Super excited to tune this thing to the max going forward. JOIN THE DISCORD! Get help with mods, inspiration, talk about games or gunpla, and more! Level 3 and DISCORD PARTNERED! The best place to talk NERF! discord.gg/nerf
The reason the fps dropped is due to how co2 cans work, its just one large resevoir of co2 so the pressure in the whole thing drops with each shot, lowering the fps.
Rogue CHlNCHlLLA If you 3d printed some new grips that went higher up on the gun, and gave it a huge bull barrel it would probably look similar to either a Red Hand or Last Word
Wow Devilz was pretty known in the lego gun community awhile ago, glad to know his skills transferred to another hobby (Wish he released his dreamer lego blowback pistol :c)
I was wondering if he's the same guy and did research. He was probably the only one to get the instructions for Real Dual Desert Eagle's blowback mechanism. I remember trying to build one but i just could figure out the fire control group and started crying. Good times.
I say brass the cylinder and don't have a barrel at all so it's like a pepper box! Also I love this thing even if you're still smack talking the hammershot because you've got tiny hands. It's okay though you've got a taste for much more powerful nerf blasters than me.
If what Napoleon above me is saying is true, then you could probably add some plastic extensions to the hammer to make it less sharp, add a few more cosmetic upgrades, and you got yourself The Last Word from Destiny. Oh, and uh, that revolver used by that cowboy from that one Team Fortress 2 clone with way too many characters, I guess.
Eh, we'll likely end up with something a little more... Sci-fi looking, since our government is retarded. CO² is basically guaranteed near future tech for dart blasters since there's money in it.
Important note for UK viewers, anything powered by 'co2 capsules' are legally considered weapons regardless of actual performance. So using this in a nerf/larp/airsoft/paintball, is considered assault and you go to prison. Which sucks. On a more technical note. I'd probably extend the cylinder forwards and brass it. You'd want to test different lengths to see what gave the highest muzzle velocity, but using brass will give you a massive increase in consistency. I'd also really shorten the 'barrel' piece, as that's only really a scar housing. I've never had any success with 3d printed scar surfaces, but using it as a 3d printed housing for the classic fishing wire should give you the performance without any of the detriments. Certainly there's a lot of potential here for those who can actually use it.
I know this video is nearly 3 years old now but I just want to show my appreciation for the use of the Dustforce music in this review - probably one of the best video game OSTs of all time in my opinion. :)
How many darts from a CO2 cartridge? And it looked a bit cold where you were, which could reduce the pressure from the cartridge lowering velocity...and not all cartridges brands are the same pressure.
It's hard to tell with the white on white, but it almost looks the timing is bit off (as in, as the hammer is cocked, how the cylinder lines up with the barrel in time), which would be the cause of the fluctuating velocities and random fliers.
I am definitely going to go to Walmart and get a few of these to mod up and battle with my kids.super cool.i think if you add an inch or two of barrel and get a little more air through it maybe bore the air channel out and have you thought about cutting about 30% of the end of the darts off? When I was a kid we used to cut the shank down about a half inch and jam pencil erasers up the end of a few darts and save them for long range shots.proved effective up to about 50ft with predictable accuracy.i think you’re really into something here
And what exactly makes it the best? Not the performance, not the capacity, not the ability to one hand it... it's not even the best version of it's own design (the Sweet Revenge is far more comfortable).
That's such a cool thing. If it could be dialed down to 100 I bet LARPers would eat it up. Both parts of the cylinder painted/printed the same color would make it looks even better. 3d model for the scales for even more customization...
bringoutthelegos Make sure to have the safety on; Ocelot’s revolvers were single action only, meaning that when not cocked, he could spin them without risk of shooting himself.
Interesting note: one could theoretically load this with a cardboard-disc base, some airsoft BBs (6mm = .24cal = theoretically 2 per layer in a .50cal chamber) and another cardboard disc as a cover and use it as a shotgun for airsoft purposes, depending on how much power output it has. Since the base gun sends .177 pellets out at 425 FPS, it might be possible. Half-darts would definitely make nice slugs for such purposes, considering that’s its intended ammunition. Overall, this thing looks sweet, regardless of how you use it! The cylinder system reminds me to some extent of cap-and-ball revolvers, though (obviously) these are far easier to swap in and out on the fly. Might get/make one myself in the future!
