The Load Bar Assembly | The Continuum WD Hitch

The Continuum Weight Distribution Hitch guarantees a smooth and quiet ride thanks to the light-weight, sturdy, and flexible spring bars used in the Load Bar Assembly's unique single-unit design.
Made with Hendrickson's LITEFLEX® composite technology-the same material used to manufacture composite Leaf Springs found on big rigs-the Continuum's spring bars are lighter-weight, 5x more flexible than steel, and just as strong. This combination of strength and flexibility helps improves the ride and allows the Continuum to cover tongue weights ranging from 600 lbs. to 1,600 lbs. with a single set of bars. Built into a single unit assembly, the spring bars are designed to work in tandem and remain evenly loaded at all times. This, when combined with other features, enables the Continuum to offer immediate and continuous sway prevention from the moment pressure is added to the bars using the hydraulic system.
Additional Benefits:
▪ The Continuum's composite spring bars are corrosion resistant.
▪ The Load Bar Assembly, in conjunction with the Head Unit's single-pivot connection, helps to eliminate noise and wear points, resulting in a smooth and quiet towing experience.
▪ Setup is completed entirely on the driver's side, with pressure applied to the Load Bar Assembly by pumping the handle on the Hydraulic Pump until the desired weight is distributed off of the tow vehicle's rear axle.
▪ Disconnecting the bars is just as easy. Simply twist the needle valve knob on the hydraulic pump to release the pressure, fully extend the hydraulic cylinder, and use the release lever to remove the assembly from the head unit.
------------------------------------
Easier to use and adjust than traditional weight distribution hitches, the Continuum allows the user to have more control over their setup. Making it easier to achieve proper weight distribution, we've set out to provide an overall safer and more enjoyable towing experience.
Learn More: bwtrailerhitches.com/product/...
#bwtrailerhitches #towingadventure

[@spacey7215]

I’m really interested in getting a new weight distribution for my travel trailer. How does the sway control performance on this system?

[@lookin4toons]

Will this system work with boat trailers? Around boat ramps and with the boat’s hydraulic brake systems?

[@BWTrailerHitches]

Compatibility with the Continuum will primarily depend on the style of trailer. It will depend on the trailer. The Continuum fits 5” and 6” frames without a center frame rail. (It will also fit 4” and 7” frames with longer or shorter cylinder mount hardware). You will need 2” of clearance in front of to install the frame brackets.