Install and Setup CSR1000v 17.x to EVE-NG from an ISO | SD-WAN cEdges
HTML-код
- Опубликовано: 18 окт 2020
- The latest code of CSR1000v can do a WHOLE lot now that it integrates with the SD-WAN environments. Here's how YOU can deploy a CSR1000v on the latest code with an ISO file!
===========================================================
Install command:
/opt/qemu-2.2.0/bin/qemu-system-x86_64 -nographic -drive file=virtioa.qcow2,if=virtio,bus=0,unit=0,cache=none -machine type=pc-1.0,accel=kvm -serial mon:stdio -nographic -nodefconfig -nodefaults -rtc base=utc -cdrom [CSRIMAGE.ISO HERE] -boot order=dc -m 3072
==========================================================
➡️Visit DataKnox: knoxhutchinson.com
➡️Need training? Check CBT Nuggets: learn.gg/dataknox
Training!
CBT Nuggets: learn.gg/dataknox
ENCOR: learn.gg/encor-knox
ENAUTO: learn.gg/enauto2
PowerShell 7: learn.gg/ps7-dataknox
*Below you will find what are known as affiliate links. Basically, links to really great stuff I use that, if you buy, I will receive a super small kickback that helps support this channel. Thanks!!*
(BOOKS, GEAR, and STUFF I USE)
Amazon Affiliate Store: amazon.com/shop/dataknox
Boson ENCOR Exams: bit.ly/3dRXDKr
Boson ENARSI: bit.ly/2Yvh0DS
Dell R720 2U server: ebay.to/2MUZZMP
Cisco 3750G Switch: ebay.to/2YsGuQQ
Cisco 3650 IOS-XE Switch: ebay.to/3fnVRkt
Cisco 3850 IOS-XE Switch: ebay.to/2XZ0ko2
Cisco ISR 1113 IOS-XE Router: ebay.to/2zNztSA
----------------------------------------------------------------------------------------------------------------
🤝🤝🤝JOIN THE Cisco Routing and Switching FACEBOOK STUDY GROUP: bit.ly/2A3vah0
🤝🤝🤝JOIN THE CCNA/CCNP Collaboration FACEBOOK STUDY GROUP: bit.ly/2FEE9aH
----------------------------------------------------------------------------------------------------------------
mcsa vcp mcse mta tshoot 300-135 az-900 az 900 az900 Microsoft Azure Devnet Associate
Cisco Devnet Associate
CCNP Enterprise
CCNP Security
CCNP Data Center
CCNP Service Provider
CCNP Collaboration
Cisco Certified Devnet Professional
Cisco Certified Network Professional
CompTIA Linux+
Linux+
Ethical Hacking
Hacking
#CBTNTrainer #ccna #eveng 
Игры
you just keep on giving great material! AWESOME!!!
Thank you 🙏😊
Another great tutorial, thanks man
Thank you 🙏
For those who got 'custom memory allocation vtable not supported' ;
Set Processors “Number of processors” and “Number ofcores per processor”. Set Virtualize Intel
VT-x/EPT or AMD-V/RVI to ON (checked)
and set Virtualize IOMMU (checked)
The .iso file isn't under the SD-WAN section. You have to navigate to the Downloads - Routers - Virtual Routers - Cloud Services Router 1000V Series.
thanks!! I spent like 30 minutes looking for the ISO and I could not find it!!
Dude you have no idea how much you rock for that little Gem! No idea!!!
Link, please
Thank you.
I was able to just simply install the serial qcow image no problem with the console working.
GREAT!
Followed through but I can't seem to get (qemi) to come up to type "quit" after holding cntr+a & c after highlighting the Console option
Well, I found what I am going to spend Sat night doing.
custom memory allocation vtable not supported
After following this does anyone see any issues having the image boot into controller mode?
I have download the latest qcow2 image and it booted fine in eve ng. I also have it connected in vManage, so why do we need the iso? Keep up the great work much appreciated.
So, iISO is not needed?
Hi sir, how can i get a wan list. this part is missing?
Are there any actual EVE-Ng labs focused on CCNP ????
Thank you, could you please go over how to add csr1k to vmanage? Specifically how to do it with the manual certification issues
That is covered in our ENSDWI course on CBT Nuggets
@@DataKnox Ahh thank you! Last time I checked there wasn't one. Ill log in now and have a look!.
thank you
It would be covered in the Build an SDWAN lab content 😊
Hi Sir,
Your tutorial is amazing..can you share the cloud image.
Thanks
after selecting serial console and press enter, it keeps installing till reboot again and then stopped
this is last message "%IOSXEBOOT-4-FACTORY_RESET: (local/local): This was not selected via cli. Rebooting like normal"
any clue?
any update on this?
followed through your very easy to grasp tutorial. Thanks. However my CSR1000v boots for 2 seconds and then goes back to stop. any ideas ?
Sounds like you may have an issue with your CPU, VM, and enabling nested virtualization
Me too have this issue
@@kaiye3859 I found the fix. just make sure you choose the right qemu version in the config. for me 2.40 boots fine.
That was it. (by default it suggests a higher version which is not installed) good luck
Hi, I've been trying to install CSRV1000 but it doesn't works for me...
I have other Cisco Virl Images installed and works fine. I can connect via web browser to the devices and configure them.
With CSRV1000 i follow the same process to upload virls qcow2 images , I've tryed to with differents CSRV1000 isos (I get a qcow file and renamed to virtioa.qcow2) and when y Start node in eve i stops in 2 seconds, If doesn't stops i can't connect.
Any idea? I'd be the happiest person in the world if we could solve it
Thankyou!!!!!
Hey there, two years later I'm running into the same ussue ! Is it possible for you to tell me if you've solved it and how ? Thanks in advance
Gotta up the ram. It wont even bother if you got anything less than 32 if i remember and of course your hardware virtualization needs to be on but it prob is if ur other images are working. @@elmajdouliabdelhakim6900
Knox I saw a comment on the ccie ei posts from Cisco that the cedge is not going to be in the exam and there removing due to issues. Just FYI.
I've seen the same thing!
@@DataKnox Saves us sometime for studying :)
Does a CML license not allow me to download these images? Says I need a service contract.
CML does not come with v17
@@DataKnox Ah, okay. Is the CR1000v qcow2 image from CML not able to be imported into Eve?
I also want to say, thank you so much for all of your videos! You are a great teacher! I can tell you have a lot of passion for learning and that is great to see.
how about making the setup for ISE :) ?
I would love this
Ctrl C and then A did not work for me
I am not getting the QEMU Line where i can enter press. Ctrl + A and then followed by C all together right ?
LOL - HHHHAAAANNNSSEEELLL ...good reference
you show us the file in qcow2 format in the video, then tell us not to download that....to download the ISO version ? where is that
I made the same mistake. You have to look for the "cloud services router1000" under the Cisco product search box and you'll see the ISO under there. Its the last one. If you go to the csrv1000 sd-wan there is no iso. Hope that helps.
ctrl + a copy the whole screen