Yeah this might be better, but an upgraded spring magpie is better, also if you buy a magpie, you have 2 options of grip, plastic, or wood, 3D printed wood, and plus it shoots 156 with worker darts, haven't checked shooting waffles, if you wanna load, you load it like an actual revolver by the side like the maverick and strongarm, the best part is, You can buy more cylinders then having only 1, i have 4 meaning i have 5 cylinders
That barrel makes me think it's holstered in a plastic pouch for some reason. This is undeniably awesome but the downside inevitably (along with any co2 blaster) is gonna be dat operating cost of buying the cartridges. But where else can you get top open swappable cylinders besides a legendfire or extremely modded hammershot? and you can just make more with a printer!
I would say brass the cylinders for consistent dart fit as 3D would vary on dart fitting. The other part I would say leave it as is cuz obviously the gap would expel majority of air out so brassing the other half may lead to jamming. And as well definitely would depend on dart type. Otherwise it looks good, and keep up the vids mate 🤠👍
Super excited to tune this thing to the max going forward. JOIN THE DISCORD! Get help with mods, inspiration, talk about games or gunpla, and more! Level 3 and DISCORD PARTNERED! The best place to talk NERF! discord.gg/nerf
I hope this thing can get even better
That yeet thought...
Walcom S7 could put brass in the cylinders to help with performance?
Love your work Walcom. That said, If you want to Yeet that Hammershot you could Yeet it my way. Then I could have a matching pair.
The reason the fps dropped is due to how co2 cans work, its just one large resevoir of co2 so the pressure in the whole thing drops with each shot, lowering the fps.
Toy foam guns: starts using co2
Airsoft: ಠ_ಠ
TheCancerousLoli ik I don’t know why I still watch these I know a days play Airsoft and I almost screamed when I heard they are now using co2
Im really boutta speedsoft slide to this mans house to stop this war before it happens. Sincerely, Tokyo Marui gold match Hi-capa.
BlackHawk Gaming *pumps sniper way too many times*
The closest Airsoft field near me had a Nerf War Day, of course the Modded Nerf Guns so yea that happened, wished I went to see it
Paintball
"Cybertruck barrel,"
Oh that's actually kinda funny
Elon Musk be investing in nerf guns
Is that a reference to sister Michael?
@@ChicoTunda I'm going to have to say no
It needs to be longer so I can finally have a Destiny 2 hand cannon.
Wymsic_ broooo yes
Which one?
Rogue CHlNCHlLLA If you 3d printed some new grips that went higher up on the gun, and gave it a huge bull barrel it would probably look similar to either a Red Hand or Last Word
The Last Wymsi now he has to shoot like the last word
The Last Wymsi should be the hawkmoon
8:07
This, folks, is how we do not handle a gun.
Lmao no kidding. Not a good habit to get into...
I know, I started dying when I got to this point.
(babybabybabybabybaby)
what your not suppose to look down the barrel? (Im joking)
I was looking on how his index finger was constantly on the trigger. This man is not a man I trust with a real one
Remember kids, co2 doesn't do so well in colder temps.
George Attard m8....
True
@@bt4670 whoooosh
@@metalgearisgodlike8647 how is that a wooooosh
Dennis Roginskiy that’s the woosh
1:00
For those only interested on the *"YEET"*
honestly loved the yeet
Damn that yeet was sexy
Lol
Thank you
Wish the 3d printed barrel was longer, for the aesthetics
Same, I kinda want it to look like a big iron.
You could easily modify the files for a longer barrel. I'm planning on taking the public files and combining them with a Destiny hand cannon model.
yeah, with a magnum-looking front end
@@satav5805 big iron hip
I need a long barrel for an Old-Fashioned or a Trust
At this point in time, I feel like Walcom only keeps a hammershot around just to abuse it....Much like what Coop does to his Deploy
And probably some other guns, one of which Coop actualy threw on the ground and broke it because it kept jamming
tycho goedhart oh yea, he did it to the double dealer.
