Peugeot 107 Water Leak in Boot, Repair “Seal Rear Lights”
HTML-код
- Опубликовано: 21 окт 2024
- How to repair the leak, no new parts.
A Great alternative to silicone is Boss white, it wont set solid but still repels the water Link on Amazon is £7.99 amzn.to/2QM7uZ0
Good old silicone link,£5 amzn.to/388e0zn
Silicone gun,£5 amzn.to/30od3QM
Citybug
#peugeot 107
#citroen c1
#toyota aygo
My stepdaughters C1 had a boot full of water...I did not have a clue where it was coming from but found your RUclips channel and took the advice as to deal; with this issue, so after a visit to the local hardware store and some silicone purchased I followed your instructions to the letter...and...EUREKA!" Problem solved! thanks a million for imparting your knowledge in an easy to understand manner, Easy to follow for us 'Lay people' Once again thanks aaanton11!
Thanks for the great comments, so happy you fixed the problem 👍🏻👍🏻
I’m going to reseal my C1 by your method tomorrow. Also the vents behind the rear bumper, poor seals there as well. Thank you for very informative films about the city bugs. Really helpful an easy to understand. Great!!!
Glad it helped Thanks for the great comments👍🏻👍🏻🛠
Thank you so much, my local peugeot dealer was going to charge me £300 just for a water check and no repairs. this has saved me ALOT of money! Thanks again! :D
Thanks for the great comments👍🏻👍🏻🛠
Most helpful how to fix water leak out of all the many I've watched
Thanks for the great comments👍🏻👍🏻🛠
Thanks for the best tips. Its kept the water out of my Ford Fiesta, so far so good.
I covered up the other extra holes (who knows what they are for?) with fabric tape and made a new waterproof mat out of garage mat abd vinyl flooring stuck to the back as backing and with a fitted boot mat on top all is great.
Thanks again from downunder 🦘🦘🦘🦘🦘
I have just bought a 107 (06 plate) for my son and noticed this issue- so glad its such a simple fix. Thank you very much for your clear and useful instructions.
Glad it helped, Thanks for the great comments👍🏻👍🏻🛠
Discovered a boot full of water on the wife's car , it doesn't get alot of use but this video has helped a massive amount, job for the weekend, thank you
Its surprising how quickly they can fill up from a small drip, Thanks for the great comments👍🏻👍🏻🛠
This was incredibly helpful, I'm about to about to sell one of these C1s to my mother in law, and thanks to a bit of rain the past couple of days, I realised that re-fitting the top half of the boot seal wasn't enough to solve my leak as the headliner was soaking wet and a puddles had formed in the boot and wheel well (AGAIN)... Thankfully I came across your video, so I sealed up the brake light and the two larger tail lights with clear silicone, so fingers crossed that's solved the problem. Keep up the good work
Well Done Thanks for the great comments👍🏻👍🏻🛠
Excellent mine has got water tracked to boot and along to floor behind front seats !!! Very wet where I live . I will try this at the weekend .
I did it two days ago after watching your video. And I applied a sealant not on the seal on the lamp itself, but on the body car. Adhesion to the metal of the body, I think, will be much better than to the dirty seal of foam rubber. It does not degrease does not work, and rubbed the metal with a degreaser. It turned out well. To speed up the drying warmed with a hair dryer. Now you can remove the lamp and quickly put it back when you need it. I wish you success!
Я сделал это два дня назад после просмотра вашего видео. Причем я наносил герметик не на уплотнитель на самой фаре, а на кузов. Адгезия к металлу кузова я думаю, будет гораздо лучше, чем к грязному уплотнителю из поролона. Ее не обезжирить никак не получится, а металл протер обезжиривателем. Получилось хорошо. Для ускорения высыхания грел феном. Теперь в любой момент можно будет снять фару и быстро поставить обратно. Желаю успехов!
Thanks for the great information, well done 👍🏻👍🏻🚘
Our daughter's car is driving her crazy. Now we know how to fix it. Excellent video!!
Thanks for the great comments👍🏻👍🏻🛠
Oh what a relief. Fed up with mouldy rear seats and having to put towels in the boot!! Garage looked at twice, but wants me to have two new light housing units fitted. :( . Going to give this a go. Thanks so much for a very clear and informative video.
