Been flying this quad for 2 weeks now. I’m digging it. Long flight times. Steady 1km range in my rural back yard. GPS return and buzzer all work great. And durable. I’ve kart wheeled it several times at speed and nothing but battery ejections. I’ve ordered replacement legs for it and all legs are the same which is nice. Awesome kit to get into it. I wasn’t sure I’d like the t12 transmitter but I’m loving it. It will replace my taranis as my daily
Fantastic flying and review, Albert!!! 😃 I really would love to see a quad like that with Express LRS and the ceramic antenna... To see how long can you go with it! 😃 But I don't think there are boards out yet for that. Anyway, stay safe there with your family! 🖖😊
Thank you for your honest opinion and clearing up some questions I had about this device. There is this one channel that literally tries to sell everything, especially to beginners.
There's like 50 channels that do that and they are sprouting up like weeds everywhere. Also, the FPV drone companies are sending more than ever to those guys since they are able to convince all the suckers to buy buy buy.
1 of the 4 of my batteries does not charge properly.. it actually discharges when I plug it into that blue charger. I am looking to buy a much better charging unit. I lost my GPS rescue unit after a crash on soccer field.. remember to hot glue or tape it down. velcro broke in half and broke 2 arms. But I love this drone AND cheap to fix.
One arm so far and wires pulled out of motor ,lost gps but found , chopped off reciever antenna and battery strap is pathetic, but it flew well before all this and enjoyed flying it. Now the fix.
Love that last landing. lol! Better to land on the grass? Thanks for the review and nice flight. Might be nice to see how much a gopro kills the flight duration.
I am trying to find the bind button ... it unbound it self after not flying it for 3 to 4 months.. the Tx12 isn't reading it. Can u do another video.. showing radio stock screen settings. goggles still give video feed from drone just fine.
I'd personally go with a tiny whoop kit for safety but if you feel like you can handle this bigger and much faster quad, it will work fine but this one probably won't take a lot of abuse and crashes that most beginners will subject it to.
So I tried to bind my Novice 4 because for some reason after not flying for 4 months waiting on replacement parts.. it unbound it self - using Betaflight the drone was spinning really quickly. Anyways I accidentally erased the whole drones factory settings. Buy a new Novice 4? Tx12 settings were all messed up too.
Sounds like its pretty messed up. It will be way easier to just start over with a new one and use the existing stuff for spare parts later when you learn more about how to repair your drones.
@@AlbertKimTV yes I am leaning toward just buying a new kit.. I really liked it when I was flying it.. I will probably take it apart and experiment with it and maybe swap out receivers etc. Thank you.
My TX12 croaked while I was learning to fly on a simulator. Just got it back from factory but of course, the model is gone and it's no longer bound to the drone. When I build a new model for it, will the GPS rescue work or will I have to set that up in Beta flight? Thanks
GPS rescue was not setup out of the box in the first place so you have to set it up. See this video for help... ruclips.net/video/NL6X7SQ8wK4/видео.html
Can someone please tell me how to reset my novice 4 rtf kit. I plugged into betaflight trying to set my switches now it won't do anything but it acts like it's still binded... Anyone help me please
@@AlbertKimTV first thanks for all the videos you make for use noobies. When I hook it to betaflight everything seems fine. I'm at a loss.. I'm going to have to find someone to login a screen share problem I guess.. Everything moves fine but won't arm or find any gps.
Regarding my last video comment, snaochat me. If you’d sell this set up!! Would die for this! I have 200 I can send if you’d sell this if you’ve got it still?! Been flying sims for over a year, and ready to make my journey into fpv
🛒 Eachine Novice4 RTF Starter FPV Kit - bit.ly/3uTrCJN
Been flying this quad for 2 weeks now. I’m digging it. Long flight times. Steady 1km range in my rural back yard. GPS return and buzzer all work great. And durable. I’ve kart wheeled it several times at speed and nothing but battery ejections. I’ve ordered replacement legs for it and all legs are the same which is nice. Awesome kit to get into it. I wasn’t sure I’d like the t12 transmitter but I’m loving it. It will replace my taranis as my daily
Thanks for sharing
Hey man I got a few questions about it!! Distance of flight? How long are you getting out of flights from what batteries? How quick cruising?
A video for the novice is a great idea. Cheers
Thanks 👍
Thanks for the honest review. Looks like a nice kit but don't crash it!
Fantastic flying and review, Albert!!! 😃
I really would love to see a quad like that with Express LRS and the ceramic antenna... To see how long can you go with it! 😃
But I don't think there are boards out yet for that.
Anyway, stay safe there with your family! 🖖😊
Thank you for your honest opinion and clearing up some questions I had about this device. There is this one channel that literally tries to sell everything, especially to beginners.
There's like 50 channels that do that and they are sprouting up like weeds everywhere. Also, the FPV drone companies are sending more than ever to those guys since they are able to convince all the suckers to buy buy buy.
@@AlbertKimTV 😠 you keep being you. Great work.
Great job with the video. I especially like how you tested the return function. Would definitely like to see a video on not crashing!
