Digital Clock Using 4026 IC | Electroniks Day
HTML-код
- Опубликовано: 30 июл 2024
- 24 Hours Digital Clock Using 4026 IC and 555 timer with 7 segment Displays.
Like Share and Subscribe
Download Simulation File:
For more details visit website:
hassam794.weebly.com/digital-...
How to properly connect 555 Timer, and how to set specific delay in 555 timer
hassam794.weebly.com/home/how...
Download link:
drive.google.com/open?id=1Xm6...
i never liked a video before ... i liked yours and subscribed
thx for sharing
i never commented too ... XD
so your video is a really good one
im working with the chip MSM9004-02, but i dont know what exactly gets
connected to pins labeled as, clock, load, data, and blank.
I have design the same clock on Proteus as well as on breadboard but ic 4026 is not getting reset I check the output of the 7411 AND gate for input taken from ic 4026 outputs to reset at "6", it is working properly but ic 4026 is not getting reset. Plz help out
circuit run korar por circuit akbar full stop korle seta R run nai na kano? please janaben aita.
Hi Im just a little confused about the hours...like how are they gonna reset to zero? Can you plz explain that
Sir I haven confusion wear is reset button after 12/24 hr
Sir for display 13 on hours what connection we do with AND gate?? I have to reset on 13.
Sir plz tell us how u conect the 7 segment with 4026 ic all the conection after 555 timer
thank you very much
how to set time for this?
hello sir the circuit is well described but how to adjust the clock to current timing please let me know thanks
hello, how can I add an alarm with logic gates?
sorry for asking, how to connect the buzzer so every 5 minutes, the buzzer is ON
where should i place reset button and start\pause button???
What are the materials for this?
If some video on that plz share with us that how u conect the counter and ic qith 7 segment plz
Pehle aapka channel subscribe karunga itna accha video banane ke liye, phir uske baad Ram Mandir banaunga
Jai Shree Ram
how to make it into an alarm clock?
Dude how to chage it to 12 hr clock
Hello Can you send me the pcb layout of this ckt? or just upload it needed for my project thankyou
How to design pcb of these can u plz tell this
Sir where and how I add buttons here
If i want to manually reset seconds hours and minutes whats should a do
Please can you tell me
yes boss
Nice video.. But how can i make it for 12 hours ??
Pin 8 and 16 of IC 4026 is connected to ground and Vcc?
Yes.
Thank you, does all the IC's are necessary to have a socket(IC protector maybe).?
its good if u use but no its not necessary.
yes
Sir .that 7segmen anoda or catoda?
Its Common Cathode, for more details visit
hassam794.weebly.com/digital-clock-using-4026-ic.html
hi ...Can I send the file for this project to my e-mail?
link is already in description, you can download file.
सर्, hour मिनेट को सेट करने के लिए push बटन कैसे लगाए। प्लीज reply
No reply?
will the clock work perfectly if r1=r2??
No brother it will not work. if r1=r2 then your 555 timer will not generate output pulses with delay of 1 second.
is there a relation between the values of r1 and r2? one should be greater than other?
yes there is relation,, you can read my this post about 555 timer, it explains how you set the delay.
hassam794.weebly.com/home/how-to-properly-use-555-timer
can you send me afile of project?
Sir plz tell me about coding???Where is the code of this digital clock and how i have to do coding???
its purely IC based clock, no microcontroller or coding is required in this project.
how to reset all 7-segment to zero?
Hello
How to set time in it
you can use push buttons with clock pins of 4026 ic
If u got to know how to set time on it please can you tell?
Please Can U guide How to Set Clock Time.....
Where to set push button in the circuit to set the time?
Use two push button with clock pins of first digit of minutes and hours 4026 IC.
@@CircuitsInfo Sorry SIr, I didnt understand.
Would you mind editing the proteus file for me?
@@blackhawk6540 have u done it ?.. can u please share
@@blackhawk6540 can u done this
@@farriko4528 yes sorry for late reply, he was meant to provide direct vcc to the ic terminal.
Circuit not working on Breadboard
Please check your wiring again even a single wrong wire can cause problem. I already tested this on breadboard and it's working perfect.
@@CircuitsInfo can you send me pic of your bread board diagram
@@muhammadzeshanshaheen3058 its the same diagram that you see in video. connect properly and it will work.
@@CircuitsInfo I connect 9v supply my ICs burned
@@muhammadzeshanshaheen3058 you can apply upto 15volts thats not the reason for burning your ICs. You may have short circuited the ICs.
Hindi ya urdu mei bol lo sabko samaj ajaega