Glad it helped! Thanks for the great comments👍🏻👍🏻🛠
My Aygo had water leaking into the boot but fixed it after doing the same thing but on the top brake light, love the channel, im watching all your repair vids even though my Aygo hasn't got those problems, you never know...
Glad it helped, well done for the repair, Thanks for the great comments👍🏻👍🏻🛠
Thanks for sharing - this could really help me as I have a 106 which is leaking in badly at the back on the passenger side. My husband keeps saying, ' get rid of it' but I love this little car, no tax, low insurance, low on fuel and easy to park. I can get all my cash carry stuff in it if I put seats down. So I will definitely investigate the light fittings - thanks again.
its a part of the family Thanks for the great comments👍🏻👍🏻🛠
Jay Topham - Sorry to say your husband is clueless. Although very inconvenient and extremely annoying. ALL the water ingress points, and there are many. Are easily corrected, fast and best of all cheap to solve... ;-)
Depending on the condition of the original gasket on the rear light cluster.
Most probably don't need any other intervention, other than clean (wash) it, make it supple again (heat) and that's it, done! Keep the silicone sealant only for the top brake light. ;-)
Remove light cluster wash/clean the gasket and respective mating surface on the car body. Make sure to remove all the dirt, dust and grime.
Now the fun part. Hit it with a air drier, heat gun, whatever is more handy. So the rubber gasket get slightly more supple. After that apply some silicone spray (liquid), for lubrication, not to "glue" it in place. Assemble it all back together and enjoy! It's that simple, cheap and easy!
BTW this also work a treat for refrigerator & freezer door gasket and such. It's the same principle warm up the gasket. So it expand to it's original shape and form and you're back in businesses!
Definitely there's no need to "glue" it with silicone. ;-)
It's faster than writing all this! LOL 😂
WOW videos are great watched them all as the saying goes you learn something new everyday just done what you said in the video, to be on the safe side what did i find drivers side wet, SO A BIG THANKS FOR ALL YOUR HELP AND VIDEOS and better still the money you have saved me not sending the car to the garage.
Glad you like them! Thanks Daz for the great comments👍🏻👍🏻🛠
Thank you very much for your helpful video. I had water in the boot and damp rear seats. I have siliconed my rear light seals and just waiting for the silicone to set. No surprises thanks to your handy video . Merry Christmas.
hope you have a fantastic Christmas too, Thanks for the great comments👍🏻👍🏻🛠
Aha..... guess what we'll be doing at the weekend!!! Been scratching our heads to work out where it might be coming in from! Cos we never use the back seats we hadn't even noticed how much water they'd soaked up from the boot until we needed to carry a passenger... then the investigations began... boot was soaking!!! Annnnd now I know why my windows were always running on the inside!! Sealant purchased and we'll be doing this at the weekend! Thanks for such an informative video... I'm confident this will solve my problems!!!😁
good luck and Thanks for the great comments👍🏻👍🏻🛠
Thank you from France for this very useful video ! :)
Glad it was helpful! Thanks for the great comments👍🏻👍🏻🛠
Glad I found your video as just been quoted £900 by the dealer to fix the exact same issue.
Thats a bit steep😳, Thanks for the great comments👍🏻👍🏻🛠
This dealer should go to prison for that!
i fixed the leak problem 😃 ! very helpfully your video! Thanks a lot ! 🙏
Glad it helped! Thanks for the great comments👍🏻👍🏻🛠
You could also make new seals , for the lights, with denser foam and glue it on. Use the old seals to cut to shape. Good video as these cars are prone to leaks at the back .
Yes I like that idea, as it will be awkward to remove the lamp units now they are silicones in. But they don’t leak anymore 👍🏻👍🏻😃
Very helpful, I have exactly the same problem on my daughter's car and this should help sort the problem out without breaking the bank.
Glad it helped Thanks for the great comments👍🏻👍🏻🛠
Magic👍🏻 I’m just about to buy a c1 and know what to look for now 👍🏻
I'm currently having the same issue with my 107, so I will be doing this tomorrow. Thank you for this video, very easy to follow.
Glad it helped, Thanks for the great comments👍🏻👍🏻🛠
How did you get on?
I just got an 107 today, I find the video very helpful..