*Did*
@@grapeapeductape2489 yeah, I know he murdered a Deploy with an axe, but he has another one that he brings out from time to time.
until he destroyed his deploy
that looks badass even without a paintjob
But it needs paint before it goes anywhere.
yeah your right not very smart going to a park with that
Wow Devilz was pretty known in the lego gun community awhile ago, glad to know his skills transferred to another hobby (Wish he released his dreamer lego blowback pistol :c)
I was wondering if he's the same guy and did research. He was probably the only one to get the instructions for Real Dual Desert Eagle's blowback mechanism. I remember trying to build one but i just could figure out the fire control group and started crying. Good times.
Lol, hi guys
@@DevilZcall THE MAN, THE MYTH, THE LEGEND HIMSELF HOLY CRAP.
This honestly looks like a hand cannon straight out of Destiny, only with a cut down barrel.
You can even reload it like a Destiny hand cannon by removing the cylinder and putting in a new one *chuckles*
Looks like the duke mk 44
The three main break action barrels are Trust, Spare Rations, and The Old-Fasioned.
So true, love the game
It looks like Erianas vow
This is how that Mcree blaster should have been, in my opinion.
Exactly, and not a just a single-shot top priming blaster. If it did, I think it would have even beaten the hammershot,
I say brass the cylinder and don't have a barrel at all so it's like a pepper box! Also I love this thing even if you're still smack talking the hammershot because you've got tiny hands. It's okay though you've got a taste for much more powerful nerf blasters than me.
full length version would be cool for Nukelanta
I’m stoked to see this kind of interbreeding between Nerf and other “battle sports”!
We need to see airsoft vs paintball vs nerf
@@tristanperciful6609 cant wait to shoot nerfers with a 550 fps sniper
@@iggypeters5564 fun
@@maribelle1935 see wich sport has better gear
@@iggypeters5564 oh no I'm not disagreeing with you lol
"YEET!" -Walcom 2019
Yeetus the hammer shottus
I cried a little
As soon as I saw the thumbnail I clicked faster than I click on those...ahem...SPECIAL anime ads
Ah yes Strength Perception Endurance Charisma Intelligence Agility and Luck
Oh yeah, I click on those fallout shelter ads all the time ;)
If you're so done with your HammerShot, I'll take it.
Same thought came to my mind
The council of foamy walruses casts you into the fire *proceeds with cult like yeet*
"co2 isn't allowed in some places"
Breathing: AM I A JOKE TO YOU?
I've got a 357 c02, though the clip to hold the barrel doesn't seem to want to work cause the barrel doesn't want to stay there.
DevilZ? The same DevilZ who used to build lego blowback guns? Glad to hear he's still working with stuff
I just need to know one thing before I go all in on this:
CAN
YOU
FAN
THE
HAMMER?
I have this gun without the actual upgrade and yes you can although it kinda hurts because the hammer is sharp at the top
If what Napoleon above me is saying is true, then you could probably add some plastic extensions to the hammer to make it less sharp, add a few more cosmetic upgrades, and you got yourself The Last Word from Destiny.
Oh, and uh, that revolver used by that cowboy from that one Team Fortress 2 clone with way too many characters, I guess.
@@luckyluciano1691 couldnt you just cut off the sharp part or top it with rubber?
@@kiwirain1235 Yeah, you could I don’t use it enough to actually care that much but you could
Alot of CO2 revolvers don't work well that way..
BIG IRON INTENSIFIES
Leave the gun, take the cannoli
Looks like hes already had too many cannoli.
Dude sounds like Patrick Stump from Fall Out Boy
my hammer strikes are not happy with you
dont telll them i like this blaster
yeah.....the hammershot is hard enough to get here in australia....I dont think ill find a way to get this anytime soon....
Eh, we'll likely end up with something a little more... Sci-fi looking, since our government is retarded. CO² is basically guaranteed near future tech for dart blasters since there's money in it.
Important note for UK viewers, anything powered by 'co2 capsules' are legally considered weapons regardless of actual performance. So using this in a nerf/larp/airsoft/paintball, is considered assault and you go to prison. Which sucks.
