No need to cut plastic just pour hot water simple enough and use it for next DIY but I must say that your idea for sink is just amazing I'm using this method for making planters...
Would suggest a rubber mallet to tap the forms and remove bubbles. Can also fill and smooth with concrete patch and sand paper. Angle grinder with buffer attachment if you want a smooth look. Otherwise great work. Also spray inside of your mold with silicon or similar for more. Convenient removal.
@@beaurenov I wasn't claiming to be an expert. I was offering some advice based on my own experience and also good tips I've seen on other RUclips videos. Also I've never made a sink from concrete which was a big reason I watched. Now go back and sit in your box.
@@beaurenov Thank you for your compliment. My comments were mainly about strengthening, finishing and removal from mold. No matter what shaped object you're making, those are decent general tips. If the video uploaded learned any tips from that then my comment was completely validated. If not, he probably knows plenty and just did it how he liked. Which is all fine.
@@dobitasavaje9097 Hola, por favor me puedes decir que le pusiste en el centro?? Imagino que que esa barra de metal es para que no se desplace y deforme, gracias anticipadas, un saludo desde España
good educational vid teaching relevant techniques to various ideas or projects. thank you. show cases what products can be found , colors etc. form work thickness method very useful for me being new to the task at hand.
Если брать в соотношении: - цемент - 1000 гр; - песок - 1500 гр; - вода - 600 мл; - краситель - 100-150 гр; - фибра - жменька (на глаз) ;) ОЧЕНЬ важно не переборщить, а то изделие превратится в мочалку волосатую))
This was incredible to watch! I love how dark the black sink is. Did you buy the black concrete pre-made, or did you color regular concrete black yourself?
I tried to make it. But my concrete doesn't seem to "rise" up to the edge of the water basin. It keeps laying on the bottom of the water basin. Any idea what I did wrong? Maybe didn't use enough viber?
What about water resistance, if I use it in the kitchen will it absorb dirt and bacterias from dishes?? Whatever is really incredible project. I would like to make a double sink... Any idea how?
En Kiev ) El pigmento "Kollo" para mezclas de hormigón y construcción se vende en Ucrania (pero se produce en China). No es una pintura líquida, es solo un pigmento seco: el blanco es dióxido de titanio, el negro es oxido de hierro (no estoy seguro como es en español "железоокисный"/"iron oxide") resistente a la luz.
Hello! This is not a solution, but crushed stone, I put it there in order to add a little weight, and the concrete did not push out the upper basin and did not violate the future geometry of our washbasin
Мне понравилось, спасибо. Подумываю заморачиваться в новую квартиру на замену стандартным умывальникам. Ещё я видел что можно и столешницу из бетона делать. Вот только опыта в этом деле полный ноль ☹️
Use hot water to release mold so you can reuse next time, great looking sinks.
this is the correct way. it will loosen the plastic mold, no need to destroy the plastic.
@@GiBe2011 good to know
ruclips.net/channel/UCKxrlTXMZAWDd6acJHcvhdw
Yep, also a quick coat of release agent before pouring.
use grease to demold the inner bowl.
You can use oil for molding.thanks for sharing
Or dish washing soap
the black is amazing
What were the 2 black treatments you put inside the black sink please? These are awesome. Thanks for sharing!
Fun project! You can shake the mold right after mix pouring with orbital sander (without sandpaper) for smoother result.
No need to cut plastic just pour hot water simple enough and use it for next DIY but I must say that your idea for sink is just amazing I'm using this method for making planters...
black beauty
Padrisimos! Porque usas fuego en el negro? Gracias
Would suggest a rubber mallet to tap the forms and remove bubbles. Can also fill and smooth with concrete patch and sand paper. Angle grinder with buffer attachment if you want a smooth look. Otherwise great work. Also spray inside of your mold with silicon or similar for more. Convenient removal.
If you're already an expert for this project, why are you watching this video?
@@beaurenov I wasn't claiming to be an expert. I was offering some advice based on my own experience and also good tips I've seen on other RUclips videos. Also I've never made a sink from concrete which was a big reason I watched. Now go back and sit in your box.
@@larmckenna You sure had a lot of advice, for someone who has never done it before.
@@beaurenov Thank you for your compliment. My comments were mainly about strengthening, finishing and removal from mold. No matter what shaped object you're making, those are decent general tips. If the video uploaded learned any tips from that then my comment was completely validated. If not, he probably knows plenty and just did it how he liked. Which is all fine.
Thank you, i was hoping to find a comment to fix this bubble issue.
Thanks! You gave me an idea for my nice home urinal project
Para desmoldar lo pones al revés, y viertes agua caliente, se desmolda casi solo. Para el molde de adentro igual. Lo hice y asi desmoldé. Saludos!
Gracias por el tip
Hola. Qué serían en español los productos que utiliza para este trabajo ??