Great cars, thanks for the comments Barry 👍🏻👍🏻
Brilliant video thank you and just frustrating you have to go to this trouble for this car in the first place. Very clear instructions and really appreciated.
Glad it helped, Thanks for the great comments👍🏻👍🏻🛠
Great video tip to solve the water leakage. I think another alternative to silicon sealer would be to use Plumbers Mait it would also work great to seal the lights from water leaking in and its a proper water repellent sealing compound and the bonus it doesn't set so the light lens can be removed for changing the bulbs without it being glued down by the silicon method to the car 👍
Great tip!, I think there is a link in the description to some, Thanks for the great comments👍🏻👍🏻🛠
@@aaanton11 Hi 02:20 - 10mm bolts Peugeot 107 Rear Lights where can I buy them. Link please.
Good video, think I’d have changed the bulbs while it was out though. Caravan dealers sell non setting mastic sealant in tubes or rolls, it would be perfect for this job !
That would work great, thanks for the great information 👍🏻👍🏻🛠
Just ordered some SOUDAL - BUTYRUB NON-SETTING MASTIC
Thanks for pointing me in the right direction
Great video, thanks. I've had a leak recently and was struggling to find the exact cause. This video was easy to understand and I'll get on the case of repairing it
Thanks for the great comments👍🏻👍🏻🛠
My Wife has had her C1 from new within 8 months she was complaining that the car was steaming up and felt a bit damp, it was mentioned to the dealers but they said they couldn’t find anything wrong and told her to use the heater more often. A month or two on and after a heavy rain storm the boot floor was soaking wet. Back to the dealers and it was fixed under warranty, problem was the high level brake light gasket had failed the water comes in on the left hand side (near side) all the way down behind the head lining and trim arriving onto the boot floor under the carpet. Easy to miss in the early stages as small amounts are soaked and dispersed in the carpet. Today six years on, water in the car again, the boot carpet soaked but this time the parcel shelf was also soaking wet. I thought I’d investigate myself, took the carpet and parcel shelf out, dried them in the house, folded the back seats down shut the tail glass and ran a hose pipe over the roof . Watching from inside the car I could see the water getting past the main rubber seal at the top which explains it getting as high as the parcel shelf, there was also a smaller amount getting in through the push button assembly at the bottom and onto the boot floor and a tiny bit coming in from that high level brake light again.
From the outside with the tail glass up, a few conifer leaves stuck to the rubber between the glass when closed was all it needed to allow the water to get in . Dirt around the rubber also slowing down the flow, how did the designers think this was going to work,the rubber uses all the metal seam so effectively blocking the water channel you would see on other cars. After a very detailed clean I have this working but will need to keep on top of this to keep the rain out. I checked out the light clusters as per vides but they seamed ok, the high level brake light that had been replaced by the dealers is stuck to the car so I can’t get it off without damaging it, looks like some sort of black windscreen glue so they mustn’t have been happy with just fitting just the original gasket. As it’s just a tiny leak in this I will pipe in tiny amount of silicone,masking off the car, hope we don’t need to change a bulb but if we ever do the fitting is a goner anyway due to the dealers glue.
Thanks for your information we still like the car and will persevere.
Thanks viv for the super detailed information, this is a great comment with loads of great content that will no doubt help someone solve water ingress problems 👍🏻👍🏻🚘
Mine was supposedly fixed on a recall. It's now worse than it was before they "fixed" it. Going to do it myself using your method. Cheers mate
Thanks for the great comments👍🏻👍🏻🛠
Nice video (again!). Noticed today my daughter's C1 right rear light cluster has about 2" of water collected, probably after the monsoon we had on Friday! Left hand carpet a bit wet too so will follow your steps to cure both issues.
Fantastic, Thanks for the great comments👍🏻👍🏻🛠
Excellent video. Thank you so much. My 107 needed this badly as it was leaking from all 3 lights!!!
Glad it helped Thanks for the great comments👍🏻👍🏻🛠
Wow! I never thought of that. I was looking in the wrong place. Thank you so much. Merry Cristmas.
merry Christmas to you too, Thanks for the great comments👍🏻👍🏻🛠
On a Peugeot 308, I applied silicone to the foam light seals and those on the air vents under the rear bumper, but still water getting in. Also, need to look at leaks around the front windscreen / wiper scuttle. The car is a nightmare for keeping dry and full of crap body finishing.
