Thank you! No, unfortunately I don't have a written down pattern, but I can tell you what I did and give you some measurements. I formed the end caps over a basic spray paint can and sized the lid cap up by wrapping a piece of leather around the can. The body piece is 10" tall by 9.25" around. (It was originally a little longer than 9.25" but I cut it down because it was too long. I just wrapped it around the bottom cap to measure). I used a 1" wide strip for the lid cap (again measuring by wrapping it around the cap), and the closure strap and belt loop strap are 1/2" wide. Hope this helps/makes sense. Thank you again for watching!
@LeatherbyLanes Thanks for taking the time to answer. The information should give me enough to have a reasonable go at this. Would you mind telling me what was the thickness of the leather? I was thinking perhaps 5 ounce, perhaps a little thinner for the end caps.
The only thing I might add is a small loop on top of the cap for the strap to pass through so that the strap can't slide off the side of the cap. But excellent work otherwise.
Yes! The only reason I didn't do that was because it would cover up the 'E' that's on the cap. But otherwise, I'm of your opinion that it would keep it from slipping. Thanks for the feedback!
Ms. Lanie, this is amazing!🎉😎🤠
Ms. Lanie, this is so cool!🎉😎🤠
That looks amazing! The black with the brown leather is 👌
Nice Work!
Really liked the design and the contrasting leathers works very well. Is there a pattern available? Thanks
Thank you! No, unfortunately I don't have a written down pattern, but I can tell you what I did and give you some measurements. I formed the end caps over a basic spray paint can and sized the lid cap up by wrapping a piece of leather around the can. The body piece is 10" tall by 9.25" around. (It was originally a little longer than 9.25" but I cut it down because it was too long. I just wrapped it around the bottom cap to measure). I used a 1" wide strip for the lid cap (again measuring by wrapping it around the cap), and the closure strap and belt loop strap are 1/2" wide. Hope this helps/makes sense. Thank you again for watching!
@LeatherbyLanes Thanks for taking the time to answer. The information should give me enough to have a reasonable go at this. Would you mind telling me what was the thickness of the leather? I was thinking perhaps 5 ounce, perhaps a little thinner for the end caps.
@@andrewgray9663 Yes, it was 4/5 oz. for everything. I hope yours turns out great!
The only thing I might add is a small loop on top of the cap for the strap to pass through so that the strap can't slide off the side of the cap. But excellent work otherwise.
Yes! The only reason I didn't do that was because it would cover up the 'E' that's on the cap. But otherwise, I'm of your opinion that it would keep it from slipping. Thanks for the feedback!
Ms. Lanie, this is so cool!🎉😎🤠
Ms. Lanie, this is so cool!🎉😎🤠