Turbo Charger HOT Side Boost Pipe! Silverado Duramax 6.6 L5p
HTML-код
- Опубликовано: 17 окт 2024
- Looking for Banks Power Performance Products? Use my link HERE! www.bankspower...
In this video we're performing some upgrades to the engine air intake and turbo piping on a 2020 Chevrolet Silverado 3500 SRW with the 6.6 Duramax Turbo Diesel. The customer has supplied us with a Banks Power intake with extra large filter as well as a Banks turbo pipe kit for the L5P Duramax. The turbo pipes are a larger diameter than the stock components and the turbo air inlet horn and Banks air filters massive size will reduce air restriction to the compressor inlet. In upcoming videos we install a Banks Ram air rear diff cover with Amsoil lubricant a Banks Power DPF back exhaust. Next will be a Banks iDash and Derringer Tuner, with Pedal Monster
Support the Channel with a Like and Subscribe!
Become a Channel Member or visit Patreon at / rainmanraysrepairs
Visit our Second Channel on RUclips, RainmanRay Off Duty / rainmanrayoutoftheshop
Follow on Twitter: @RainmanRay4Real
TikTok: www.tiktok.com/@rainman_rays_repairs
Located in Florida? Need work done?? Visit www.RainmanRaysRepairs.com
Check out my Merchandise shop for Men's and Women's Apparel, MUGS and Stickers! rainmanraysrep...
Support the channel on Patreon: / rainmanraysrepairs
Patreon is a "Tip Jar"
1: Milwaukee 2554-20 M12 FUEL 3/8 in. Stubby Impact Wrench - Bare Tool amzn.to/3Zkilv1
2: Milwaukee's Cut-Off Tool,12V, Bare Tool amzn.to/46fuVht
3: Mountain 5-Piece Metric Double Box Universal Spline Reversible Ratcheting Wrench Set; 8 mm - 18mm, 90 Tooth Design, Long, Flexible, Reversible; MTNRM6 amzn.to/3OJTRp2
My Camera Gear:
Gopro Hero 10 amzn.to/3AaxELe
Hero 9&10 Dual Battery Charger MUST HAVE! amzn.to/3g5KdAT
Flexible Camera Mount amzn.to/3Jywrk5
#brakecleanmafia #wifeunit #rainman #comnissionearned #mechanic #technician #dealer #independent #autorepair
As an Amazon Associate I earn from qualifying purchases.
Also, I personally use or have used the products featured in my links and only recommended them if I feel they are of good quality.
”Intro Music by Karl Casey @ White Bat Audio”
Thanks to Jesse for making the intro and graphic for us to enjoy!!!
“All the videos, songs, images, and graphics used in the video belong to their respective owners and I or this channel does not claim any right over them.
Copyright Disclaimer under section 107 of the Copyright Act of 1976, allowance is made for “fair use” for purposes such as criticism, comment, news reporting, teaching, scholarship, education and research. Fair use is a use permitted by copyright statute that might otherwise be infringing.”
Customer Customer States Mechanic Fails Engine Transmission Gas Diesel off road race 4x4 street car daily driver scam dealership dealer technician how to
Looking for Banks Power Performance Products? Use my link HERE! www.bankspower.com/RAY
I went back to see some of Ray’s earlier videos, before he went self employed, Ray seems to be much happier now than before despite having more responsibilities. Ray has landed on his feet with owning his own business.
Amen God is good 😊❤🕊️✝️
He's growing up fast he has 3 employees now.
True, true!
no@@SoY_7 he is a vengeful hateful POS
He has much more responsibilities, but now he has his wife working with him. He is able to make better decisions for his customers and his business.
Hey Dr Ray,
During your absence yesterday, I watched a video of yours from about a year and half ago😢, Nissan pickup, your sense of enthusiasm was very dismal in fact sad. Could actually hear the displeasure in your voice...not in your happy place.
