Here's a tip for you. When your first magnet is in place and you are aligning the parts to find the second magnet's place, put a small dot of paint in the center of the magnet to put the parts together. This should leave a dot of paint on the other part right where your magnet needs to go.
Hey sorry for the late reply, yes all the magnets for the head are 3x1mm. Start with the knife then use the 2mm (5/64) to enlarge the hole before going to the 3mm (1/8) drill bit. Doing it this way makes it easier and more precise with less chance of the drill bit trying to walk around on you.
Hey sorry for the late reply, for the wings and inside the torso I used 7x3mm,for all other arms I used 5x1mm but I would suggest 5x2mm if you can find them and then yes 3x1mm on the head
Super under rated video. Helping me a ton with this new onslaught swarm that came out last week!
thanks
I think I will buy an extra body for the winged version. it will be simpler
Here's a tip for you. When your first magnet is in place and you are aligning the parts to find the second magnet's place, put a small dot of paint in the center of the magnet to put the parts together. This should leave a dot of paint on the other part right where your magnet needs to go.
Could you give us the exakt Amazon link for the parts you used?
So for the head magnet all are 3x1 mm magnets, however in order to to the hole you first use acharpknife -> then 2 mm -> 3 mm? right?
Hey sorry for the late reply, yes all the magnets for the head are 3x1mm. Start with the knife then use the 2mm (5/64) to enlarge the hole before going to the 3mm (1/8) drill bit. Doing it this way makes it easier and more precise with less chance of the drill bit trying to walk around on you.
@@MiniNewb thanks bro
No problem just make sure the magnets are neodymium or “rare earth magnets” they are stronger!!! 👍
Hi. What's the exact size of the magnets on the wings? Thank you for these awesome video!
Hey thanks for the comment I’ll bring my digital calipers from work tomorrow and get the exact size for you.
Hey so the exact size of the magnets for the wings is 6.28mm x 3.01mm, honestly the bigger the better so I would go for 7mm x 3mm
Thank you very much, That is so much help! I'll start my winged today!
Hello whats size of magnets do you use?
Arms 7x3
Body 3x2
Head 3x1
??????
Thanks
Hey sorry for the late reply, for the wings and inside the torso I used 7x3mm,for all other arms I used 5x1mm but I would suggest 5x2mm if you can find them and then yes 3x1mm on the head
@@MiniNewbwhy do you suggest 5x2 over 5x1 doesn’t the bigger depth make them harder to fit.
Where did you buy your magnets from? Im looking to magnetize all my nids from that same box
Hey sorry for the late reply, I don’t have anywhere local that can supply magnets that small so I had to get them off Amazon.
My man what the fuck is playing on your TV lmfao
Haha only one of the greatest shows of all time “it’s always sunny in Philadelphia”