Black And Decker Workmate 125 - How To Use And Review
HTML-код
- Опубликовано: 12 сен 2024
- In this video I show how to use and review the Black And Decker Workmate 125 Portable Work Center And Vice. Make sure to wear the proper safety equipment, take all safety precautions, and ask for help if you need it. Also make sure that you read through the instruction manual before you use the Black and Decker Workmate 125 Portable Work Center And Vice. I have another video where I go through the assembly process on the Black And Decker Workmate 125 Portable Work Center And Vice that I will link at the end of this video. If you are interested and have time, please check that video out. Thanks for watching!
AFFILIATE DISCLAIMER PLEASE READ:
The links below are affiliate links. This means I will earn a small commission, at no additional cost to you, if you choose to click the link and make a qualifying purchase. As an Amazon Associate I earn from qualifying purchases.
Amazon:
Black And Decker WM125 Workmate Portable Workbench On Amazon - amzn.to/412kNFZ
Basic Safety Equipment - Safety Glasses On Amazon - amzn.to/3IDvbfU
Basic Safety Equipment - Nitrile Gloves On Amazon - amzn.to/3J6BUAx
Basic Safety Equipment - N95 Masks On Amazon - amzn.to/41BrTCy
Basic Safety Equipment - Earplugs On Amazon - amzn.to/3kFfj4u
Intro/Outro Music: RKVC - Tropical Thunder
DISCLAIMER PLEASE READ:
For reasons beyond the control of Todd’s Garage there is no guarantee of the information in this video and/or description. Use of the information in this video and/or description is at your own risk. Todd’s Garage recommends the use of proper safety equipment and taking all safety precautions when working with the tools, items, or other things seen or talked about in this video and/or description. The information in this video and/or description does not guarantee a certain result or warranty of any kind, expressed or implied. Under no circumstances shall Todd’s Garage have any liability or responsibility for any injury, damage, or loss of any kind that may result from the use of the tools, items, information, or other things seen or talked about in this video and/or description. Any Injury, damage, or loss of any kind that may result from the use of the tools, items, information, or other things seen or talked about in this video and/or description is the sole responsibility and liability of the user.
Thanks for the video, I was going to buy this table but now I’m not because I’m very very frightened of pinching my hands, you saved me!
Thank you so much I just got my table watching your video is gonna help me set up my table.
Just purchased this. Instructions for putting it together is ok. Appreciate the warnings, pinched my fingers. Should have watched this video before hand. Lol.
just got my wm125 from Amazon tonight. Of course, I had put it together right away. The only problem I had was getting the holes for the drift pins lined up so I could hammer them in place. I would suggest slipping a brad or a thin nail through the pin and the holes to keep things lined up. It worked for me.
Crucial tip. Assembling mine now, Thx!
The drift pins are terrible. They go through the holes of the handle just fine, obviously, but not the holes of the vice screw at all.
I'll try your tip. Not sure if mine are a slight defect or what.
@@tomw.4255I had the same problem. Scratched up my Workmate real good while hammering in the pins but at least I pushed them through
A few too many warnings about crushing your hands. Other than that, good video. Thank you. Menards has them on sale for $9.99. Will be picking some up tomorrow. I've been needing some good horses for awhile and this looks like it will work well.
Oh man, I wish I saw this video when it was published a year ago! You have no idea how hard it is to type this out when your nose itches with one remaining finger!
It’s so incredibly frustrating and I hate B&D for not giving the same warnings. At least it’s my middle finger that remains . I get the satisfaction of waving at B&D employees and they just wave back with no idea
Your video was great and answered a lot of questions. I was hoping to see how sturdy it was and did it wiggle around while in use. Please comment if you can.
Excellent video! Thank you for doing it. Your video is so much easier to follow and it makes so much more sense than the written instructions included with the workbench.
i got a stack of books. this workmate 125, and a circular saw. my goal is to cut the spins off of each of the books so i can turn them into digital files. my question is: what clamping and cutting method with circular saw be the best? using the swivel pegs to hold the book, cult halfway into the books spine, then flip the book and cut the other half of the book spine?
ow, I pinched my hands! Why didn't you warn me??
:')
LMAO
How do you actually cut the piece of wood on it?
Having the same issue as some others I removed the pins that would not go in all the way. I ended up using a screw and a bolt. I didn't like the wobble handles, to solve that I wrapped some electrical tape around the end of the screws before reinstalling the handles.
I have a 19001 type 2.
It doesn't open or fold down like this and it has a 350 pound rating...I use it to climb up to high shelves in my garage.
Good video!
If anyone pinches their fingers with it now, it's completely on them.
My swivel pegs are too big and will not fit in the holes. Anyone else have the same problem? Is it the summer heat?
My orange pegs are so tight thar I cannot move them. One is in the wrong spot. Any tips please?
Hammer them out from the bottom... use a dowel
HD has em on sale for $12 right now
I wish I’d found your videos before assembling, it took me two hours and a lot of swearing, the instructions are the worst I’ve seen to date! Anyways it looks like it should be quite a good bench especially for the price!
did mandark make this video 😅😅 jk
You know the annoying nerdy kid from polar express?
Boring hell