On a more technical note. I'd probably extend the cylinder forwards and brass it. You'd want to test different lengths to see what gave the highest muzzle velocity, but using brass will give you a massive increase in consistency. I'd also really shorten the 'barrel' piece, as that's only really a scar housing. I've never had any success with 3d printed scar surfaces, but using it as a 3d printed housing for the classic fishing wire should give you the performance without any of the detriments.
Certainly there's a lot of potential here for those who can actually use it.
Walcom, have you seen the second wind on OOD's channel? It's a 100+ fps 7 shot big shock
Would the hammershot be better if you took the dart posts out and used short darts?
I know this video is nearly 3 years old now but I just want to show my appreciation for the use of the Dustforce music in this review - probably one of the best video game OSTs of all time in my opinion. :)
How many darts from a CO2 cartridge?
And it looked a bit cold where you were, which could reduce the pressure from the cartridge lowering velocity...and not all cartridges brands are the same pressure.
The way you hold this revolver made it look like you were using a gun in a video game.
It's hard to tell with the white on white, but it almost looks the timing is bit off (as in, as the hammer is cocked, how the cylinder lines up with the barrel in time), which would be the cause of the fluctuating velocities and random fliers.
I am definitely going to go to Walmart and get a few of these to mod up and battle with my kids.super cool.i think if you add an inch or two of barrel and get a little more air through it maybe bore the air channel out and have you thought about cutting about 30% of the end of the darts off? When I was a kid we used to cut the shank down about a half inch and jam pencil erasers up the end of a few darts and save them for long range shots.proved effective up to about 50ft with predictable accuracy.i think you’re really into something here
Is there any similar conversion for the Umarex tornado Revolver 4.5mm? Thanks in advance.
The Hamer shot is the best and if you think it’s bad you think wrong
And what exactly makes it the best? Not the performance, not the capacity, not the ability to one hand it... it's not even the best version of it's own design (the Sweet Revenge is far more comfortable).
That's such a cool thing. If it could be dialed down to 100 I bet LARPers would eat it up. Both parts of the cylinder painted/printed the same color would make it looks even better. 3d model for the scales for even more customization...
The version on thingiverse should stay under 100fps very consistently, and the design is also a cleaner canvas for realistic mods
That co2 is a Crosman Vigilante, and I own one of those, it can shoot Pellets or BB's.
.177 Cal / 4.5 mm Pellets
.177 Cal / 4.5 mm BB's
Is the video of the modded Co2 shotgun out yet? I can't find it.
Could you sleeve a worker scar barrel into this? (You might ream a forcing cone into it with a Taper Reamer.)
Is there a way to use compressed air that's refillable instead of the 12g co2 cartridges?
that intro was top ten anime betrayals material
where can i find the best hammershot upgrades
This reminds me of the dire promise from destiny 2.
Do the files for this exist for regular sized nerf darts? My club doesnt allow half darts
I especially like the way you looked down the barrel of a loaded pistol... spot on. Smh
with his finger on the trigger no less
What's the practical/safe limit for nerf fps? How can we get denser/heavier darts?
Would love to flip two of these ocelot style
bringoutthelegos Make sure to have the safety on; Ocelot’s revolvers were single action only, meaning that when not cocked, he could spin them without risk of shooting himself.
Can it have a longer cylinder to shoot two half darts?
everybody gansta till walcom pulls out his real revolver
Did they ever release the files publicly?
Could a 7/8" in paintball gun perhaps be modified to shoot rival rounds?
is there a sexier longer barrel?
Interesting note: one could theoretically load this with a cardboard-disc base, some airsoft BBs (6mm = .24cal = theoretically 2 per layer in a .50cal chamber) and another cardboard disc as a cover and use it as a shotgun for airsoft purposes, depending on how much power output it has. Since the base gun sends .177 pellets out at 425 FPS, it might be possible. Half-darts would definitely make nice slugs for such purposes, considering that’s its intended ammunition.
