It's possible you just pay someone to go around leaving comments like this to advertise your channel - but I'd rather think the positive version that you really are just a cool dude involved in the community. :) If this really was you, it shows how genuine you are! Mad respect!
This video reminded me of how much I hated all the ribbons on these 3ds lol. Igot a new super Mario 3ds that everything worked except the left joystick and dpad. I took it apart and cleaned it and put it back together and now it just boots up the blue light for a bit then turns off and don’t know how to get it back to normal now. If y’all make a video on fixing it I’ll send it and hopefully you can fix it for me! I love these videos the quality is great
They use lots of jigs and fixtures to make assembly more automated and manual tasks easier. Nevertheless it would still be time consuming and quite expensive.
I feel your pain. All of it. Recently I did a full shell swap on one of these, and I too, said every curse word I knew and probably summoned several demons in the process. I replaced the bottom digitizer and the top lens with a glass one, and when I put it back together, the 3d function didn't work anymore. And I left it like that because I absolutely wasn't about to go through that again.
I recently repaired my childhood GBA because you inspired me too! An easy fix: a clean and replaced button membranes but I hope to install an IPS screen sometime in the near future! Thank you for your videos Elliot! ❤️
just getting those ribbon cables through that tiny hinge piece took me 4 hours when i did a camera replacement on my N3DS, since i was too stubborn to take the screen and speaker ribbon cables out and had to wedge that one ribbon cable around the others with limited movement since i never took the screen out. dont blame you for cursing, its hell.
I've been working on 2 of these for a little while and I've sorta figured something out about the top ribbon cables. I found that it is MUCH easier to just slide the camera one through first on its own since it goes on the outside of all 3 cables. Then, basically flip the camera ribbon up so its out of the way (kinda like how it is at 7:28) and it will leave a nice opening for the other ribbons to be fed through. You can actually do all 3 of them one by one as long as you put them in the right order. If I remember right, it's camera (black ribbon) on the outside (outside being the outside of the curl), then shorter orange, then longer orange. It still isnt EASY but its way easier and probably a bit safer than getting all 3 through the hinge at once. I tend to do the screen and speaker ribbons together cause of those two little connectors that attaches them (those ones at 5:50) its still super nerve wracking but hopefully this helps someone do this repair with a little less stress :) Ive had to undo these 2 that I have like 10 times now for testing different components and swapping stuff out and it's definitely helped me.
I absolutely hate ribbon cables, and I will never open one of these devices ever because of what I just saw. Great work on your part and I applaud your determination because I would never have the patience. Especially after how many ribbon cables I've torn.
I've rebuilt a few Gameboys and a DS Lite, and I just pray that my 3DS XL never dies because I do not want to do this repair, ever. I still have nightmares from feeding that coiled screen cable through the hinge of the DS. It boggles my mind how companies can produce these kind of devices at scale, the factory workers are wizards.
Wow Elliot. Bravo man! My hat goes off to you! That looked very stressful, and confusing taking apart! I believe you when you say it's hard taking them apart.
You're a champ, great repair! People love to rag on Nintendo for their minimalist handhelds, but each one is really an engineering masterpiece. That said I've noticed the LEDs in the top screen of my New 3DS XL getting dimmer after many years and I'm not looking forward to this replacement.
I have an original 3DS XL I managed to drop in a moment of crisis and the hinge is gone. It has all my Pokémon games on there and I shed a tear every time I see it languishing in my drawer 🤣
Oh man! Thank you so much for this video!! I have to do my own screen repair. I got it all open and read about the ribbon cable mess and closed it back up for another time lol. With your video as guidance I'm going to give it another go! Love your videos dude!!!!!
I've done a DSi XL repair, with no prior experience. Yes, getting the ribbon cables back through the hinge was definitely the worst part. After I finally managed to get them through, I thought they'd be broken by then, but somehow they weren't.
Great video! With the knowledge that the bottom screen isn't that bad to replace, it might make my search for a N3DS XL with dual IPS screens a little easier if I can just put the bottom one there myself. Finding a bottom IPS screen could be difficult though.