@@ullybarnes6768 Pues yo usé cemento gris, arena de río y agua. La verdad no sé que usó el 🤭.
@@dobitasavaje9097 Hola, por favor me puedes decir que le pusiste en el centro?? Imagino que que esa barra de metal es para que no se desplace y deforme, gracias anticipadas, un saludo desde España
@@luzdelalbaalmarante2800 Le fijé un pedazo de tubo de PVC del grosor que debe ir el desagüe. Se lo fijé con cinta adhesiva.
How well does it drain? Looks like it would hold water
I really like concrete products 👍
good educational vid teaching relevant techniques to various ideas or projects. thank you. show cases what products can be found , colors etc. form work thickness method very useful for me being new to the task at hand.
Nice concept! Thanks!
Hi, does the varnish used wear over time?
Eu sou do Brasil ficou lindas ❤
What is that bar you put in the middle?
Beautiful, exactly what I'll be doing.
So beauty 🇧🇷
Beautiful!
Вітаю. Підкажіть будь ласка, в яких кількостях ви використовували всі ці матеріали?
Is there a special type of concrete you used? And what do you recommend for water repellent? Thanks.
Hermoso trabajo, un tip para que salgan bien los moldes es que les apliques una capa de jabón para lavar la loza, es súper efectivo !!👍👍
Qué es ese producto blanco que le aplica al final?. Gracias
I thank you, greatly appreciate it
Amazing video and creation....love it🥰
Hi what is the proportions (ratio ) of the material please
NICE!
Very nice
Also exept hot water you could also use vasseline! ;)
Really nice work though!
Hi Nice job :) what did you put as a layer over the concrete?
Hi!
If we take in the ratio:
- cement - 1000 gr;
- sand - 1500 gr;
- water - 600 ml;
- dye - 100-150 g;
- fiber
Si pones un aceite o desmoldante en los moldes puedes realizar varios sin romperlos.
Pensé lo mismo
Gracias por la pista, me di cuenta más tarde)
Quizás con desencifrante como los que se utiliza en la construcción
Beautiful work. Have you tried adding boiling water to remove the piece? Bye
Thank.) No, but later my subscribers told me that this is possible
Very nice.
Лайк за умелые руки.
👍👍👍👍 Заливал чистым цементом или с песком?
Если брать в соотношении:
- цемент - 1000 гр;
- песок - 1500 гр;
- вода - 600 мл;
- краситель - 100-150 гр;
- фибра - жменька (на глаз) ;) ОЧЕНЬ важно не переборщить, а то изделие превратится в мочалку волосатую))
@@SVdesign Спасибо за ответ. Успехов.
u can use any old oil to grease the plastic containers so they can come out easily and again can be reused.
nao precisa desfazer da forma.... basta colocar agua quente... que ela sai facil
Fill the holes and fine-sanding with 2000 grit sandpaper and water?
Yes, just make a solution of cement with water and color without sand
Use a spray on release agent.
Bastava passar sabão líquido dr lavar louça em toda a bacia. Q ia soltar rápido e não ia estragar as formas. E dava pra usar depois
X que no le pones detergente asi no lo rompes
Привіт, скліьки фібри ви використовуєте? 1:1 чи 1:0,5 чи можливо якийсь інший варіант?
Привіт, честно?) Жменька на 10л відро, один раз зробив багато фібри, вийшов не умывальник, а якась лохмата губка)) багато не давай
materials list please
Very cool
How to make gloss ?
This was incredible to watch! I love how dark the black sink is. Did you buy the black concrete pre-made, or did you color regular concrete black yourself?
Myself 😉
@@SVdesign how did you color it?
@@SVdesign how did you color it ..thanks
It is special pigment for concrete)
Apply oil before casting and use hot water to release pharma.Dont waste plastic by cutting it.
کان مفروض تستخدم سائل تنظیف لسهوله اخراج البلاستک بدل قطعه
WOW 👏 !!!!
EXCELLENT JOB !!!!
THUMBS 👍UP
MY FIRST TIME WITH YOU
I DID SUBSCRIBE
CAN'T WAIT UNTIL NEXT TIME
THANKS 😊
CLO 💚
My like first one;)
Muito bom, mas você deveria colocar papel filme nas bacias e passar óleo nele, na parte de dentro, para não agarrar.
Amigo para desmoldar los envases plasticos usa agua caliente y se despegan facil de resto entretenido
А разделителем нельзя было смазать тазики? А то проект моментально стал очень дорогой ))
Нафиг разделитель! А то с ним тазики целы остались бы!
Нафиг вибрацию, а то раковин в бетоне не было бы!
😂😂😂
I tried to make it. But my concrete doesn't seem to "rise" up to the edge of the water basin. It keeps laying on the bottom of the water basin.