Now in your own shop, the resonances of displeasure no longer exists, being your own boss, working at your own place I feel makes you a very happy camper/entrepreneur/mechanic. Your laughing is a clear indication that you are indeed happy. Having fun at work is what it's all about, that and taking care of your family. Keep up the great work Dr Ray.
Ray, I’ve been stuck in the hospital for over a week with COVID and pneumonia. Watching you is not only educational and fun, but your optimism and humor is really helping me get through this.
Hope you feel better soon
Hope you get better
Prayers for a quick and complete recovery! Hang in there, you got this!!
I hope you get well soon, keep fighting and positive thoughts.
Feel better soon
I kown Banks offers installation at their shop. Ray would make a great factory authorized installer on the east coast.
A new drinking game is in the works for this series of videos.....every-time Ray says....BANKS.....take a sip of your beverage
I was drunk before I got home 🤣🤣🤣🤣🤣🤣
@@RainmanRaysRepairs I said beverage, coffee is a beverage, along with your juice boxes.
Dude, you don't have to apologize for not feeling well! We are lucky to get whatever you feel like putting out!
Always amazes me that people have an opinion about things and are militant about things that they will never purchase or have interest in, but they will spend an inordinate amount of time trying to play down. Who cares if this guy wants 24 carat gold intake and exhaust pipes? It's his money to spend how he sees fit. Keep up the good work Ray.
Especially those who say "you don't need that". I don't need anyone telling me what I need or not. 99% of the time it's something I want.
He should chrome the fan belt to make it nice and shiny 😂
Banks actively developing the golden belt suggestion.@@johnt.848
😂@@johnt.848
I do agree with you, it is their money to spend how they want. But these larger pipes are the equivalent of cutting your garden hose in half, splicing them back together with a 5 foot section of fire truck hose, and expecting more flow out of your sprinkler.
That being said, the larger pipes would be beneficial if the turbo and intercooler were also upgraded. Maybe the owner has future plans to do just that?
Nice to see you feeling better. That's a nice system going on this truck. Nothing wrong with more power! Have a good one Ray!
“The best way to make a small fortune owning a business?
Start with a large one!”
Congrats Ray on your success.
We missed you yesterday.
Kinda like, the best way to make a million in farming, start with 2 million!
Hey Ray, I look forward to every episode. All I can say is it’s a good thing you don’t have a live camera up in the corner of your shop that streams all day because I’d never get anything of my own done. Being a retired mechanic it’s very enjoyable watching a professional get the jobs in and out. Keep up the great content. And don’t give the naysayers the time of day you’ll never please them no matter what!
You and I are old enough to remember a song by Ricky Nelson with the refrain, "you can't please everyone so you have to please yourself". I imagine one has to give a dose of lemon one day, lime the next, then orange another. In the end the blend makes any fair
minded individual satisfied. "Satisfied" is what makes everyone smile and not frown. Too many expect satisfied to be "happy" all the time. "Satisfied" has an element of understanding that makes life good. Some are good at it and some just want it all. Ray has to do Ray and let the jerks be jerks.
@@larrybe2900 Garden Party lol
Good day Ray! I hope you’re feeling better! You should become the official authorized Banks ‘shop’ for these mods. Between you and Aaron, trucks would be the coolest on the road. Great videos. Doodlie dooos!
The good thing banks does is there testing not only are you increasing the diameter of the piping by going up a inch but you are also removing the rubber hot side pipe that expands under pressure which gives some lag to the turbo I noticed a improvement when I did the hard pipe setup on my old 95 eclipse gst the turbo response gets better and if the owner ever wants to up the pressure he will have less of a chance to rupture that hose. And the tuner is needed do to difference in intake pipe size as well as intercooler size so it doesn't create a lean out condition
Me to with Covid. Been a ruff week but coming out on the other side. Funny how I like to start my day with a guy with a positive attitude who gets thing done off the checklist. The only problem it feels like I got some things done when actually I’m sitting on my butt drinking hot coffee enjoying myself. Blessings to you Mr. Ray and family. You will go far! On a another note your teaching the young employees the CORRECT way to be a worker. So so important
Banks does a lot of actual testing. If those who don’t understand or have doubt, on the banks channel, they have so many videos that go in-depth explaining the benefits but more importantly, they provide actual real test results. They use all manner of testing equipment to validate the results. This is being done to allow the engine to breath better. Anytime a human breathes through a straw, the bigger the straw, the better a person can breathe. It’s the same for the trucks heart.
