Fitting Practice | Workshop Practice | Mechanical Engineering
HTML-код
- Опубликовано: 1 окт 2024
- List of VTU Lecture Videos
I Semester & II Semester VTU Lab Classes
Workshop Practice | Mechanical Engineering • Workshop Practice | Me...
Chemistry Lab Experiments | VTU | 14CHEL17 • Chemistry Lab Experime...
C Programming Lab | VTU | 14CPL16 • C Programming Lab | VT...
Physics Lab Experiments | VTU | 14PHYL17 • Physics Lab Experiment...
II Semester
M2 | Math-II | 15MAT21 | VTU • M2 | Math-II | 15MAT21...
Programming in C & Data Structures | 15PCD13/15PCD23 | VTU • Programming in C & Dat...
Basic Electronics | 15ELN15 / 15ELN25 | VTU • Basic Electronics | 15...
III Semester
ECE
ANALOG ELECTRONICS | 15EC32 | VTU • ANALOG ELECTRONICS | 1...
Network Analysis | 15EC34 | VTU • Network Analysis | 15E...
CSE
Analogue and Digital Electronics | 15CS32 | VTU • Analogue and Digital E...
EEE
Electrical Circuit Analysis | 15EE32 | VTU • Electrical Circuit Ana...
CIVIL
Strength of Materials| 15CV32 | VTU • Strength of Materials ...
Fluid Mechanics | 15CV33 | VTU • Fluid Mechanics | 15CV...
IV Semester
M4 | Math-IV | 15MAT41 | VTU • Engg Maths 4 ( 15MAT41)
Microprocessors and Microcontrollers | 15CS44 | VTU • Microprocessors and Mi...
Advanced Maths 2 | MATDIP401 | VTU • MATDIP401 | Advanced M...
V Semester
Automata Theory and Computability | 15CS54 | VTU • Automata Theory and Co...
Don't know a fucking shit but VIIT want me so I am here, so my friends spamming start karo 😆
Bhai sahi hai tuu😂😂
😂
Big fan Ayush Sir
@@avd_sa9636 tum log ko bhi bhej diya 😆
Viit students like here ❤
You guys measure the angle of your hands n legs ?????
Approximately
The very first rule of filing is : "file works only when it moves forward direction, so put pressure on file during forward motion, return backward should be no pressure"
Ok to not lift the file on returning stroke when filing thin workpiece you dont wanna loose the feel for the angle just dont press on the return stroke
Viit students 😘😎
I think she gives her 100% to explain
👍👍👍
Great video ☺️☺️☺️
Entra babu e work shops...
😂
❤Thank you so much dear ma'am . This information is really very informative for me.🎉💐🥀
Bolt your vice down hard on the bench,Use vice jaw protectors to avoid scratching the workpiece. You are rubbing the file on the work piece, The file cuts on the forward stroke only, you lift the file on the backstroke. Draw filing is when you move the file 90degrees to the workpiece, i have never seen anyone file the way you demonstrate the draw file.You use the wrong side of the square, the accurate parts of the try square are the inside edges, you do not use the outside edge. i am a UK trained Mechanical Fitter for over 40 years Maybe you do things different in your country.
What u said is right sir
What i know
1.you can file back forth for when you want very precise work where you dont wanna lose the feel or sense when holding a file.But yes a better way to preserve the file is to file forward with moderate pressure at moderate speed to prevent work hardening
2.the workpiece should be lowered close to the jaw of the workpiece so when you file it wont chatter or squeak
caused by the leverage of the workpiece being raised as it tends to brean the tip of the file teeth it may not be obvious but its there making your file cut inefficiently and leaving bad surface finish
3.use the full span of the file as much as possible except the tapered end in most case to evenly wear out the file
4.move your body and lock your hand near your torso for general filing or use whatever position you feel comfortable as long you can get the work done precisely.Though i dont reccomend stroking your hands for a long period of time
5.filing also takes patience very precise work can be done with hand tools if you have been doing it for a long period of time take a rest and think of how to get it done by imagining it for a day or two
Not being a comment warrior but hope yall can take it as a reference 😄
Yes different in india
Hard to watch you killing that file.
How did she get her certificate?
Firstly her English
Then her deburring skills
Then her clamping in the video
Then her position (why completely unnecessary)
Then her filing skills
is killing me.
Just watch this three video:
ruclips.net/video/h4KaiG7CpSQ/видео.html
ruclips.net/video/32FUysj-Lu4/видео.html
ruclips.net/video/lOR2UwZRBws/видео.html
Get the workpoece as near as you can to the jaw to prevent vibration for thin workpiece
Thanks mam
My body can't take that complicated geometry. leg 70, 270, 90, 45....
Beautiful. But two wrong are there:-
1) Draw filling procedure.
2) Always use anvil while chipping. While chipping never use surface plate as an anvil.
