SO glad you made this video, your machine looks great...can't wait to see how it works with the new controller! Thanks for the shout out, the part at the end of the video had me laughing out loud...I make the same face every time I mess up the recording also : )
Great video, enjoyed learning your story on the build of your machine. Keep up the great work. Look forward to future videos high lighting your business and products you make.
Congratulations on all of your endeavors. Although it may not be the easiest or best way to go. The accomplishment of getting sheetcam to work with a general cnc controller (centroid) and what goes into that is truly inspiring. And I think you did an impressive job! 👏
Pourquoi ne pas avoir achete une machine en chine deja toute fait , avec leur prix ca aurais presque arrive a la meme chose ? Tes reponse son pour moi une veritable source d'information et d'inspiration , encore un gros merci .
HI! really interesting content. It's nice to know that there are people like you and Travis talking about their personal experiences building fiber lasers. this type of content motivates people to do more. who knows if one day I too will succeed in construction 
just out of curiosity, why are you switching from the closed loop steppers to the servos? The tuning situation is exactly why I keep using closed loop steppers. There are a few auto tuning set ups out there, however, trying to tune the dual motor gantry set up keeps me sticking with the steppers. Tuning the servos to almost perfection seems like a difficult process and do you really ever know if they are optimally tuned? How do you know? Great job on this build, can't wait to watch your journey.
@josepatron4950 I switched the stepper because I wanted higher rapids and faster acceleration. The tuning process is difficult not easy if you're not familiar with how the tuning process is done. I can says without a doubt that they are better then close loop stepper by 1,000,000%%% haha
Hello Friend, Glad to see your sophisticated Laser machine..! Can You Do a beginner level video as a guide to Mach3 Based CNC Hobbyists? Explaining the differences in the Controllers What are the differences between a plasma cutter Gcode and the same Gcode for a fiber laser machine and how does the controller handles it including any focusing concepts also. I couldnt find any Guided information to step up from CNC Router concept to such a fiber Laser concept. I mean -Example:- We Can Cut a Shape in sheet metal using Mach3 Plasma Machine which uses Z- Strokes to ignite and start the the cut What difference for The Same shape to be cut in Fiber Laser machine...! It Can read Same Plasma Profile Gcode? Or Modifications in post process needed? And How Cutting Commands are outputted by the controller how the focusing concept works and how the controller handles it..etc Whu Mach3 Controller cant be used to build such a cnc fiber laser,...! Thse beginner level doubts remain uncleared..! Still trying to learn..!
@BipinBabu-k4c got it, maybe I will address it in future. I mentioned this in my videos, it you only want to cut sheets then it will be much easier and better! To use raytools xc3000s . He have all the necessary functions for laser cutting and he is not expensive! 500-600usd
Salut tamar , je voulais savoir si tu avais eu a changer la carte acorn de centroid pour les nouveaux servo motor. si oui quel carte a tu utiliser pour les 7 moteurs . merci
Merci pour la reponse . au sujet de centroid quel carte aurait tu achete ou bien il y a tu d'autre carte pour les 7 moteur , pour un axe rotatif sur le marcher que tu connais . moi aussi j'ai acorn sur mon diy cnc router . Merci pour les information , je vais essayer de savoir si il y a un marcher chez nous .
@truethinker68 not sure about inch pr minute. But max feed rate, millimeter pr minute is 33,000. It's with 1:10 reducers With the new inovance servos I will be able to go up to 60,000 mpr with 1:5 reducers
How much can one spend making similar or better machine taking into account your advice and hurdles/milestones you ripped through?. All this preferably for the hybrid sheet with pipe cutting features. Pipe cutting laser from industries are really expensive. Also asking if the same software used to cut sheet is it same for cutting pipes?
@nordenconrad14yearsago45 cost for all the components is around 20k usd. The controller comes with two cutting softwares, one for sheets and the other one for tubes
Bought some 1kw ethercat servos from lichuan in china great price and service ..reach out to alley zang What a legend .... Shenzhen Xinlichuan Electric Co., Ltd.
Interesting build. We shared this video on our homemade tool forum last week 😎
SO glad you made this video, your machine looks great...can't wait to see how it works with the new controller! Thanks for the shout out, the part at the end of the video had me laughing out loud...I make the same face every time I mess up the recording also : )
@diyfiberlaser super excited to start working on it so wish me luck haha
Omg so true it's so relatable haha me every time I try to make a voiceover.
Thank you for video! Good job !
Definitely appreciate your videos, finding them very insightful for what is possible with DIY laser builds! 👍👍👍
Very helpful, thank you.
I also enjoyed you adding the part at the end.