Good to see you feeling better. I like the look of the banks air system it sounds awesome. There is no problem with more horsepower. I really enjoy watching your channel and content.
Just ordered a Banks boost tube kit for my '20 Duramax so this was very timely! There are literally NO videos on YTube showing an install on a '20 and this was appreciated. This is the last element to my Banks upgrades as I've done the Ram Air, rear diff, monster exhaust, derringer and pedal monster already and all have not disappointed! I do regret however that your discount code came 2 days too late! Thanks, Ray!!
How much have you spent on Banks?!
@@ErikssonTord_2 welllll.... it's been a chunk. But don't regret it at all.
👍 Good stuff. Code came 2 days too late for me too. I just started my journey down the Banks road for my 2024 on Sunday. I only ordered an I dash but i needed to start somewhere....
Get the Pedal Monster next, you will love it with with the iDash
@@RainmanRaysRepairs 😀 I was thinking about the diff cover as well since i will be towing heavy a lot in the very near future.
I saw some videos where people were having problems with the two piece tube blowing apart .. I always wipe the surface where boots connect, with acetone to make sure they are absolutely clean and oil free. I have the complete system on my 6.0 liter power stroke, intake, intercooler, boost pipes exhaust and diff cover. I don’t run any tune and have picked up performance and mileage with these products
Hey Ray, glad to see you back on deck, knew that you must really be under the weather when there was no upload yesterday. Great to see this Banks project continue!
Thank you Ray I made a Banks purchase and it was within the first 25 people to order after this video I got a 15% discount. You rock keep the good videos coming.
Always nice to see Lauren.
He deserves every bit of that. He honest like that 😊.
And has a beautiful wife to support him.
Ray, that 2018 looks like it might be an AFM lifter failure, super common on these. They run really rough when that happens and will shake a lot and be really loud. Sometimes the lifters rotate and the roller which can no longer rotate just hammers the cam. You can check it easily enough without pulling the engine, just pop the valve covers off, the offending lifter will be real easy to spot where the very loose rocker arm is and a possibly busted valve spring and bent push rod.... I bet if its a lifter its on 1 or 7..... Is every idiot light in the history of idiot lights lit on that dash too?
These engines are not known for bottom end issues and a spun bearing i would expect some sort of glitter in the oil. I would be quite surprised if it was a bottom end failure of any kind.
If it is the AFM lifter not only will the lifter be toast the cam will be wiped out and need to be replaced GM also recommends replacing the VLOM as well. My suggestion as someone that has owned 3 of these disasters. Put in a Texas speed delete kit and get rid of that AFM crap entirely. Since this truck has been modded already i bet this customer would love a hotter aftermarket cam too.... Money wise its about the same as factory parts but the engine will be so much more reliable long term.
Sounds alot like a slipping A/C compressor clutch too.
I agree with the possible Active Fuel Management problem. GM just won't give up on that disaster
@@kruzr1no instead they doubled down on it in 2019 with “dynamic fuel management”. New and improved with more failures…..
I agreed with the AFM had to replaced # 7 lifter tweise in one year with the VLOM.
AFM Delete
Hi Ray from the UK - glad you are back and feeling good! Love your videos and in my opinion they are the best on youtube. Keep up the good work😊
Good to see you back!!
You commented about that little box on the intake air sensor last episode. Its a translation box that adjusts the values, since the new pipes are bigger the pressure in them are lower than stock. So you need that box so the ECU can make sense of the new values otherwise you'd have to put a flow restrictor in the intake tube to accelerate the air past the sensor which defeats the purpose of that whole Banks system :P
ATTENTION TO ALL SUBSCRIBERS AND NEW VIEWERS
We are all happy to have Ray back in front, behind and around the camera for these great videos.