Overall, this thing looks sweet, regardless of how you use it! The cylinder system reminds me to some extent of cap-and-ball revolvers, though (obviously) these are far easier to swap in and out on the fly. Might get/make one myself in the future!
Im currently looking for a good nerf revolver to potentially paint or mod in some way for a possible joker fan film
Bahahaha, he tossed the Hammershot! Walcom, you crazy man. You should do a comparison between this and the Magpie...just cause.
Now this is the sort of stuff that'll get co2 blasters a foot in the door, I wonder how much they'll sell em for when the final version comes around
Cool shit, one tip though......i wouldn't look down the barrel while loaded, its bad habit and it does shoot pressurized gas and darts over 120 fps.
I just thought of combining the barrel and cylinder of this gun with the firing system of the double strike or hammer strike, could that work?
the etsy link doesn't work
Love that dustforce soundtrack!
Walcom, that's definitely Nerf I can get behind... :P Wish I had a 3d printer.
This this the guy that’s supplying us gamers with a proper armory?
Everyday
Kids getting a lot better at shooting than study. Learning
i wanna like it but many groups not allowing CO2 makes me dismiss it, im pretty sure they wouldnt let me use it at borst at least.
Can you print and review the one on thingiverse?
what darts is he using?
Thanks for brining this to my attention Walcom. 😁 Also really like the way you say “Shot Gun”.😎
"You have a very bright future here"
Other gun:ya like ya didn't throw me away
YoU’rE jUsT a HaMmEr AcTiOn JoLt.
So is the stryfe just a semi auto jolt?
Is the rampage a pump action jolt?
Yes it is
what screw does it use?
The files being public makes this really accessible for making custom-styled revolvers, maybe like Destiny ones. Neat.
Have you seen the play rekt revolver!
This makes me curious how feasible converting a cheap bbgun would be. There are plenty of cheap bb shotguns and pistols out there.
Yeah this might be better, but an upgraded spring magpie is better, also if you buy a magpie, you have 2 options of grip, plastic, or wood, 3D printed wood, and plus it shoots 156 with worker darts, haven't checked shooting waffles, if you wanna load, you load it like an actual revolver by the side like the maverick and strongarm, the best part is,
You can buy more cylinders then having only 1, i have 4 meaning i have 5 cylinders
Will you please tell us if you can fan it?
Hey Devilz has a hammershot cylinder on his store! I wonder if I should buy it..
That barrel makes me think it's holstered in a plastic pouch for some reason. This is undeniably awesome but the downside inevitably (along with any co2 blaster) is gonna be dat operating cost of buying the cartridges. But where else can you get top open swappable cylinders besides a legendfire or extremely modded hammershot? and you can just make more with a printer!
I don’t think a half length dart blaster could replace a full size dart blaster though
Maybe widen/sand where the post goes into the chamber and brass it for a "smoother" action of reloading
I, for one, can't wait to see people make these sorts of things and paint them up.
That's looks really cool
But if a cop sees that sticking out of your holster at a nerfwar
You might end up staring down a different kind of barrel
Your local squirrel population thanks you
Any one have ideas on the FPS on the “nerfed” version? Sounds like it might be more usable for my setting
80-100 FPS.
Probably wont get around to something like this for a while but I'm definitely saving this video for another day.
I can’t stop replaying 0:59
10:28
satisfying tactical fps game reload
RUclips: you said gun!! Demonitized!!
I would say brass the cylinders for consistent dart fit as 3D would vary on dart fitting. The other part I would say leave it as is cuz obviously the gap would expel majority of air out so brassing the other half may lead to jamming. And as well definitely would depend on dart type. Otherwise it looks good, and keep up the vids mate 🤠👍
I have this one maybe I’ll switch the barrels from time to time for more fun
Strong P33 Pereira from Battlefield 2142 vibes!
Should I cowboy load dis revolver or no
What is your favourite nerf blaster of all time (excluding modded and 3D printed)
Anybody notice how he kept putting his hand in front of the barrel and he also looked down it
how loud is it?
But can it be fan fired?
Just had one of these pistols! Gave it to a friend who uses pellet guns. Kinda wonder if i shoulda kept it 😝