I have this same model of 3DS that needs a replacement circle pad... I've never been brave enough to attempt to fix it myself, and have no idea where I could get it fixed nowadays. Sad, I loved that thing!
Yeah these things are absolute nightmares to work on. I remember all I wanted to do to mine was clean the bottom of the screen, but I kept causing more problems as I disassembled. It now sits in a drawer in my closet half working
You may not like the ribbon cables, but you are a master at plugging them. And yes, I know there is a lot of editing, but just by watching to the "good ones" I can tell you are reaaally skilled.
The top screen was broken, but I had a Rorschach moment. Those broken screens always make me think of black ink, and I swear I saw a few Bonsai trees on a weird mountain at night. It's at the 11 second mark, so it's not that hard to find.
I’ve had one of these get fixed as there was dust between the digitizer and screen. They forgot to plug in the L button ribbon cable. It either went to Nintendo. Or the game store sent it to a third party repair shop
The New 3DS XL is my favourite piece of Nintendo hardware ever. Even the way its put together is premium. Thanks for doing this and to the person who donated the money
The music is so warm and calming. Sad it loops so quickly... Still makes me want to play MineCraft rolled up in a nice cosy with a woodfire and unlimited hot chocolate.
Hi. I broke the latch that secures the digitizer to make the touchscreen work at 8:56 . is there anything i can do to fix? ive tried tape but its hard to tape that specific part with all the other cables in the way. if i replace the motherboard will my save data be gone?
I’ve replaced the thumbstick and ribbon cables for the shoulder buttons on my original 3ds and that wasn’t too bad but I can’t say I’d wanna do anymore work than that on any 3ds. Not a fan of fluffing around with ribbon cables
Elliot maybe you can help me. I want to do custom color buttons for the OLD 3DS XL. Regardless what is typed in Google NEW 3DS XL buttons show up. I know they are completely different but can I use OLD 3DS custom buttons on a OLD 3DS XL? The only colors I see for the OLD 3DS XL are black, white, gold and pink. I don't understand why there aren't custom buttons for the OLDER 3DS XL. The center buttons are stuck to those colors but the directional and A,B,X,Y. I have to repair the shell and want to customize it while it's apart.
Ah, I got this exact same model for free when I bought some 3ds games from a lady, she said she was going to throw it away before offering it to me. It has a cracked top screen, similar to how it looks on your video. Hopefully I'll be able to repair it soon, gotta save money for the replacement.
I'm new to the game repair and modding hobby. The GB DMG and GBA ribbon cables stress me out. I'm pretty sure I'd drop into fetal position after opening the 3DS XL. Haha
Watching this after trying to fix my childhood 3ds I broke years ago, seems to all work now except the mic and the home button have stopped working lol...
Where did you get the top screen from? I've been trying to find a seller that sells good quality screens that top one looks to be ips but I did only catch a glimpse of it so I could be mistaken. Nice video as always hope to see more 3ds fixes in the future!
IMPORTANT QUESTION: If i dont repair the screen (mine is not that badly damaged) is it possible that the console damages itself even more? Please i need an answer!
"these screens are very expensive" Couple minutes later "Oopsies i ordered the wrong screen lol." I feel that tho. Sometimes they just send you the wrong screen too (':
How easy would it be to place the working motherboard instead in a 3DS that was dead (bricked maybe) since all the data etc is stored here which makes each 3DS unique?
Nice to see a high-quality version of this repair job. All the other videos out there look pretty tacky. Ifixit is somewhat helpful but the version up is hard to follow. This is perfection
Dang thats bad i have the older 3dsxl and after nearly 10 years later my top screen broke would not come on and im sad it did that its been adult owned and taken well care of now iv got two choices i either find a new working or a parts 3dsxl and fix it i havent taken one apart so fixing gonna be hard but im willing to try if i can a broken parts 3dsxl
The New 3DS XL might be my favorite handheld of all time... but the ONLY thing wrong with it is that changing the SD card is a massive pain in the ass vs. the OG 3DS.