In Ray's previous employment, Ray would sing Doooodlieee Dooooooos from time to time. I am not sure how to spell it, or what that means or is in reference to.
@ 25:48 Ray sings Doooo. Not sure but has he been referring to the sound of the turbocharger when he does that? I only ask because Doodle Poo is really what comes to mind for me.
Thank you Ray for providing us with a great teaching experience and a great source of humor for your fans!
Glad you are back at it , hope you feel 100% soon . Nice job on the air system , can’t wait to see the rest of it . Take care Ray . Stay safe , have fun .
Awesome video. Thanks for the code Ray, used it to pickup up some temp sensors and extension cables to complete my setup.
Glad you're feeling better Ray!
Glad you're back and feeling better, Ray. I was getting worried about ya!
Every time I hear that clackity squeak, I'm reminded of when I was stranded in the middle of nowhere after the bearing seized on my alternator.
No apologies necessary for taking care of ones-self...
Excellent content Ray, Thanks!
I had a 351M in my 1978 full size Bronco with a spun bearing, crank was damaged so I picked up an engine at a local boneyard for a few hundred dollars. They did not know it was freshly rebuilt and I got really lucky.
The question I have always had regarding such a parts replacement has to do with pipe/component sizes. You mention the increased air flow by increasing the diameter of the pipes. I understand the concept but wonder how much of an increase in air volume you get when you are going from a 2" turbo outlet into a 3" pipe only to convert it back to a 2" inlet on the intercooler, then convert the intercooler outlet back to a 3" pipe only to neck it back down to 2" for the turbo inlet. To really improve the air flow, wouldn't you need to change everything in the path to 3"? A different turbo and intercooler with a 3" pathway would be able to take advantage of the 3" pipes you are adding. Of course, making that sort of change would be very expensive.
The pipes being larger than the entry and exit flanges may cause turbulence and be LESS efficient for flow, particularly since the flange edges are so blunt. This mod is therefore more about cosmetics than refinement or improvement, which is a shame - if the other components were upgraded as grandpalarry suggests, THAT could really be something!
@@hopefultraveller1. I have to disagree. I’ve done these mods to my own truck, and have obvious performance and mileage gains. Blanks tests everything before they put it out. It’s not just cosmetics. I’ve had their systems on my truck for over a decade. I have more power, lower EGTs, and better mileage. You are right about one thing though. It sure looks good.
@@rodgraff1782 - Thanks for your informed feedback - I stand corrected! Banks are clearly an inspired company, and I'm glad their products have given you an appreciable improvement in performance and efficiency - and looks!
I love your videos and your narration/ thinking out loud ;). I like when you are not holding the camera when you work on the cars. it feels more realistic and looks better. JMHO.. Keep up the awesome videos.
The intake alone is "snake oil" if you consider snake oil doing an upgrade 1/2 way. You can dump as much air as you want into the intake, if you can't supply enough extra gas and then exhaust it, it doesn't matter. Same applies for turbos.
Banks owns BG or vice versa, put it on dyno to shut me up.
The red banks 3 inh piping looks good on this Duramax customer is going to love it 17:12 @Rainman Ray's Repairs
27:06 dont forget the Wrench on top of the radator core support close the the hood latch. Just behind the grill you can see it at this time stamp.
Thanks Ray! Just got myself the Monster-Ram Intake I have been wanting...finally getting rid of that killer grid heater bolt potential. Another gem of a video, brother...keep 'em coming!!
