Modifying a Harbor Freight 30" Sheetmetal Brake | Sheet Metal Brake UPGRADES |
HTML-код
- Опубликовано: 29 сен 2024
- Here are a few quick modifications to the bench-mount Harbor Freight 30 inch sheet metal brake that greatly improve the usability and efficiency of this affordable brake.
DIY Projects:
• DIY Home Projects
VW Beetle Videos:
• 2001 VW Beetle
D100 Videos:
• 1975 Dodge D100
Charger Videos:
• 2017 Dodge Charger
Fitness Videos:
• Playlist
You can always find me here:
Webpage: www.wjm-indust...
Facebook: / wjm.industries
Instagram: @Moonbuilt
Twitter: @BuiltMoon
Tools Used For This Build:
- Compression Spring 9657K143 McMaster bit.ly/3gj31t1
- 1 ¾” Coupling Nut 90977A195 McMaster bit.ly/3gnTctA
What I Use To Film:
Canon EOS M50: amzn.to/3aRNRbw
DJI Osmo Action: amzn.to/3aR2E6x
Zhiyun Smooth 4 Gimbal: amzn.to/2YKrkto
Rode VideoMic Me-L: amzn.to/3pUx1RI
Rode VideoMicro: amzn.to/3nBqFng
Rode Wireless Go Wireless Lavalier: amzn.to/2RoROO3
Vijim LED Video Light: amzn.to/3gW5mLV
Thronmax MDrill Zero Microphone: amzn.to/2ZR23cK
AmazonBasics 60-Inch Lightweight Tripod with Bag: amzn.to/2ZxEVzP
Vastar Smartphone Mount: amzn.to/2NE5JMp
eBay - ebay.to/3CE3bo4
Amazon - amzn.to/3j769Zo
Automotive Parts at Jegs - jegs.ork2.net/...
Custom T-shirt Designs at Printful - bit.ly/3pSuebT
Disclaimer: Some of these links are affiliate links where I'll earn a small commission if you make a purchase at no additional cost to you. This helps support the channel and allows us to continue to make videos like this. Thank you for the support! All opinions are my own and presented without editorial input from outside sources.
Disclaimer:
Due to factors beyond the control of MoonBuilt Garage and WJM Industries LLC, we cannot guarantee against improper use or unauthorized modifications of this information. MoonBuilt Garage and WJM Industries LLC assume no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. MoonBuilt Garage and WJM Industries LLC recommend safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of MoonBuilt Garage and WJM Industries LLC, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not MoonBuilt Garage or WJM Industries LLC.
Produced and owned by WJM Industries LLC
#MoonBuiltGarage #DIY #Howto #Harborfreight #Tools #Sheetmetalfab #Fabrication
i added a 3/8" thick flat bar to mine, also some longer handles to the side
This is a great modification to that tool.
I just mounted this model I picked up today open box for $45. as soon as I made my first bend I realized I needed to modify it. this video covered all the issues I intended to address. thanks
Glad to help! Thanks for watching
great video! Have you considered adding a pressure point in the middle similar to the 30" model and others that are sold? Something like round bar bent in an arch with a nut / bolt welded in the center to push down...
I haven't....I may have to look into that
Very nice, well done. I have a smaller brake and use thinner stock.
If anyone is curious, I restore old film cameras and battery powered accessories. Such as slide viewers etcetera.
Alkaline battery leakage sometimes eats through and ruin’s battery contact strips. I pattern the new brass to match the old piece. Then use a “Micro-Mart” (Similar to H.F’s.model.) small bending brake to bend the brass sheet and drill the necessary holes.)
It works very well. I do notice that the work-piece sometimes “Walks“ a few millimeters, unless the clamps are very tight. I find, switching from a vice grip type clamp to a 3 inch “C” clamp works better.
I may try your modification on the Micro Mark version of the bending brake.
Thanks
Tom
Thanks! Like the simplicity of the mods. I think I’m going to turn the angle iron you weld on the clamping plate so it’s in the V shape ordination. Point facing up. I think that would have the same effect as gussets.
Thanks. I thought about doing the same, but I like having the flat area just incase I do need to ever clamp it
16 sheet metal. Could you guess how it would do with 3/16 aluminum?
Thank you
my suggestion for an analog clamp... look at a pair of vise grips for how they clamp... you can use an offset lever to do a secure clamp instead of a pair of bolts, if you want to speed up the clamp and release process... excellent work though... it's always a balance between cost and functionality... =D
Good video. Well explained fixes for well-defined issues. I'll be doing something similar, I suspect. I will also be looking to try to increase the bend to greater than 90 degrees.
I like that modification and think im going to do would it help if you welded a piece of flat bar on a 45 degree across the front of the angled piece im sure its not flexing as much in the back as it is in the front
Thank you very much.
Excellent improvements, I will incorporate them into my 30# HF Sheetmetal Brake
PS1-I think that 30" brake is for a max of 18 gauge sheetmetal?
PS2-The links do not go to the specific product.
The links will get you to the correct page...with McMaster there was no way to link directly to the individual part, just the page with the size options
That's pretty cool I'll be doing that tomorrow to mine
Great content and upgrades. It looks like a good entry level investment.
Can the clamps get closer to the bend to hold that edge of the top plate tighter?
Inspiring. I might "love the one I'm with" rather than building a bigger one. Thankyou for sharing.
Thanks for watching!
Nice 👍
can you please tell me which compression spring and which coupling nut you actually bought from McMaster Carr?
Thanks.
There's a link in the video description with the mcmaster carr part number
A well thought out and structured video - great job! I've been needing a small brake, so I think I'll pick one up and do these mods.
Thanks. This break has handled most of my needs
Very well made instructional video. No time wasted with extraneous chatter.
Thanks!
I like the way you have eliminated the clamps so that a wider piece of stock can be bent easier than the factory model. 👍
Thanks 👍
Great job! I plan on doing the exact same thing. Thanks for the tips.
Glad it was helpful!
Could you just sit that strengthening bar a bit back as opposed to the slots ? Great video 👍😊
Not sure really. I think it needed to be where it is for everything to line up and be supported properly
@@MoonBuiltGarage yea I gotcha ……I had seen some one else mod a brake and they made a point to remember not to put the bar too close so you could get full bend . Just didn’t know if the notch made it easier for something I didn’t think about . Im having a tough time sourcing the bolts…was it 5 inches long by 1//2 you found worked best ?
I honestly don't remember what size bolts I used...that was recorded awhile ago
@@MoonBuiltGarage gotcha…well thanks anyway . Thanks for video and getting back to me ! Cheers 🥂
Thank you
How long are the 1/2" bolts you used?
Honestly I don't recall...long enough so there is enough threads for the nuts to screw onto lol...dealer's choice
To eliminate flex, weld a 1/4'' flat bar onto the length of the angle iron to form a triangle.
I need to do that...I have run into a bit of flex, but nowhere near the amount before making the mods
Welding the angle iron up side down like a traffic cone would be much stronger and it would add support to the front and back of the flat bar. The bolts on each end would need to be re worked. thanks for the ideas i will be modifying mine this week. Any more info on the springs the link you posted list all the springs.
Good. Idea ,thank you 10:26
Glad you liked it!
Well done. Thanks.
Thanks for watching!