Ok, love your videos, and no offense but, was this supposed to be a guilt trip? I mean, repairing electronics like this can be a pain, sure. But the whole video was complaining about how much you hated doing this. I mean, I even once repaired a PS4 controller for my brother myself (my niece had somehow gotten grape jam inside it) and I hate repairing those for the same reason, ribbon cables. The whole time he's sitting there thanking me and apologizing and I didn't say a word. I just fixed it and said, "Please be very careful with it, because I am *not* fixing it again.".
Can't believe my 2DS has no broken pixels after 4 years! (Edit: I can't wait for Christmas! I'm getting an amiibo of myself and Smash 3DS!) I'm happy that I have no hinges on my 2DS.
Was just thinking, you do a lot of DS and 3DS content, but not really DSi. Is it just chance, or are they less sought after for some reason? My last portable console was a DSi XL, and before that a regular DSi. I had the much longer than my DS lite. So I was just wondering. Funnily enough I never had a DSi game, I'd just play my DS cartridges.
Ohhhhhh boy. I didn’t show it working. Great job Elliot! There’s a video on this channel showing it working. Quickly watch it!
Done! 👍🏻
That's a sneaky plug and a half. Nice Elliot.
you forgot "new" in the title
Where's the video that you opened the package it came in?
Haha I'm happy you actually made a video showing it working 😂
Nice work! Those are difficult to replace. Loved the relaxing vibe in this video.
its the man himself
Thanks Man!
It's possible you just pay someone to go around leaving comments like this to advertise your channel - but I'd rather think the positive version that you really are just a cool dude involved in the community. :) If this really was you, it shows how genuine you are! Mad respect!
Didn’t expect you here
This video reminded me of how much I hated all the ribbons on these 3ds lol. Igot a new super Mario 3ds that everything worked except the left joystick and dpad. I took it apart and cleaned it and put it back together and now it just boots up the blue light for a bit then turns off and don’t know how to get it back to normal now. If y’all make a video on fixing it I’ll send it and hopefully you can fix it for me! I love these videos the quality is great
This makes me have serious respect for the workers assembling these units.
They use lots of jigs and fixtures to make assembly more automated and manual tasks easier. Nevertheless it would still be time consuming and quite expensive.
What a lovely time I had watching this Elliot. So calm, you're helpin out a young lad, what a treasure.
That looks like it's a contender for simultaneously the most satisfying and stressful hobby.
I love how relaxing these repairs have become - great choice of music
I feel your pain. All of it. Recently I did a full shell swap on one of these, and I too, said every curse word I knew and probably summoned several demons in the process. I replaced the bottom digitizer and the top lens with a glass one, and when I put it back together, the 3d function didn't work anymore. And I left it like that because I absolutely wasn't about to go through that again.
But the upside was that afterwards I had a lime green n3ds xl instead of a beat up orange one.
lmfao
I recently repaired my childhood GBA because you inspired me too! An easy fix: a clean and replaced button membranes but I hope to install an IPS screen sometime in the near future! Thank you for your videos Elliot! ❤️
@yuriiXD oof.
@yuriiXD Go back to RUclips Kids
just getting those ribbon cables through that tiny hinge piece took me 4 hours when i did a camera replacement on my N3DS, since i was too stubborn to take the screen and speaker ribbon cables out and had to wedge that one ribbon cable around the others with limited movement since i never took the screen out. dont blame you for cursing, its hell.
Thanks for watching.. Congratulations for you've ve selected among our shortlisted winner.,Dm the telegram handle ⬆️to claim your prize 🎁
I've been working on 2 of these for a little while and I've sorta figured something out about the top ribbon cables. I found that it is MUCH easier to just slide the camera one through first on its own since it goes on the outside of all 3 cables. Then, basically flip the camera ribbon up so its out of the way (kinda like how it is at 7:28) and it will leave a nice opening for the other ribbons to be fed through. You can actually do all 3 of them one by one as long as you put them in the right order. If I remember right, it's camera (black ribbon) on the outside (outside being the outside of the curl), then shorter orange, then longer orange. It still isnt EASY but its way easier and probably a bit safer than getting all 3 through the hinge at once. I tend to do the screen and speaker ribbons together cause of those two little connectors that attaches them (those ones at 5:50)
its still super nerve wracking but hopefully this helps someone do this repair with a little less stress :) Ive had to undo these 2 that I have like 10 times now for testing different components and swapping stuff out and it's definitely helped me.