Good to see your feeling better Ray
I like the power side of diesels but also the economy side as well. There's a lot to be said about getting 40 mpg in a 4200 pound, 20 foot long car with a 5.7 liter diesel V8 and a 23 gallon fuel capacity (my friend's 82 Olds Toronado diesel), or 70 mpg in a small hatchback (Chevette/I-Mark diesel). And these were entirely mechanical engines, no electronics at all. That's the other thing I love about old diesels, what other engine is there that requires no electricity to run, and can run on vegetable oil or used motor oil the same as it does on regular diesel. Love the 5.7 and 4.3 GM diesels especially, they have all of the sound characteristics of a vintage gasoline V8 or V6, but with the added diesel clatter.
Cool project! The new plumbing looks great. Just curious… is there any advantage to a 3” hot side pipe when it narrows to 2” at both ends?
You can bring that engine back to life!!!
Went fishing for bolts with my wobbly bits yesterday in a fenderwell. Thanks for the education Ray, would never have attempted before your vids...👍🇺🇲
Love your videos Ray. Don't forget that combination wrench that is on the core support.
Mo' powah, baby!
Love watching your upgrade vids as much as the repair ones. Keep up the good work!
8:05 ohh man now that is music to my ears 😍
I could listen to the L5P for hours 😌💨
I'm enjoying learning more about the "Dirty-Max" diesel family. No matter gas or diesel, we all know a better breathing engine performs better. And from what I know about Banks, they do their homework on development. I've also enjoyed getting Gale Banks' content here on YT. He has some very interesting projects going. I'm looking forward to the exhaust and electronics install on this "Dirty-Max" project.
Quick DX step might be to remove the serpentine belt to make sure that nasty noise in the 2018 is actually in the con rod. It sounds like a bearing, but I'd hate to pull the pan and see 8 perfect conrod bearings in it!
Thanks for the discount!
"Spun rod bearing" my heart just sunk for the owner.
Glad you feel better! While the turbo inlets and outlets are still the same size, the larger pipe should allow it to pull/exhaust more air IF IT CAN. that's probably the difference between whether something like this adds power or not, if the parts you don't replace can take advantage of the benefits made available by the ones you do. I noticed that the system re-uses the factory mass airflow sensor. I'm betting that cable that extended it to the harness also corrects for the reduced velocity/higher volume of air the sensor reads. Maybe :)
Missed the intro! 😢
I like the ‘look who that guy is’ Delorian door opening and Rat has the biggest cheese smile
an upgraded cooler would be a good 'next' upgrade to remove that restriction.
Hello everybody, good day to you! Welcome back! Glad you are here, I know I am!
Said by a Florida man!
Hmmm. Large pipe being reduced to a smaller pipe means a restriction and disruption of flow. Laminar flow now ? Better flow or worse flow ?
Nice to see you are feeling better and back at it!!
It's amazing to watch you work on some of these newer Chevy vehicles that will be still in great shape when living around there compared to in New York where the Chevy pickups have just over 100,000 miles on them and they're six or seven years old getting something done underneath where they might be lucky to last till 10 years old because of the rot from the salt
Does make you wonder why some mfgs choose not to use a more corrosion resistant steel, or better coatings for their products. The majority of the country sees snow and uses road salt, not just NY. Some vehicles do better with the salt (made better), so why have the others not changed? Because they know they will sell more cars if they fail sooner.
The solid lower pipe is better then a rubber hose but the rubber hose absorbs turbo pressure when the throttle is snapped open and then released. (No throttle plate involved) Works like a blow off valve. It sounded like the 5.3 had a miss when you had the camera near the tailpipe, at the engine it sounds like a roller on a lifter has piled up. We needed a listen down by the oil pan to get the full scope on the situation. Two Hurricanes down, hopefully if there's anymore they stay out at sea.
Ray, that sounds like a roller lifter wheel is grinding on the camshaft. Livernois Motorsports sells 50 state legal kits to remove the AFM/DOD junk... or just piece the kit yourself and tune with HP Tuners. I've done a couple LS engines and the engine becomes far more reliable, responsive, with the same mileage, unless you get a bigger camshaft. Just make sure the second cam journal isn't grooved. If it is you'll need new cam bearings. Most likely it will need new cam bearings and you have to pull the engine anyways.
