing this)
a couple of notes.
build quality seem ok not so plastics, as so much of the other china crap out there.
I like the design, look like something taken right out of the seventies.
turn table run a little to fast. need to be adjusted down.
sound quality, it does not sound bad, you can hear that the sound is clean, but the big problem is no bass what so ever. best way to describe it, is like you have a 3 ways speaker there is missing the bass unit.
I will buy some other speakers, but I am little scare here, if a new set speakers will blow the amplifier. but I have to take that chance, I can't live with that tiny sound.
turntable motor is a little noisy. its ok I don't hear it when the music plays.
the arm also have the same problems as showing in the video, but not to the same degree.
i will update with info about using other speakers and if i find other things that good and bad.
Update 18-09-2021 : I have change the speaker to a pair of Technics SB-HD550 (That i got dirt cheap and in mint condition)
they sound a lot better but can't play as high, but i can't play to high where i live anyway so i will survived.
i will update my post if the amplifier blow...
This is a good unit, i like it!
Thank you for the tutorial, perfect 👌
You're welcome 😊
Great job. Love Herb Alpert.
The updated version has been updated to 40 watt speakers.
Awesome!
I love Herb Alpert!
It's that a Walmart CD player at 18:02?
That is the HOTT CD player.... ruclips.net/video/XsRzQOi5Irg/видео.html
I have to rate this one mediocre, which is fairly decent for a crosley. Those tonearm issues don't seem good though.
For a minute it looked as though it had an 8track player!
The speakers of Crosley Aria has an edge over the speakers of the Crosley Coda.
Agreed!
My guess on the wattage would be somewhere between 5 and 7 based on my experiences with other systems. I love the lid, but I don't like thst it's got snow open front. Dust!!!
This record player is good
Great job!
Thanks!
No Patsy Cline for us? 😆 It's all good sir. I can't make fun of you, I listen to Genesis.
The speed is too high. Check with freedom song
Open-front dust cover: hmm......
I don't like that design either. Dust can still get in, and a child could reach in from the front and possibly damage the stylus.
Terrible Sound 😔