I absolutely hate ribbon cables, and I will never open one of these devices ever because of what I just saw. Great work on your part and I applaud your determination because I would never have the patience. Especially after how many ribbon cables I've torn.
Kudos to your skill and patience Elliot. I stopped repairing 3DS´ a long time ago. Indeed they are a NIGHTMARE to work on.
I love how at 10:40 he says very quietly "subscribe plz"
I've rebuilt a few Gameboys and a DS Lite, and I just pray that my 3DS XL never dies because I do not want to do this repair, ever. I still have nightmares from feeding that coiled screen cable through the hinge of the DS. It boggles my mind how companies can produce these kind of devices at scale, the factory workers are wizards.
Wow Elliot. Bravo man! My hat goes off to you! That looked very stressful, and confusing taking apart! I believe you when you say it's hard taking them apart.
Everytime I watch this channel I feel like I'm some sort of super tech genius.
You're a champ, great repair! People love to rag on Nintendo for their minimalist handhelds, but each one is really an engineering masterpiece. That said I've noticed the LEDs in the top screen of my New 3DS XL getting dimmer after many years and I'm not looking forward to this replacement.
I love that shiny blue case. I have the gray launch N3DSXL and love it, but that blue looks really nice.
I have an original 3DS XL I managed to drop in a moment of crisis and the hinge is gone.
It has all my Pokémon games on there and I shed a tear every time I see it languishing in my drawer 🤣
"How many ribbon cables do you want on the New Nintendo 3DS XL?"
Nintendo: *"yes"*
Oh man! Thank you so much for this video!! I have to do my own screen repair. I got it all open and read about the ribbon cable mess and closed it back up for another time lol. With your video as guidance I'm going to give it another go! Love your videos dude!!!!!
I've done a DSi XL repair, with no prior experience. Yes, getting the ribbon cables back through the hinge was definitely the worst part. After I finally managed to get them through, I thought they'd be broken by then, but somehow they weren't.
out of all the game console repairs i've seen, nothing to me has seem more of a nightmare than reballing a ps3 cpu or replacing them nec/token caps.
Great video! With the knowledge that the bottom screen isn't that bad to replace, it might make my search for a N3DS XL with dual IPS screens a little easier if I can just put the bottom one there myself. Finding a bottom IPS screen could be difficult though.
I have this same model of 3DS that needs a replacement circle pad... I've never been brave enough to attempt to fix it myself, and have no idea where I could get it fixed nowadays. Sad, I loved that thing!
Yeah these things are absolute nightmares to work on. I remember all I wanted to do to mine was clean the bottom of the screen, but I kept causing more problems as I disassembled. It now sits in a drawer in my closet half working
Saving this video for when I do the shell swapping of my new 3ds xl. This is great reference material! Thank you lots.
I always believed in you, Elliot. I wouldn’t have had the patience for taking a 3ds apart. I still have trauma from taking apart a ds lite
You may not like the ribbon cables, but you are a master at plugging them. And yes, I know there is a lot of editing, but just by watching to the "good ones" I can tell you are reaaally skilled.
The top screen was broken, but I had a Rorschach moment. Those broken screens always make me think of black ink, and I swear I saw a few Bonsai trees on a weird mountain at night. It's at the 11 second mark, so it's not that hard to find.
You did a great job, idk why shops stopped fixing old consoles :”)
Poor 3ds, but good that you fixed it for him!
Great work, I love how much is crammed into a DS/3DS.
I appreciate you....I personally love my NEW 3DS XL...#Respect....I've had mine for 6yrs + ....the top screen is just a little wiggly
Loving the back and better than ever content, really missed your regular uploads
Fantastic job and so kind of you to help someone out.