Maybe the boot seals are a bit squashed, Thanks for the great comments👍🏻👍🏻🛠
Thanks, had this problem with my friend's 107 and fixed it with help from this video. Garage (official Peugot dealer) said they had to replace the rear light assembly completely... Nope.
Thanks for the great comments, good job 👍🏻 👍🏻
Thanks for sharing, I will attempt this on my car as I am having the same issue.
Good luck! Thanks for the great comments👍🏻👍🏻🛠
I had to go through this twice, finally it worked out fine. Thanks!
Thanks for the great comments👍🏻👍🏻🛠
Grande Punto 2008 similar design with sponge. Used clear silicone. Much better but still a little trickle down the side but minimal really to what it was like before. Went to take the light off the sponge stuck to the car! Glued it back on the light back and reapplied silicone. I may try the White plumbers paste you mention in the Focus video if it persists.
Thanks for sharing! & Thanks for the great information👍🏻👍🏻🛠
The space for the spare wheel was full of water on my C1 when i bought it, i newer got it fixed during the months i owned it. Just drained it with the plugs mentioned in the video. Found a 2008 107 with only 24000 km on the odometer instead and i will definitely seal my car up before i get an issue with water. Saw an other channel where they put another foam gasket on the metal side so there was foam against foam when the light was reassembled.
Thanks for the great information, sounds like a good idea👍🏻👍🏻
Thanks for the video....I was thinking it may be the tailgate rubber seal but now I shall have a look towards the lights
Thanks for the great comments👍🏻👍🏻🛠
Great information. That was very useful and a great test afterwards with the pressure washer.
Thanks for the great comments👍🏻👍🏻🛠
thank you mate that leak was doing my head in !
Sarah Hughes I know right
Seal it up tight😂thanks for watching 👍🏻👍🏻
Great tips and techniques - thank you.
Glad it was helpful! Thanks for the great comments👍🏻👍🏻🛠
Great video , thanks. I sealed the foam behind the light clusters some time ago and it wasn't a complete success. I've done the top brake light as well though I'm not sure that was necessary. With our car I think the culprits are the air vents behind the bumper. The seals were pathetic and water running down past the light cluster will run round and under the rear window then pass down and should go around the air vents but I reckon in our case it was getting in there.
Great information, hopefully you have sorted it out now, thanks for the great comments 👍🏻👍🏻
Safety recall- I watched the video yesterday and was all set to give it a go and then today I received a letter saying there was a safety recall- to do with the hinges on the back window not being correct and could be letting in water,vibrating and a possibility of the window coming free. So it's being booked in to put right .
Thats one of the issues sorted, the lights are always favourite for leaks, Thanks for the great comments👍🏻👍🏻🛠
Thanks for this video,I have the same problem as you ,so I`m going to have a bash at it myself.I recently changed my front break pads and discs thanks to your other video and the car just sailed through its M.O.T. Keep up the great work!
Glad you are getting the jobs done, these comments make it all worth while, thank you 😊👍🏻👍🏻🛠
Brilliant. This pushed me to try and sort the leaking car out. Thanks
Thanks for the great comments👍🏻👍🏻🛠
Top class videos on this stuff!
Glad you like them! Thanks Liam for the great comments👍🏻👍🏻🛠
My wife's Citroen C1 has the same issues and I suspected water was getting in through the light clusters. I'll give your fix a try tomorrow! Cheers!
Thanks for the great comments👍🏻👍🏻🛠
Could I ask if the back seat got wet also? My wife's 107 boot is soaked but also back seat.
@@paulh1860 Not "wet" per se, but damp to the touch. I guess it depends on which way the water leaks through? The seat belt was also soaked when pulled through because it retracts into the area where the leak is.
I've completed the fix, but also put a dehumidifier in the car for almost a whole day to help dry things out - I was getting horrendous condensation all through the car, which may also be the cause of your wet seat?
@@andyvaisey I'm going to have a look tomorrow but my wife said roof lining was wet, think it might be high intensity brake light. Might try the dehumidifier too, it's never going to dry in this weather
@@paulh1860 I think the leak on my wife's car was the off-side rear light cluster, but I sealed *all* the rear lights just in case.