Banks needs to sponsor some of your videos.
I kind of get some of the comments people make about it being snake oil and waste of money but it's only slightly true... everyone has to remember that it's only going to flow as fast as the smallest component will let it. In order to flow more air, you really need to increase the intercooler size, that is where your restriction is, hence the reducer to step down the pipe size.
A day without Ray is not a good day!
I personally recommend doing this type of setup to any car that has a turbo.
I installed all the piping and an upgraded intercooler on my Focus ST, and improved my 1/4 mile drag time from 14.76 @ 93mph to 14.002 @ 99mph with no tune, just all intake breathing bolt ons. Stock exhaust too.
Diesel's require a full delete for maximum reliability.
@@duckwacker8720 I’ve got the engine with the poor reputation. 6 liter powerestroke. I did the Banks mods over a decade ago. Everything to increase airflow, intake, boost tubes, intercooler and exhaust. I’m going on 18 years with original everything, turbo, injectors, head gaskets, EGR cooler, and valve. I did it all for engine longevity, lower EGTs, better performance and better mileage. I haven’t deleted anything, because I’m in California.
Thanks for the video Ray. Glad you are feeling better.
For those that don't understand what the up grade is doing. go get yourself a straw and try breathing through just the straw. You have to remember that car companies are in the business' of making money, the product you buy is how they make money. They build cars that just meet the MINIMUM standards at the lowest cost to them.
Great video Ray! Do you think you could snake in the lower hot side pipe without removing the ECM now that you have done one? I had a 2017 L5P and I blew the crimped connector next to the turbo outlet pulling a 15k 5th wheel in the middle of Nevada going up a steep grade, PIA. I limped to a NAPA auto parts store and got a T Bolt Clamp to replace the crimped on band and finished my trip. When I got back to my shop I ordered hot and cold Mishimoto pipes, never had another issue, truck had all the other Banks goodies on it except the exhaust, but I removed the restrictor in the tail pipe. Now I have a 2023 GMC Denali 3500 Dually. Put a derringer and I dash on after about 1,000 miles. With 8000 miles on the truck I had a cabover camper on it and towing a 16' deck over trailer with my built Jeep TJ on it and after pulling Togwotee Pass in Wyoming I blew the crimp fitting on the hot pipe!!!!! All I had with me to limp home was bailing wire and two rows of double wrap wire tightened down as much as possible was good to about 7 psi, go over and POOF off again. Limped home 150 miles since it was a Sunday, had to repair the connection 5 times. Got a new pipe from GM under warranty, but I don't trust it. I am thinking about the Banks hot and cold pipes too. I added the Banks ram air intake a couple thousand miles ago and WOW what a difference in regen frequency. I was regening every 225-250 miles towing my Jeep trailer or my 15k fifth wheel with little to no passive regeneration. Now since changing the intake I am getting upward of 700 miles between regens and while towing I can watch the soot level drop on my I dash, incredible. I am only at 12,000 miles now, so my factory air filter was very clean. Have you heard of anyone dynoing before and after the boost pipes with the derringer installed? There was a video a while back from Werhli Custom fab claiming over 60 hp by just adding the boost tubes on a 17-19 L5P, but I haven't seen a dyno test from Banks yet.
Ray can fix it! He fixes everything! 😎
I love it when you show the cooperation that your family provides. Love that Wife Unit. Where is X Files unit?
Mucho Airflow good! Yep that poor engine is toast. Tell Eric to get on a plane, he's got a tear down to do🤣🤣🤣
Great song playing in the background 😊
Re my previous post, that's how a venturi in a carburettor works, the air flow increases past the choke point of the venturi. PS Carburettor is a French word meaning "don't f--- around with"
Well first and foremost Brother Ray glad you're feeling a lot better second that truck sounds great and the bonus yeah it needs a new engine but I'm glad you're feeling a lot better you sound like your years old self again love you bro
My car always seems to go faster after a good detailing, so looks do matter.
