How to Install American Standard AXIS™ 36" Curved Shower Door
HTML-код
- Опубликовано: 7 сен 2024
- Hands-on installation of the Axis 36" curved shower door, as a companion to the installation instructions. This curved sliding door of clear glass and silver frame is designed for corner installation and fits the 36" curved Axis shower base and 3636CW Axis direct-to-stud wall set or tiled wall.
www.americansta...
Subscribe to our Channel:
www.bit.ly/Amer...
American Standard on Facebook: / americanstandardplumbing
American Standard on Twitter:
/ amstandard
American Standard on Instagram: / american_standard
American Standard on Pinterest: / amstandard
Find More Great Videos from American Standard: / americanstandard01
Check out our Luxury Bathroom Products at DXV by American Standard:
/ dxvluxury
Thank you!!!! We would not have been able to finish this nightmare project without this video. Some tips, though, slow down, and show close ups of pieces like the glass clips and how they actually fit.
Thank you. I added a stud in the wall for my shower. Those pladtic anchors wont hold worth a crap
This video is quite helpful, but you still need to read, and read, the included instructions. Also, just a tip for installing the gaskets (small one for the fixed panel and the two "regular ones"), use a soap and water spray bottle, spray the glass lightly and simply push the gaskets in place, makes for a much, much easier install. Like I said, good video, but you still need to read the instructions very carefully.
This was my very first shower enclosure that I have put together. It only took me 2 1/2 hours to put it together. Very happy with the enclosure and find it quite affordable AND a great looking product!!
However I believe the video was not helpful at all in the assembly. It lacked many key details and instructions are lacking info for top and bottom gaskets.
The label of “retainer blocks” on package, but “glass clips” are labeled in instructions. Part 1/step 5.
Thanks for the help on the “glass clips”= retainer blocks.
They make it look so easy. Best to get a professional to do it..
Maybe you just suck
I'm making a kind of camp and I want plenty of Axis showers!
Two and half days and it's sort of installed and I'm still not sure that it's anywhere like it's "supposed to be". The door opens and closes, so I guess that's good. I found the written instructions sufficiently vague. This video helps a little (still not enough detail). It would help if American Standard did a better job of labeling their parts.
People in the comment section actin like this is a master piece lego set... It's not that difficult to build. If you have any general idea of how a shower enclosure works, then you should have no problems. The only reason I was here to watch was because I want to see if I did it differently then what they expect... And because it was in my feed.
First step. Take one of the long screws to home depot. Replace it with 1 1/2 inch hex head sheet metal screws. Then throw away the screws that came with it. They are garbage. You are welcome.
Hi Lisa - Thanks for the feedback! We strive to supply quality products that deliver the expected performance. We'll take your concerns into consideration, but please note that using unspecified screws can void the product warranty.
Very frustrating install. Had to get REAL Phillips head screws, the ones provided stank and wouldn't go in without my driver skipping out, leaving the screw halfway in and a bitch to remove. The pre drilled holes for the glass clips were in the wrong place (did I miss something)? Had to drill my own holes for the glass clips to make it work. Be careful measuring for the door frame, I used the 1 1/8" measurements from the line and the wall was not centered on the base. Now I have 4 holes in my wall that I have to patch. Then, I aligned the wall to the base with the wall posts attached, drew a line, then using the holes in the wall posts, marked where the screws went and that worked.
After that, everything went together fine. If this item is ever re designed, why not have a tongue and groove device on the pan and the bottom of the door frame to help keep the water out so we don't depend ENTIRELY on the caulk. And if you are installing the frame into wood and not drywall, don't use the plastic screw anchors, it will hold much better.
i just got done tearing down bathroom walls and am rebuilding it, im putting studs on that point and instead of sheetrock im using 3/8 inch ply, i may swap out screws as well, thanks for tips
I finally got ours put together and it looks nice but I have tried 3 times now to stop the water from leaking under the seal at the bottom of the door enclosure with no luck
Did you ultimately fix this and if so how? Mine is leaking at that spot 2 years later and a lot of the the lowe silicon is moldy. Any ideas?