The roof lining wasn't wet, but was starting to grow spots of mould, probably due to the condensation caused by the swimming pool in the spare wheel well.
The dehumidifier worked wonders, but I still want to do another day with it just to be sure - I pulled the boot carpet out and that is drying naturally in the shed.
This has just happened on the Mrs car, we thought it was because of the recall last year, where they replaced the window and seals in the rear, just rung the garage up and they mentioned the seal around the rear light, its mainly on the passenger side on the rear, but thanks for this i will seal them all over the weekend and that should do the trick.
This is usually the issue, Thanks for the great comments👍🏻👍🏻🛠
I really want to fix the leak in my Aygo, but if using silicone, what happens when it is time to change the light bulbs? How will I remove the headlight? (will it not be stuck to the metal?)
Thank you for the help!
it will be more difficult to remove, but the foam will tear if you push it hard enough, you can use other sealants like plumbers boss white which will not bond completely, Thanks for the great comments👍🏻👍🏻🛠
@@aaanton11 thank you for taking the time to reply!! will give it a try... 👩🔧
wishing you a happy 2020!
Thanks for the video. Is it possible that this problem would also cause the water to run into the main cabin? I'm seeing it in the footwell of the rear seats and by the sides of the front seats...
Yes it will always make its way to the front, Thanks for the great comments👍🏻👍🏻🛠
how exciting it is to have car knowledge! If l had been a man l would have trained in car repair
Its never too late to learn, thats what RUclips is for, Thanks for the great comments👍🏻👍🏻🛠
Thanks for the vids,I’m subscribing - your content is brilliant and I’ve passed on links to them.
Thanks Bob for the great comments👍🏻👍🏻🛠
aaanton11 I’m a Toyota AYGO and Peugeot 107 owner-both 2007-i know nothing about cars, these vids have been invaluable👍🏼
Great video which I will follow and apply on the wife's C1 but we also have water inside the car mainly on the passenger side rear, the carpet is soaking so would the water getting in the boot be working its way into the car as well do you think ?
quite possible, the door seals also can give issues I have another video on that, Link is ruclips.net/video/lLLkCjrHn_E/видео.html Thanks for the great comments👍🏻👍🏻🛠
Brilliant video, can you not buy a separate seal,?
Will anyone DIY silicone work?
Yes works like a charm, Thanks for the great comments👍🏻👍🏻🛠
Such a common issue, oddly they never bothered to correct it with better seals. Other cars have the same design flaw. Thanks for sharing, doing this fix right now on our C1, as the in car swimming pool is no longer needed.
😂, Thanks for the great comments👍🏻👍🏻🛠
Out of interest, did you get the "swimming pool" getting into the main floor of the car too? We have this but not convinced it's just the rear lights that the leak is coming from...
@@Rg-xi3lk yes there is a door seal that simply glues to the inside of the top of the doors. Its sold for the Toyota version but apparently not for the Peugeot or Citroen version of the car. We only found this out under warranty as the dealership also owned the Toyota one next door. They were only a few quid each. But have saved having to have the carpet replaced as was the case prior to fitment. Just about to do the same set of fixes to my mothers 107 which she bought because she thought it was nice.
@@pkf4124 thanks! Easy to do then?
@@Rg-xi3lk yes they are a rubber flexible strip that just sticks on with the sticky film on one side. Ours have stayed on for years now and quite a few goes through the car wash machines at several garages. Also worth mentioning is there are two breather ports behind the rear bumper that are very poorly attached and removal of the bumper and a good reseal of these prevents water getting in. I just mastic them in with exterior sealant, then pop the bumper back on. Takes 20 mins or so to do.
Hi there Would spraying silicon spray over the seals work to repel the water / or sticking some self adhesive sponge seal on top of the existing one ? Many thanks 🙂
Yes it will Thanks for the great comments👍🏻👍🏻🛠
aysun ay
Hello. Thank you for the video. Could you please tell what time of seal you use..? Water proof or another time, if you can give an example of make please do that I can look for it as I have no clue..? Thank you
Thanks for the great comments I use silicone sealant 👍🏻👍🏻
Thanks for the video. I've been looking at the Peugeot 107 / Citroen C1 as a little cheap runaround. WAWAW
Great little cars Thanks for the great comments👍🏻👍🏻🛠
Spot on iam gonna try that on my i20 today,looks easy enough to do.