Great video, enjoyed learning your story on the build of your machine. Keep up the great work. Look forward to future videos high lighting your business and products you make.
Congratulations on all of your endeavors. Although it may not be the easiest or best way to go. The accomplishment of getting sheetcam to work with a general cnc controller (centroid) and what goes into that is truly inspiring. And I think you did an impressive job! 👏
@@jamesk4535 thanks I appreciate it 🙏
Congratulations! The cnc laser cutting machine was really good! Would you have the project to make available?
@@Guilherme-ts6br sure
Vielen Dank. Ihre Videos hat mich motiviert eine eigene Faserlaser Maschine zu bauen für meine Bedürfnisse.
Weiter so 🎉😊
Pourquoi ne pas avoir achete une machine en chine deja toute fait , avec leur prix ca aurais presque arrive a la meme chose ? Tes reponse son pour moi une veritable source d'information et d'inspiration , encore un gros merci .
HI! really interesting content. It's nice to know that there are people like you and Travis talking about their personal experiences building fiber lasers. this type of content motivates people to do more. who knows if one day I too will succeed in construction

@@burhanmuça thanks dude
just out of curiosity, why are you switching from the closed loop steppers to the servos? The tuning situation is exactly why I keep using closed loop steppers. There are a few auto tuning set ups out there, however, trying to tune the dual motor gantry set up keeps me sticking with the steppers. Tuning the servos to almost perfection seems like a difficult process and do you really ever know if they are optimally tuned? How do you know? Great job on this build, can't wait to watch your journey.
@josepatron4950 I switched the stepper because I wanted higher rapids and faster acceleration.
The tuning process is difficult not easy if you're not familiar with how the tuning process is done.
I can says without a doubt that they are better then close loop stepper by 1,000,000%%% haha
Really nice machine man! :)
Good work brother!
Hello Friend,
Glad to see your sophisticated Laser machine..!
Can You Do a beginner level video as a guide to Mach3 Based CNC Hobbyists?
Explaining the differences in the Controllers
What are the differences between a plasma cutter Gcode and the same Gcode for a fiber laser machine
and how does the controller handles it including any focusing concepts also.
I couldnt find any Guided information to step up from CNC Router concept to such a fiber Laser concept.
I mean -Example:- We Can Cut a Shape in sheet metal using Mach3 Plasma Machine which uses Z- Strokes to ignite and start the the cut
What difference for The Same shape to be cut in Fiber Laser machine...!
It Can read Same Plasma Profile Gcode? Or Modifications in post process needed?
And How Cutting Commands are outputted by the controller
how the focusing concept works and how the controller handles it..etc
Whu Mach3 Controller cant be used to build such a cnc fiber laser,...!
Thse beginner level doubts remain uncleared..!
Still trying to learn..!
@BipinBabu-k4c got it, maybe I will address it in future.
I mentioned this in my videos, it you only want to cut sheets then it will be much easier and better! To use raytools xc3000s .
He have all the necessary functions for laser cutting and he is not expensive! 500-600usd
😂you had me laughing out，we see your efforts tarma！ Just build！
@Skyfirelaser haha I do my best 😅😅
Salut tamar , je voulais savoir si tu avais eu a changer la carte acorn de centroid pour les nouveaux servo motor. si oui quel carte a tu utiliser pour les 7 moteurs . merci
Merci pour la reponse . au sujet de centroid quel carte aurait tu achete ou bien il y a tu d'autre carte pour les 7 moteur , pour un axe rotatif sur le marcher que tu connais .
moi aussi j'ai acorn sur mon diy cnc router . Merci pour les information , je vais essayer de savoir si il y a un marcher chez nous .
Whats the feed rate? Ipm?
@truethinker68 not sure about inch pr minute.
But max feed rate, millimeter pr minute is 33,000.
It's with 1:10 reducers
With the new inovance servos I will be able to go up to 60,000 mpr with 1:5 reducers
How much can one spend making similar or better machine taking into account your advice and hurdles/milestones you ripped through?. All this preferably for the hybrid sheet with pipe cutting features. Pipe cutting laser from industries are really expensive. Also asking if the same software used to cut sheet is it same for cutting pipes?
@nordenconrad14yearsago45 cost for all the components is around 20k usd.
The controller comes with two cutting softwares, one for sheets and the other one for tubes
Ton frame en aluminium te revient a combien en $ us ? merci
@@alainroy400 around 2500usd
Bought some 1kw ethercat servos from lichuan in china great price and service ..reach out to alley zang
What a legend ....
Shenzhen Xinlichuan Electric Co., Ltd.
Hello sir i am from Pakistan i want to talk with you about fiber laser please
@asifbaba3432 you can contact me on my email.
I attached it Bellow the video