I’ve had one of these get fixed as there was dust between the digitizer and screen. They forgot to plug in the L button ribbon cable. It either went to Nintendo. Or the game store sent it to a third party repair shop
This video made me feel super relaxed, thank you!
This video feels a lot more like it was from the channel 3 years ago. It's peaceful... I like it.
The New 3DS XL is my favourite piece of Nintendo hardware ever. Even the way its put together is premium. Thanks for doing this and to the person who donated the money
I loved the mr Sheen at the end. So much nostalgia
I've never worked on 3ds systems before, much more well built than I had expected.
Now I want my Pokemon X and Y special edition 3DS XL repaired 😭
The music is so warm and calming.
Sad it loops so quickly...
Still makes me want to play MineCraft rolled up in a nice cosy with a woodfire and unlimited hot chocolate.
I caught this before I got a notification love these vids.
Hi. I broke the latch that secures the digitizer to make the touchscreen work at 8:56 . is there anything i can do to fix? ive tried tape but its hard to tape that specific part with all the other cables in the way. if i replace the motherboard will my save data be gone?
do more of this kind videos with chill music and repairing
I simply know who to look to if I need something of a nintendo console fixed. Very nice and generous of you here. Cheers
I’ve replaced the thumbstick and ribbon cables for the shoulder buttons on my original 3ds and that wasn’t too bad but I can’t say I’d wanna do anymore work than that on any 3ds. Not a fan of fluffing around with ribbon cables
Holy mother of Jesus, what happened
Bro slipped lol
Love the chill vibes in this video. I'll probably fall asleep to it tonight.
I love both of your channels. Go you, go Elliott
Elliot maybe you can help me. I want to do custom color buttons for the OLD 3DS XL. Regardless what is typed in Google NEW 3DS XL buttons show up. I know they are completely different but can I use OLD 3DS custom buttons on a OLD 3DS XL? The only colors I see for the OLD 3DS XL are black, white, gold and pink. I don't understand why there aren't custom buttons for the OLDER 3DS XL. The center buttons are stuck to those colors but the directional and A,B,X,Y. I have to repair the shell and want to customize it while it's apart.
Describing how difficult it is just to replace the parts 100% explains why capture card modifications were so expensive.
Ah, I got this exact same model for free when I bought some 3ds games from a lady, she said she was going to throw it away before offering it to me. It has a cracked top screen, similar to how it looks on your video. Hopefully I'll be able to repair it soon, gotta save money for the replacement.
I'm new to the game repair and modding hobby. The GB DMG and GBA ribbon cables stress me out. I'm pretty sure I'd drop into fetal position after opening the 3DS XL. Haha
Oh boy a good old fashioned repair video, thanks for the entertainment
Thanks for watching.. Congratulations for you've ve selected among our shortlisted winner.,Dm the telegram handle ⬆️to claim your prize 🎁
I feel like someone needs to start counting every time Elliot says “small little” and keep a running tally.
Haven't seen Mr Sheen in a while. Good to see he is still in the game.
Thanks for watching.. Congratulations for you've ve selected among our shortlisted winner.,Dm the telegram handle ⬆️to claim your prize 🎁
Watching this after trying to fix my childhood 3ds I broke years ago, seems to all work now except the mic and the home button have stopped working lol...
New 3ds have sooo many ribbon cables! I've been helping my friend fix his and trying to get all the ribbons plugged back in is really hard.
Where did you get the top screen from? I've been trying to find a seller that sells good quality screens that top one looks to be ips but I did only catch a glimpse of it so I could be mistaken. Nice video as always hope to see more 3ds fixes in the future!
D-pad is expected to see frequent impact and flexing, whereas cartridge slot isn't, and dependable connections for data access are more critical.
Finally Mr Sheen is back on the channel
let's goo
IMPORTANT QUESTION:
If i dont repair the screen (mine is not that badly damaged) is it possible that the console damages itself even more? Please i need an answer!