CARB only makes it harder and not much choices. Cool build
*hears Ramstein come on in the background... starts head banging*
finally been waiting whole weekend lol..thx mr rai
You had me sold when you said it will sound better.
Regarding your physics comment: A wider air pipe is not *always* going to improve performance. The limiting factor is going to be the smallest surface area of your intake pipes -- so the pipes should ideally be as big as the surface area of your air box (for the turbo inlet) or the compressor outlet (for the hot side) respectively. Any bigger is going to yield diminishing results, as it will not increase air volume -- it may even lower boost or cause surging because the air has surface area to expand into.
The perfect situation is where your intake surface area is equal to the total surface area of your intake valves, this would mean the intake has no restriction along its length.
Obviously there's an advantage in sound and the engine bay looking a lot cooler with the silicone pipes as well.
15 % is no joke! Jump in on that!
Bye the looks of the banks garage, I'd feel very secure with their R&D department! They test, test, test, and you guessed it! More testing! Their stuff just works! If ya got a diesel and need more power, you're good with Banks!
Yea, they spent around two years of testing and engineering for that diff cover. During R&D, Banks buys all of the competitions products, and test their products against them. They will only put out products, that will perform better than stock, and better than all of the competitiors products. I think Gale Banks knows a little more about how air behaves, then all of the wannabe physics professors, who say these products don’t improve airflow and performance, and are just for looks.
Crankshaft and connecting rod bearing w/oil pump absolute best case scenario on that last vehicle.
Glad you're feeling better
And at least one piston and a head.
Repair they live for ever
I'm subscribed to banks power on RUclips they have a video on that adapter for the mass air flow sensor it keeps the sensor reading stock readings for the bigger piping so it doesn't trip a check engine light
Has everyone seen the Banks series about diff covers? Banks Power is the channel. There's a playlist. I always thought it was just to hold lube.
thankyou Ray,another decent upload,have a great day and see you in the next one,,👌👍
This person got mmmmooonnneeeyyy that trans cover is like 2000 it’s self 👀👀
Happy Tuesday Ray. This will be a hot project. This will be a great video. 🚀👨🏻⚕️
I am glad you had some, “ shameless self promotion,” because I was able to get you 15% so I could get a few items of Banks I need to complete my 2018 Ram 3500! Thanks Ray! I enjoy every episode keep doing what you are doing!
Awesome that Duramax sounds very nice
Great video! I have to question the larger diameter pipe affecting much since the intercooler pipes are smaller...
the last truck Big Truck Big Problem Big Money to fix LOL
Hey, MBRP exhaust. Manufactured in Huntsville Ontario. Good quality product!
Kudos for switching off that compressor the proper way.
Always great content, Ray
First thing I did to my dodge Cummins was install a full banks kit that truck is unbelievable and I get 25 miles to the gal and 18 miles to gal pulling my 32 ft 5th wheel fully loaded I'm serious
Hello Ray, don't worry you are entitled to get the most important thing on life: time with your beloved, besides, was not so short video.
Hope you can give me a light on a problem with my motorcycle, she is a Kymco Scooter 500 c.c. Fuel Injection engine, everything works very well until the engine gets very hot on hot days, then the engine stalled on idle, if I am able to small throttle before the stalling the engine get normal idle RPMs but if the motor stalls is very hard to get it starting again, normally I had to wait until engine get some cold and starts at first crank.
Thanks a lot for all your help and great content. Regards From Colombia.
More air=more boost, cool!! For the other truck, run over and talk to Cletus, he’s probably got a 5.3 just laying around!
hey ray, before i call it a connecting rod failure i'd want to check a couple other things first, like pull the valve cover and check the rockers etc. i just think more info to actually confirm what the issue is. Yep it is internal no doubt and sounds really bad but i've seen broken rockers, bad cam lifters, it's just too hard to say till ya get a good look at it. usually a bad rod would be knocking but i guess it could squeel too heheh. it does sound pretty nearly though. would love to see the tear down to see what that actually is.
You can dooo it!
😎😎