Only for somnath sir we are here.😏
Somnath Sir OP
Very good explanation and good practical explanation thankyou very much
Easy but very hard work how many student think like me reply and like 👇
The teaching method & english is awesom..❤😂
Awesome 😂
Really 🤣
OP!! Sir and Maam, OP!!! 🔥🔥💯
You guys teach like real OG's🤯❤️🔥
You Guys are Real OG's ❤️🔥💯
Sir Intro is awasome...Dressing style, specs Ahaaa...Full Professional.
Loved it ❤️💯
And Maam explain Hard very Easy
Inglis Of Mam...THUG LIFE ...Yo!🤘💯🔥
Thank You Maam...
Hope U guys Keep posting such OP Awasome Contents. 👍
Super good fitting operation
190011700053 himanshu Mech a
abhay kumar
190011700002
mech A
KARAN
190011720011
DET L11
MECHANICAL.A
Sir its my first year in 3 years diploma of mechanical engineering in one of the best institute 'ISTC CSIO-CSIR CHANDIGARH'
All the best ❤
What are the practical/ real life application for metal fitting?
Please provide subtitles
So we can understand at 2* speed 🙃✨
yeah i want admin to provides subtitles because it is really hard for me to understand your pronounciation
Good
Excellent demo sir/madam
Wrong guide .. you're punching on same surface don't you think that it wil spoil the marking surface then how you will get a proper bade point
First use hand gloves
Prince pathak 190011700091 mechanical B
Very helpful mam
Very helpful
Yes bro......karo start
I feel really tough for this things
हिंदी में explain hota to best hota .
Maam wt u said is very nice we understand easily that how to do
Hindi mai batai
While filing you should only apply pressure on forward stroke. The file cuts only forward stroke not back and forth like you're doing in this video.
❤
Use vice please
Marking step is wrong.. you have to remove that rough surface before marking . Otherwise that surface will spoil the height gauge marking tip which is really expensive and you will not get proper dimension if that edge is blended.
😄😄😄😄😄😄
Workshop assignment PDF download
Sir ham अमेरिका में है हमे इंग्लिस भाषा सीखने मे मदद् मिल रहा है मै मैकेनिक हु ऐसे बिडियो बनते rahia
Mam u clearly explained each and every process...it's really helpful mam... thanks a lot
Hi
Very helpful mam 👍🏻
Thank you so much, you said everything clearly
While filing i suppose u should not place ur pointing finger below the file as it may get hurt when it hits the workpiece by mistake
Mam please even teach how to do semicircle fitting!!!!!
Bastard file.. lol
Well it's better than a son of a bitch file
Urdu bol lo agr english nhi ati bdsk
What will be stroke per minute for smooth file?
Thanks mam
hi mam...
your work is so precise and perfect... which reveals that in your kitchen also you will make the chapati exactly in 360 degree sharp..
very nice...
thanks for the tutorial
😂😂😂
Sec H?
Ladies Technics 🔥
Super
Magnificent ❤
What does female and male path means🤔
Path nhi part*
i like the video but safety is an issue your vice shouldn't move it should be fixed to the bench tightly
Very good keep it up 👍
23:20 wow! what a cutting edge tool
It's a very helpfull video for me about fitting workshop. Thanks Mam.🙏
Jaya mam jindabaad
😂😂😂😂
4:40 Initial position
she is so skilled !!! 👍👍👍
Appreciable Efforts ✌️
Thank you ma'am 🙏🏻
Maa'm ur great instructer ....
Center punch used in drill operation. Not dot punch
Good preparation and presentation
thanks for this, this us very useful for me..
Nice mam
very nice
mam
Super join
Thq so much mam.... Very helpful mam
Tthankyou so much mam.. hatsoff to your effort
very nice formula
never mind worrying about clamping !!! but get your vice bolted down !
you do so much of filling and you realise that you ended up with a curved left hand thumb . Its scary you should take care of it .
Hindi
i am nttf student
bur I'm not comfortable to cutting a job, so please help me mam
useful are all
Are medam tum na smjha pa re he neend or ane lagre he.
Nice teaching mam
Very nice explained maim
very helpful
Divya Balu ap Kaya teacher ho
Ok
Very helpful ... Thanks ... Keep doing sir .. 😍
Hey Ziaa Brother, I’m sorry to correct you but he is a lady. Anyway, the presenter presented well, staying serious and take safety precautions and stroking right. Thank you sir. 😀
@@jasonlow7010 she* is lady
otherwise good work
Mam Hindi bola karo
very helpful ..
Thank you mam please uploade more videos
Its help us more...
How to get this video lecture in writen form...
If everybody is know that please tell me...
English bolne me problem hota hai to Hindi me bolna chahiye
Mam ye kis liye banaya ja raha h
I like
Drilling ues centre punch
why does this lady seem like Smriti Irani?
Good madam, I appreciate your skills, this shows your passionate in this field.