I wanted to correct my original comments about the jetting size on the Nibbi carb. I used the 120 jet, not a 140. Also, the newer Coolster carb doesn't allow you to remove the fuel bowl.
I am interested in upgrading the carb on my Coolster 3125R 125cc quad, and I don't think I am finding the right boot connector for the air intake. Could you please post the link to the exact carb and boot connector(s) you used? It would really help me out a ton!
Hey I really need help with my new 2019 qiye coolster 125cc I need to know where can I get a new air filter & a new exhaust muffler because my old muffler is hanging out please if u see this comment comment back
Was the Sprocket 12T worth it ?? Or am I better off going up on Rear Sprocket? To get the same kind of Acceleration ? And spacers how they hold up? Thanks for this video Sir.
Brett, are you still happy with the Nibbi carbs? How did the Nibbi bolt up to the to the green Coolster with the shorter intake manifold? Where you able to use the stock pilot jet that comes with the Nibbi?
Still happy with all the upgrades. We bought a large piece of land and my boys have been ridding their quads all summer with no issues. My 6 year old saved up his money and bought that Apollo 110 dirt bike. That thing screams!! No upgrades on that guy for a long time. I’m anticipating a E.R visit in the future. My youngest has no fear!
Did you have to get a different manifold intake pipe? I what a 125cc coolster and the 26mm carb doesn't have the same flange connection, so I got a the gofit intake manifold pipe for the GY6 and this makes my carb sit at an angle which is messing up the floats and causing it to run rich
I bought the Nibbi CG intake manifold air joint boot connecter. The carb doesn’t sit totally level. But it works and it a million times better than that garage stock carb.
Hey Brett, any updates with the Nibbi's performance on Coolster ATVs? I have a 2017 Coolster that I'm on the fence, and was hoping to hear how well they have performed.
@@Thebeast-oi9zg Thanks for confirming. I would love to see a video of how the ATVs run. Just watched the 110cc Apollo bike video, that thing screems right off the line for a single speed. I also forgot to ask, are your Coolsters a 3 speed or full auto?
So the Nibbi carbs are a very solid upgrade. My boys put a full weekend of riding on them at the dunes, and we had zero issues. I might pull back my recommendation on the sprocket change. One of the clutches on the quads has already wore out. The replacement was only 12 bucks. But I’m going to swap it out and see if they hold up. I’m thinking I actually caused the clutch to wear out since I was riding it around after each mod. If the other quads clutch wears out I’ll let you know. Other than that, these things are damn solid! I had a ton of local campers asking about them.
Brett, thank you for confirming. Did you need to purchase any additional parts to install them into the Coolsters? Any pictures you could post up of them installed? I have a Coolster, and an Apollo 125 Atv that I am considering installing them into. Are your ATVs fully auto, or semi auto?
Hey Brett, could you provide the links to the adapter, and the carb you installed? Have you pulled spark plug to verify the air/fuel mix is good? I didn't realize the carb in the video was the Nibbi unit. Could you confirm your elevation? Thanks again Douglass
I wanted to correct my original comments about the jetting size on the Nibbi carb. I used the 120 jet, not a 140. Also, the newer Coolster carb doesn't allow you to remove the fuel bowl.
I am interested in upgrading the carb on my Coolster 3125R 125cc quad, and I don't think I am finding the right boot connector for the air intake. Could you please post the link to the exact carb and boot connector(s) you used? It would really help me out a ton!
Can You put the Amazon link for the 2017 one
U want mods? Better wheels straight piped and steering column that's what I did and mine does donuts for days
Hey I really need help with my new 2019 qiye coolster 125cc I need to know where can I get a new air filter & a new exhaust muffler because my old muffler is hanging out please if u see this comment comment back
Was the Sprocket 12T worth it ?? Or am I better off going up on Rear Sprocket? To get the same kind of Acceleration ?
And spacers how they hold up?
Thanks for this video Sir.
Can you make a vidieo on how you remove the baffle please
What gas filter? You didn’t post it.
Brett, are you still happy with the Nibbi carbs? How did the Nibbi bolt up to the to the green Coolster with the shorter intake manifold? Where you able to use the stock pilot jet that comes with the Nibbi?
Still happy with all the upgrades. We bought a large piece of land and my boys have been ridding their quads all summer with no issues.
My 6 year old saved up his money and bought that Apollo 110 dirt bike. That thing screams!! No upgrades on that guy for a long time. I’m anticipating a E.R visit in the future. My youngest has no fear!
@@Thebeast-oi9zg 🤯 I'm blown away a 6 year old saved that much A
You said you bought it online where did you buy it at
Do you know if there is a place on the quad to tell you the year it is??
Did you have to get a different manifold intake pipe? I what a 125cc coolster and the 26mm carb doesn't have the same flange connection, so I got a the gofit intake manifold pipe for the GY6 and this makes my carb sit at an angle which is messing up the floats and causing it to run rich
I bought the Nibbi CG intake manifold air joint boot connecter. The carb doesn’t sit totally level. But it works and it a million times better than that garage stock carb.
Bey what is the size of the wheel spacer u used n bore size.. no longer available the one u put in ur info..
Mines won't come on and I don't know what the problem is
Does it try to start when holdin starter or does it have no power from battery if that’s the case replace the battery or charge it and see wat happens
do you need to keep the foam on the air filter i took it off
Can you post the link for the carb pls
What model coolster is it? I haven’t seen any 125cc for $600-800???
Looks like a 3125
Hey Brett, any updates with the Nibbi's performance on Coolster ATVs? I have a 2017 Coolster that I'm on the fence, and was hoping to hear how well they have performed.
Carbs are running like a champ! They fire right up.
@@Thebeast-oi9zg Thanks for confirming. I would love to see a video of how the ATVs run. Just watched the 110cc Apollo bike video, that thing screems right off the line for a single speed. I also forgot to ask, are your Coolsters a 3 speed or full auto?
@@supermaga5351 where did you buy the 2017 coolster from
@@Arg.gabe10 I bought mine from ATVscooterstore.com. I worked with Steve. Not sure if he is still there, but I was very satisfied working with him.
@@supermaga5351 does it fit an adult thats like 5'9
Do you know what the hub spacer size is for these?
What kind of oil does these bikes take
15-40
Have you installed the new black carb yet? If so, how does it run?
So the Nibbi carbs are a very solid upgrade. My boys put a full weekend of riding on them at the dunes, and we had zero issues. I might pull back my recommendation on the sprocket change. One of the clutches on the quads has already wore out. The replacement was only 12 bucks. But I’m going to swap it out and see if they hold up. I’m thinking I actually caused the clutch to wear out since I was riding it around after each mod. If the other quads clutch wears out I’ll let you know.
Other than that, these things are damn solid! I had a ton of local campers asking about them.
Brett, thank you for confirming. Did you need to purchase any additional parts to install them into the Coolsters? Any pictures you could post up of them installed? I have a Coolster, and an Apollo 125 Atv that I am considering installing them into.
Are your ATVs fully auto, or semi auto?
Hey Brett, could you provide the links to the adapter, and the carb you installed? Have you pulled spark plug to verify the air/fuel mix is good? I didn't realize the carb in the video was the Nibbi unit. Could you confirm your elevation?
Thanks again
Douglass
brett bingham what are your thoughts on the 12t sprocket now?
Did you replace the rear shocks?
Where did you order it from?
I bought everything on amazon.
@@Thebeast-oi9zg Can you put the Amazon link for the 2017 one
I've heard all the Chinese ATVs are junk and parts can't be found
Not all
Just buy a Yamaha and not have to do all that!