My rollers just are now floating in the air from the bottom of the door, I got no idea how to fix it, I'm scared the glass door is gonna brake 😢 , this is soooo stressful! Help please
Assembly took longer than it should have. The long screws used to assemble the frame and attach to the wall are junk. Use something else even if you have to go buy them. It will be worth it.
Hello Rob! We are sorry to hear about your installation difficulties. Please give our team a call at 800-442-1902 so we can get some more details and troubleshoot your issue. Thanks!
The instructions only work if you are using the companion wall panels. I did a tile wall and figured that the play between the frame and wall posts would accommodate. Wrong! Having to remount the wall posts by first assembling the frame without the glass and the wall post inserted in the frame posts and them marking the new locations far the wall posts. Hope it will work but the bottom rail will be at the outer edge of the base.
By class clip she means retaining blocks
before installing the base what should I do to stop the squeak? do I pull the Styrofoam out?
Which horizontal rail is which. One is longer than the other???
how do you install the fix glass? I did not see that step
They failed to show thew toughest part which is how to deal with the drain.
The printed directions lacking in important details and the video also lacked important details. After a lengthy call to tech support finally resolved several issues were taken care of. They say they are aware of the need to rewrite (in more detail) the directions. Hopefully soon!
When I try and put wall post against wall, the lip on the base stops post from being flush. Lip causes a gap
Let the bottom where you want it and calk it down, then move on to the next part.
Either this is an old model or you show a different model (probably the 38"). The 36" Curved Shower door that I bought does not meet the wall at 90 degrees as shown in the video. (2:46). And Seriously, using a channel lock to loosen and tighten the nuts, My 7th grade shop teacher is rolling over in his grave.
We are having trouble with this door and well we need figure out how to put the non sliding door on would someone help plz
Did you figure it out? Cause one of our bottom rollers will not stay in
@@robertogurrola7465 yea basically most of them won’t stay in I guess tha door isn’t well balanced
great job.
don't buy this product- its horrible to put together.
She just re-worded the instructions that came with the shower without added much to it
you missed a bunch of details
After watching this videos I’m gonna hire a professional..
Horrible detail angle shots. It's hard to follow this tutorial
Hi Emmanuel - Thanks for the feedback! You can always give us a call at 800-442-1902 and a member of our Consumer Connection team will be happy to provide installation assistance. Thanks!
The screws are trash
Good vid but this does not require two people necessarily, I’m a carpenter in Canada and I’ve installed many of these solo simply because I would rather not wait two hours or more for a coworker to come help lol
If you just bought these doors do yourself a favor and have a professional install them. If you've never installed these doors I'll let you know now that they are a absolute nightmare, I'm a carpenter and have been installing showers for 20 years and it still took me almost a half a day to install this flimsy ass setup. I'll never suggest this setup to anyone!!!
Hello Chris - We apologize for the inconvenience you are experiencing! Please give our team a call at 800-442-1902 so we can get some more details and troubleshoot your issue. Thanks!
I am trying to put curved Axis door It is terrible to put together. After watching this Video over and over I still don’t understand it. Terrible
omar
Don’t buy these junk They need to label de parts She said bottom. Both horizontals parts are the same video go to fast
Half day and haven’t pass the first step
I’m about to take it back to Lowe’s !!!!
IKEA instructions are a 1000 times better !!!!!!
WTF my instructions are wrong. My set says the spring loaded rollers go on top and the bolt load rollers go bottom. No effing joke. 🤬
Item 12 shows the picture with the nut and bolt as the bottom roller.
Hi There - Sorry for the frustration! You can always give us a call at 800-442-1902 and a member of our Consumer Connection team will be happy to provide installation assistance. Thanks!
now you tell me!!! lol
get that butcher a nut driver!
This is a huge waste of 500 dollars
codyrobertdavis! Huge waste
Lowes has it for under 200$
Your product is no good. I installed one and its very poor quality. From the start when putting the frame together only a screw joins the connections. There is no washer and not bolt to assure firmness. The frames are very thin and the screw for the frame barely screws onto metal. This turned into a nightmare. Please fix your products.
Horrible instructions, the video is very confusing as well. If anyone is installing this shower and already have drywall up you will have to cut a small portion out at the bottom for the base to slide up against the wall.
pachus