This repair has me staring at my failed attempt on my 2ds xl. I either have to reseat the top screen ribbon or buy another screen.
Lol. I just bought that very same new 3ds with a broken top screen and was going to atempt fixing it next month. I'll use this as my tutorial.
hey nice work! working on Nintendo Switches is definitely easier than the 3DS so I'm glad everything work out.
"these screens are very expensive"
Couple minutes later
"Oopsies i ordered the wrong screen lol."
I feel that tho. Sometimes they just send you the wrong screen too (':
Nice work Elliot !
How easy would it be to place the working
motherboard instead in a 3DS that was dead (bricked maybe) since all the data etc is stored here which makes each 3DS unique?
No
Modding a new model of 3ds is vary usefull for making videos sincs they can video capture over the local network
What's the song name? It's so relaxing :))
My blue-green 3DS has a broken screen, too, but it’s only the top screen. I broke it out of my own anger.
Message me on telegram let me help you out
I like to believe he made up that message at the end and actually he failed to get it working and just ended the video
Nice to see a high-quality version of this repair job. All the other videos out there look pretty tacky. Ifixit is somewhat helpful but the version up is hard to follow. This is perfection
Way too much effort for me to do. Well done elliot
Dang thats bad i have the older 3dsxl and after nearly 10 years later my top screen broke would not come on and im sad it did that its been adult owned and taken well care of now iv got two choices i either find a new working or a parts 3dsxl and fix it i havent taken one apart so fixing gonna be hard but im willing to try if i can a broken parts 3dsxl
Gotta shout out the Mr. Sheen, love it.
Mr Sheen cleaning all that grit.
The New 3DS XL might be my favorite handheld of all time... but the ONLY thing wrong with it is that changing the SD card is a massive pain in the ass vs. the OG 3DS.
Her look a crane bird is up top of the new 3ds screen 😂
If only you seen my 3ds, Ive been through your pain. The stupid thing wont turn on anymore.
Ok, love your videos, and no offense but, was this supposed to be a guilt trip? I mean, repairing electronics like this can be a pain, sure. But the whole video was complaining about how much you hated doing this. I mean, I even once repaired a PS4 controller for my brother myself (my niece had somehow gotten grape jam inside it) and I hate repairing those for the same reason, ribbon cables. The whole time he's sitting there thanking me and apologizing and I didn't say a word. I just fixed it and said, "Please be very careful with it, because I am *not* fixing it again.".
So glad I bought a new 2ds instead of fixing my broken 3ds screen
The music is quite nice and relaxing
Thanks for watching.. Congratulations for you've ve selected among our shortlisted winner.,Dm the telegram handle ⬆️to claim your prize 🎁
Yeah man, thats the stuff. A real fan who uses the gear.
Thanks for watching.. Congratulations for you've ve selected among our shortlisted winner.,Dm the telegram handle ⬆️to claim your prize 🎁
Can't believe my 2DS has no broken pixels after 4 years!
(Edit: I can't wait for Christmas! I'm getting an amiibo of myself and Smash 3DS!) I'm happy that I have no hinges on my 2DS.
Dude accidently got his 3DS mixed up with a nail.
Where is the P.O box opening video at?
Great video as usual, but that music made me want to go to sleep lol.
Oh the nighrtmare handheld. Greqt job!
Was just thinking, you do a lot of DS and 3DS content, but not really DSi. Is it just chance, or are they less sought after for some reason? My last portable console was a DSi XL, and before that a regular DSi. I had the much longer than my DS lite. So I was just wondering. Funnily enough I never had a DSi game, I'd just play my DS cartridges.
I always wondered where you learned to fix Gameboys?
Hey Elliot, the background music is awesome - would you mind sharing the title and artist?
Were i can found a grey top and bottom shell of my n3ds xl?
im honesryy so sleep depriced wnd tired rn your voice sounds like god
How to fix the thing where lower screen is black no damage just black lower screen
can you give me a website where i can buy cheap nintendo 3ds xl pls
Been there and got the t-shirt. Never again.... Lol. Great work as usual...
The 2DS is a doddle compared to this...