😎
Nice review and gale force wind test.
Thanks 👍
RC DRONE. By the way your content is great!
Glad you enjoy it!
Great video
1 of the 4 of my batteries does not charge properly.. it actually discharges when I plug it into that blue charger.
I am looking to buy a much better charging unit. I lost my GPS rescue unit after a crash on soccer field.. remember to hot glue or tape it down. velcro broke in half and broke 2 arms. But I love this drone AND cheap to fix.
One arm so far and wires pulled out of motor ,lost gps but found , chopped off reciever antenna and battery strap is pathetic,
but it flew well before all this and enjoyed flying it. Now the fix.
😎
It is a nice kit to get into fpv. The quad itself flys great but the motors are very rough.
👍
Hey, please share the strategy of learning w/o crashing. Thanks
@@miklosko3355 Which simulator can you recommend?
@@miklosko3355 Thanks
Love that last landing. lol! Better to land on the grass? Thanks for the review and nice flight. Might be nice to see how much a gopro kills the flight duration.
😁
It's Any chanse to buy almost same set but with longer range fly?? Thanks
You can add an ExpressLRS receiver and TX module to the radio for longer range.
I am trying to find the bind button ... it unbound it self after not flying it for 3 to 4 months.. the Tx12 isn't reading it.
Can u do another video.. showing radio stock screen settings.
goggles still give video feed from drone just fine.
I'm using the receiver and radio and goggles from this kit with the Wizard V2. Complete setup guide here... ruclips.net/video/xLcTv6eExcw/видео.html
Thanks for video....
Does it have a stability or angle mode...?
Would this package be good for a beginner? (i see the goggles and tre transmitter aren't that bad for a beginner)
I'd personally go with a tiny whoop kit for safety but if you feel like you can handle this bigger and much faster quad, it will work fine but this one probably won't take a lot of abuse and crashes that most beginners will subject it to.
@@AlbertKimTV so something like the tinyhawk II ? I saw there is a package with goggles and a transmitter?
So I tried to bind my Novice 4 because for some reason after not flying for 4 months waiting on replacement parts.. it unbound it self - using Betaflight the drone was spinning really quickly. Anyways I accidentally erased the whole drones factory settings. Buy a new Novice 4? Tx12 settings were all messed up too.
Sounds like its pretty messed up. It will be way easier to just start over with a new one and use the existing stuff for spare parts later when you learn more about how to repair your drones.
@@AlbertKimTV yes I am leaning toward just buying a new kit.. I really liked it when I was flying it.. I will probably take it apart and experiment with it and maybe swap out receivers etc. Thank you.
Use hot glue or clear rtv silicone from The Home Depot and the antena tubes will stay in.
👍
whats the lowest voltage I can bring the batteries? I've already changed arms.. props and motors.
3.5v
My TX12 croaked while I was learning to fly on a simulator. Just got it back from factory but of course, the model is gone and it's no longer bound to the drone. When I build a new model for it, will the GPS rescue work or will I have to set that up in Beta flight? Thanks
GPS rescue was not setup out of the box in the first place so you have to set it up. See this video for help... ruclips.net/video/NL6X7SQ8wK4/видео.html
What simulator do you recommend on this radio .
I took this out for a fly and it was a disaster.
Thanks
Velocidrone or Liftoff are the two most popular ones.
How much run time would you say you had when the motor bearings started making noise?
Maybe 15 flights? I have close to 100 now and it has not gotten any worse.
@@AlbertKimTV thanks!
Yes please make a video I can fly it in line of sight but as soon as I put goggles on I’m lost
👍
Does this drone have stability mode?
It does. I just don't fly that mode.
Can it fly in the forest with very poor gps reception?..
It will fly just fine. GPS rescue might not work however.
Im planning to buy 1. But, im worried about the gps lock. It is mentioned that the motors will not armed...
What does RTF mean?
Ready to Fly
@@AlbertKimTV thanks!
this should not be anybody's first quad,this should be called the eachine long range rtf. great video.
what is the range of this goggle?
With a powerful VTX perhaps as far as 50km?
@@AlbertKimTV i have akk nano race vtx with 25,200,400 mw.
so for 400 mw any idea?
Can someone please tell me how to reset my novice 4 rtf kit. I plugged into betaflight trying to set my switches now it won't do anything but it acts like it's still binded... Anyone help me please
I saw Albert had a good drone setup video. You can follow that guide to get the switches working again. ruclips.net/video/19i8ob7u3rE/видео.html
Yes, you can follow my guide from Frank's comment and set up your switches the way you want.
@@AlbertKimTV first thanks for all the videos you make for use noobies. When I hook it to betaflight everything seems fine. I'm at a loss.. I'm going to have to find someone to login a screen share problem I guess.. Everything moves fine but won't arm or find any gps.
Anyone computer smart and would team share my screen and help a FPV NOOB
Regarding my last video comment, snaochat me. If you’d sell this set up!! Would die for this! I have 200 I can send if you’d sell this if you’ve got it still?! Been flying sims for over a year, and ready to make my journey into fpv
Sorry don't have it anymore
😒😒😒