Got a small puddle on mine..
Thanks for the great comments👍🏻👍🏻🛠
Thank you. This helps me. Having the same issue with water getting in.
Thanks for the great comments👍🏻👍🏻🛠
Hey good explained video. But... Did it solve the problem? Or did you also have to reseal the vents behind the rear bumper? Best regards from Germany
I have not needed to do the vents, Thanks for the great comments👍🏻👍🏻🛠
So not the actually seal needs replacing.. just a bit of silicone on those areas should sort it you think?
Definitely, Thanks for the great comments👍🏻👍🏻🛠
id use butilic mastic the kind you use under the kitchen/or for sealing headlights (the one in a roll) its flexible and creates a water seal , yet if you pry its easy to take off in the future
Thanks for the great information👍🏻👍🏻🛠
Hi there thanks for video 🙂because of the leak in the boot my back seat bench is damp do you have a video on how to remove so I can dry it out many thanks Pauline
Not yet!, but i will look into making one Thanks for the great comments👍🏻👍🏻🛠
Nice .. so when putting the silicone layer on the rear light sponge seal ... should i wait until become a layer or i can directly reinstall the rear light instantly ?
just seal it and reinstall, Thanks for the great comments👍🏻👍🏻🛠
Just curious as im thinking of buying the later series 3 AYGO after 2015. Do they suffer from the same leaks and are they a better car all round ? thanks
They have sorted most of the water issues, saying that they are all the aygos are fantastic you cant go wrong, Thanks for the great comments👍🏻👍🏻🛠
Nice job, going to sort mine tomorrow 👍
Good luck! Thanks for the great comments👍🏻👍🏻🛠
Really helpfull! Exact same car, exact same problem here! Thank you ever so much!!!
Thanks for the great comments👍🏻👍🏻🛠
@@aaanton11 Mind as well tell you, in my case, i also had water on the roof, the third brake light was leaking all over!
i love your vids! i've noticed this on mine yesterday! thanks so much for what you do! MERRY XMAS TO YOU AND THE FAMILY
thanks lee, and a merry Christmas to you,Thanks for the great comments👍🏻👍🏻🛠
My Toyota Aygo which is a similar design has the same problem, I never understand why they don't actually put a rubber seal between the chassis and actual light? Anyway your video is very helpful. Many thanks.
Great point! Thanks for the great comments👍🏻👍🏻🛠
Hey... thanks for this... great. I've a Toyota Aygo... daughter was running it and kept saying for a long time that it seemed misty inside. Having just checked it out I found a good inch of water in the tyre well. I'm gonna do as you have.... but with plumbers Boss White jointing compound. It's like a maliable putty... ... that way it's easier come new bulb time. I'll see how it goes... if all else fails... bring out the silicone. 😊👍 Thanks again.
Also.... finding out from other vids... that top stop light above tailgate is highly common leak point. Little gasket on it just wastes away.
Great idea, that stuff is awesome, thanks for the great comments 👍🏻👍🏻🛠
Thanks for the great comments 👍🏻👍🏻🛠
I’ve got the FlexSeal ready to tackle those 2005 Buick LaCrosse tail lights! Thanks (and I’ll check sunroof drain tubes while I’m at it)!
Good luck, thanks for the great comments 👍🏻👍🏻🛠
I've got a leak have the spare wheel well slowly filling nothing major ...but the rear passenger footwell had inches deep water after all the rain and snow ....car is parked on an upwards facing incline so doubt it's a rear light issue any other ideas at all ??? 👍...it's a 5 door 05 107 btw
Try this ruclips.net/video/lLLkCjrHn_E/видео.html
, or ruclips.net/video/EOVTngkiA0U/видео.html
Thanks for the great comments👍🏻👍🏻🛠
Hi mate.. Thanks for the video.. I have a question for you. Do u let the silicone dry before you screw it back on? Or do u let it stick to the metal?
Put the lamps back in before it drys, thanks for watching 👍🏻👍🏻
Cheers for this. I'm hoping it will solve a similar problem with my Fiesta Zetec S.
