How to Check Track Tension on Camso Tracks

To check the tension on your Camso 4S1 Track, you'll need to follow these steps:
Park the vehicle on a level surface and turn off the engine.
Place a block or jack stand under the chassis to prevent it from moving.
Locate the track tensioning device on the vehicle. This can be either a spring adjuster or a threaded adjuster.
Determine the recommended tension for your specific track model by consulting the owner's manual or contacting the manufacturer.
If your Camso 4S1 track uses a spring adjuster, measure the distance between the tensioning device and the idler wheel. If your track uses a threaded adjuster, measure the distance between the adjusting nut and the idler wheel.
Compare your measurement to the recommended tension range. If the tension is too loose, tighten the adjuster until the correct tension is reached. If the tension is too tight, loosen the adjuster until the correct tension is reached.
Repeat the process on the opposite side of the vehicle.
It's important to ensure that both sides of the track are adjusted to the same tension, and to periodically check the tension to ensure that it remains within the recommended range. Incorrect track tension can cause excessive wear on the track and idler wheels, as well as reduced vehicle performance and stability.

[@casteel6163]

Promo*SM