Any idea what I did wrong? Maybe didn't use enough viber?
you just need to pour it to the thickness of the bottom, put a second bowl, and then gently finish off the solution along the edges, and then vibrate
Could be temp
What about water resistance, if I use it in the kitchen will it absorb dirt and bacterias from dishes?? Whatever is really incredible project. I would like to make a double sink... Any idea how?
Dónde compro esa pintura líquida para concreto?
En Kiev )
El pigmento "Kollo" para mezclas de hormigón y construcción se vende en Ucrania (pero se produce en China).
No es una pintura líquida, es solo un pigmento seco: el blanco es dióxido de titanio, el negro es oxido de hierro (no estoy seguro como es en español "железоокисный"/"iron oxide") resistente a la luz.
English просто СУПЕР ))))
So so 😄
Ребята, класс. Если вы будете смазывать формы любым маслом или жидкостью для мытья посуды, то после затвердевания формы будут просто сниматься.
Спасибо )
Теперь у тебя есть бетонный тазик .
💪
Se tivesse passado óleo as vasilhas sairiam inteiras
Black color name please send me
hey can you write down the details of each step please? I don't understand why you put the mortar inside the smaller bucket?
Hello! This is not a solution, but crushed stone, I put it there in order to add a little weight, and the concrete did not push out the upper basin and did not violate the future geometry of our washbasin
OMD incredible I’m in the uk any chance of sending me the names of all I need in English please 🙏🏻🙏🏻🙏🏻
Hi!
If we take in the ratio:
- cement - 1000 gr;
- sand - 1500 gr;
- water - 600 ml;
- dye - 100-150 g;
- fiber
You are tired of breaking the plastic you could pour boiling water on them
جميل
I completely agree with you, I later realized that this is possible) You could also smear the plastic with vazilin
Soap or oil.
😍😍😍😍😍😍😍😍😍😍😘✅
👍🏻👌👍🏻
Obrigado por deixar a legenda
Coloque água quente ,que sai rápido podendo aproveitar as formas varias vesses,
Kaplari sitrec laylonla kapla derim yapismaz
Meu Deus ele quebrou todas as formas. Bastava passar óleo de cozinha emntodas elas. Que isoltar fácil.
grease the plastics in soybean oil or margarine, it will make the job easier
Just add hot Water to keep out the mold.
I have already solved the problem. You just need to grease the form with vasiline liquid)))
Que dó vê quebrando os moldes. Era só ter aplicado um óleo ou vaselina no molde e contra molde que sairia fácil. Fica a dica
you must use wax to release it. or pork grease.....
Мне понравилось, спасибо. Подумываю заморачиваться в новую квартиру на замену стандартным умывальникам. Ещё я видел что можно и столешницу из бетона делать. Вот только опыта в этом деле полный ноль ☹️
Дорога появляется, под ногами идущего 😉 пробуй и появится опыт)
Nice job man!
What kind of colours do you use?
Thank you! White cement and black color for mortar
👍👍👍👍
Hello, I like your idea and would like to make it. Please give me a list of the mixture that was used
Hi!
If we take in the ratio:
- cement - 1000 gr;
- sand - 1500 gr;
- water - 600 ml;
- dye - 100-150 g;
- fiber
Boiling water would have made your inner bowl come out easy. Then poor boiling water over the bottom bowl and it would have popped off.
I realized it later)
el desmoldante es lo que faltó
ارجو أن تضيف بعض التفاصيل بالكتابة على مقاطع الفيديو خاصتك
use hot water next time for removing the dishes
U SHLD HAVE JUST POURED HOT WATER ON THE PLASTIC TO SMOOTHLY REMOVE IT FROM THE CONCRETE INSTEAD OF BREAKING IT ANYWAY GOOD JOB DONE
No need to cut that mold. Put hot water n remove it. Very easy.
Todo bien, pero deberías sacar los moldes sin romperlos. De hacer para vender sería un gasto. Mejor reciclar, reutilizar los mismos.
Ya me di cuenta que con la ayuda de aceite o vaselina, no puedes romperlos)
i will also try spray and cook non stick and see what happens. comments below are usefull, oil , hot water etc
I meant the name of the materials and amount that was used
Hi!
If we take in the ratio:
- cement - 1000 gr;
- sand - 1500 gr;
- water - 600 ml;
- dye - 100-150 g;
- fiber
le savon isol entre le plastique .
5$ cost???
Yes
You didn't vibrate the cement, thats why it looks so bad
Perdeu as bacias a toa, só jogar agua quente que solta na hora.
❤💙👍
Смазки не хватает
А смазал бы маслом то тазики бы не поломал
Согласен 🙃
Woodglut comes with very useful plans with all the details you need.
Dude, turn the gain down on your audio.
Cement sinks don't have glaze, tough to clean, dirty mold in no time probably
Debió engrasar primero y después Con agua caliente sale rápido..