Thanks for the great comments👍🏻👍🏻🛠
Sorry for all the questions.. should I use a silicone lubricant before applying
Just use silicone sealant, Thanks for the great comments👍🏻👍🏻🛠
good morning, i followed your interesting interventions on peugout 107 and i would like to ask you how to repair srs air bag spy exploded steering wheel and seat belt pretension store i would be very grateful to help me to visualize the sensor and the cable behind the front bumper thank you very much
I will add it to the list of to do videos, Thanks for the great comments👍🏻👍🏻🛠
Good informative video. I am going to give it go. Thanks 👍
Hope you enjoy Thanks for the great comments👍🏻👍🏻🛠
Thnx for the video, helped me out a lot
Glad it helped Thanks for the great comments👍🏻👍🏻🛠
@@aaanton11 i fixed it yesterday, the car is completely dry now thanks to you!
Thanks man, I`m going to try this on my 107.
Good luck! Thanks for the great comments👍🏻👍🏻🛠
Instead of silicone would the self adhesive foam strips work just as well or do you think the silicone is the better option?
in the description I have added a link to boss white, which works really well, Thanks for the great comments👍🏻👍🏻🛠
@@aaanton11 great Thank you, total novice trying to fix my daughters car so this is really helpful! I suspect there's a leak from the car antenna/ aerial too, can i use the boss white to seal that also?
I have owned my Aygo for 12 years and chased this leak, it got worse with age,
I found that the leak got worse when snow was on the roof, a clue,
I found the high level brake light, the oval one above the rear window was at fault,
If you look closely at the top of the light and the area it seals against, you can see a gap where the foam seal has shrunk and would allow a large amount of water in behind the roof liner,
Either the red plastic of the lens warps over time or the foam seal shrinks due to UV,
I took it out cleaned both sides put masking tape around the light and put a bead around where the light would sit,
Just the top half of the light should be enough as water normally doesn't travel upwards,
I then lightly screwed the lens in position and used a lolly pop stick to profile the silicone,
Then when it dried i could do it up to "squish" the sealant for a better seal,
When i bought my car in 2009 i knew about the reported leaks,
It was not clear where the leak were coming from, but that high level brake light looks like it was the reason, on Aygo at least,
The Pug, and Citroen have the same high level light,
It would also make it look like the rear lights were leaking as the water would flow past the rear of the light clusters to make it look like that was the fault,
Great video as always, hope this helps someone as left it will start to send your rear seat and seat belts mouldy,
I also pulled off the sodden recycled fabric off the back of the boot carpet and threw it away.
Wow Thanks for the great information👍🏻👍🏻🛠
Just found this video, wife's car has the same problem, is this still working did it leak after this ? will try with the wife's care now thanks.
Leak sorted no more issues, Thanks for the great comments👍🏻👍🏻🛠
another method instead of silicon would be a good thick spread of grease around the seal surfaces, that way it is still easy to disassemble to replace bulbs, great vid btw.
Great tip! I like the boss white plumbers mate, link is in the description, that also works well, Thanks for the great information👍🏻👍🏻🛠
Nice. They all got the same problem ^^
I just removed my 3rd breaking light and just put some duct tape over the hole. Then left the car outside for 2-3 rainy days and checked every day the boot for water incoming. It was pretty dry, so i think main problem is the 3rd light and the others are just the "bonus".
Also i saw on the 3rd light, that it is pretty much pressed on left and right, where the screws are, but got a little, just a tiny, hole on the mid section.
But i'm stil aware of "glueing" the light to the car, as you need to remoe it every time a lamp is broken.
I'm still working on a nice solution for this.
Thanks for watching, That was one reason I only siliconed the top edge of the 3rd brake light I can just use a blade to cut the seal to remove, the light units will be more difficult to remove, but I like a challenge 👍🏻👍🏻
We used the silicone and hoping it works . In the right side though we put the white plug back but now the lights work but the indicator doesn’t??? On one side it looked rusty on one of the top holes in the plug- how can we replace it to get the indicator working again. The bulb is intact.
Thanks
Remove the light unit before it cures, there must be a issue with the connection or the bulb👍🏻👍🏻🛠
aaanton11
The bulb looks intact - but I saw another video of yours with puckering to the filament and a slightly darker glass so when it stops raining here in Wales we will have another look and sadly have to silicone again. The dash is blinking fast like it should be the bulb - which is why I am thinking I’m going a bit dippy.
Very informative video thankyou
Glad it was helpful! Thanks for the great comments 👍🏻👍🏻🛠
Great video. My mrs 107 is wet through so will give this a try. UTO!
Thanks for the great comments👍🏻👍🏻🛠
you know what kind of silicone do you use for the lamps?
A Great alternative to silicone is Boss white, it wont set solid but still repels the water Link on Amazon is £7.99 amzn.to/2QM7uZ0
Good old silicone link,£5 amzn.to/388e0zn
Silicone gun,£5 amzn.to/30od3QM
Thanks for the great comments👍🏻👍🏻🛠
I would've put a smear of Vaseline on the body part (or grease). The silicone would set and take up the shape but when set, it wouldn't stick to the body and tear the foam.
Yes that's an option, or just wipe with a damp rag, Thanks for the great information👍🏻👍🏻🛠
I used gasket on a tube. it dont stick as hard as silicone, pro tip right there :). but the foam looked so "dodgy" that i covered them all over withe gasket on a tube. i still got a tiny leak but that becouse one skrev does not work, maybe a bigger one can grip the damaged plastic hole? as you propably guessed my native lanuguige is not english.
Thanks for the great information👍🏻👍🏻🛠
How do you change the back lights when is glued down ? Could you not get a new seal are is that to easy
you can still remove the lights with a good push the sponge seal just comes away, Thanks for the great comments👍🏻👍🏻🛠
While you're on with it, they leak from eye level brake light and the boot vents under the bumper.
Thanks for the great information👍🏻👍🏻🛠
Is so much cheaper just to buy a replacement foam and replace it. Is a standar air polyurethane foam with 12 mm thickness and cut by size. However I am interested if there is any othe cause of this happening on a Barlingo B9...
It happens to many different models, Thanks for the great comments👍🏻👍🏻🛠
The idea is correct, but you can do better. Silicone should be allowed to dry, then collect back. Even dried silicone will be elastic and resilient. And the next time you replace the lamp, it will be possible to remove and reassemble it without problems. I'm going to do it that way. If you immediately glue after you smeared with silicone, then it will be impossible to unglue. Or, most likely, you will remove the lamp (lantern) and the native seal will break. And each time you have to smear with silicone again. Good luck!
Идея правильная, но можно сделать лучше. Силикону надо дать высохнуть, только затем собирать обратно. Даже высохший силикон будет упругий и эластичный. И при следующей замене лампы можно будет снять и обратно собрать без проблем. Я собираюсь это сделать именно так. Если сразу приклеить после того, как ты намазал силиконом, то потом отклеить будет невозможно. Либо, скорее всего, ты снимешь лампу (фонарь) и родной уплотнитель порвется. И каждый раз придется мазать силиконом заново.Удачи!
Thanks for your ideas, great comments 👍🏻👍🏻
Thanks going to try this
just wondered if letting the silicone dry up would still work? then put the light back would avoid the whole ripping of the foam then
I don't think you would get the light back in, unless it was a very thin layer Thanks for the great comments👍🏻👍🏻🛠
I am trying to replace the bolt on the light as just realised I am missing the bottom one any ideas what size I need and we're to get in from ? Sorry usless with cars
there will be one in here to fit amzn.to/3fUZykB
Thanks for the great comments👍🏻👍🏻🛠
Will it also work if I let the silicon dry first? So I can remove the parts easily afterwards.
No the light unit wont go back in, I have used plumbers mate
,£8 Link to Amazon shop, amzn.to/398ezZZ
I show in this video ruclips.net/video/BequeigXqdc/видео.html
Thanks for the great comments👍🏻👍🏻🛠
Hi
Are you able to give any advice on how to fix leaking rear door windows on a 5door Citroen c1
Water seems to be working it’s way around the door seal frame
check out my video on leaking door seals, the principles are the same for the front and rear doors, Thanks for the great comments👍🏻👍🏻🛠
Well explained Bud.
Thanks for the great comments👍🏻👍🏻🛠