@@HalKenyon-p5q glad this helped you out! It’s crazy to me how easily these pins bend. You would think that it would be designed to not allow the harness to plug-in unless they were perfectly aligned.
Thank you so much. You helped me save some money and the unpleasant conversation with some arrogant, condescending tech people. They were ready to take my money but difficult to troubleshoot problems cover on the warranty. Jeep gladiator 2020. This problem didn't let me remote start the car or lock the door with the passenger control panel. Thank you again.
the lock on my drivers door 2019 JL quit working a few months ago. I have NEVER had the doors off or unplugged that harness, but I'll go ahead and check it anyway.
@@FixIt_Mann ok I don’t see a clip it must have came loose. Any chance you could lead in in right direction of what the clip looks like so I can get one
@@bulldawgcards if you look in the second picture here, you can see the clips on each side of the switch: www.quadratec.com/p/mopar/door-lock-switch-wrangler-jl-gladiator-jt-6AC61DX9AC?gad_source=1&gbraid=0AAAAAD_wpjhlfH6HE9c1pcxE1vROXVM2-&gclid=CjwKCAjw9eO3BhBNEiwAoc0-jaCEe7XruVvSZX9C__LrCyDaTWyz0tssAMrKMCxxEHuXg3YkKXbZ0RoCVewQAvD_BwE#&gid=1&pid=2
I’ve had one more issue since this where at first glance, none of my pins looked bent, but when I pulled it off and check again, one was just a little bent and I had to straighten it.
@@PeterDiBussolo yes, it did on mine. Early on, I never had this problem. As much as I take my doors off, I’ve started having issues the last year or so.
Appreciate this video, it helped me resolve an issue on the jeep I just purchased. Found two pins preventing the passenger door switch activation.
@@HalKenyon-p5q glad this helped you out! It’s crazy to me how easily these pins bend. You would think that it would be designed to not allow the harness to plug-in unless they were perfectly aligned.
Thank you so much.
You helped me save some money and the unpleasant conversation with some arrogant, condescending tech people.
They were ready to take my money but difficult to troubleshoot problems cover on the warranty. Jeep gladiator 2020.
This problem didn't let me remote start the car or lock the door with the passenger control panel.
Thank you again.
Really glad this helped you out. I was stumped too and I hate having to deal with the service techs.
the lock on my drivers door 2019 JL quit working a few months ago. I have NEVER had the doors off or unplugged that harness, but I'll go ahead and check it anyway.
I guess it’s possible it could be corroded 🤷♂️
I have a 2019 jlu never had doors off either. Same door, same lock won’t work.
What did you find? I’ll check mine as well.
@@brendahouse8985 I have the same issue on my 2018 JL, front passenger and rear tailgate door stopped working.
Thank you so much.
No problem! Hope this helped.
Questing what holds the front door lock switch in mine is loose and can’t figure how to fix it. You have it loose at 1:04 in the video
@@bulldawgcards it’s just clipped in the door panel. I pried it loose with a small flat blade
@@FixIt_Mann ok I don’t see a clip it must have came loose. Any chance you could lead in in right direction of what the clip looks like so I can get one
@@bulldawgcards if you look in the second picture here, you can see the clips on each side of the switch: www.quadratec.com/p/mopar/door-lock-switch-wrangler-jl-gladiator-jt-6AC61DX9AC?gad_source=1&gbraid=0AAAAAD_wpjhlfH6HE9c1pcxE1vROXVM2-&gclid=CjwKCAjw9eO3BhBNEiwAoc0-jaCEe7XruVvSZX9C__LrCyDaTWyz0tssAMrKMCxxEHuXg3YkKXbZ0RoCVewQAvD_BwE#&gid=1&pid=2
Similar issue here but my passive door unlock handle isn’t working. I checked my pins on the hook up and they don’t seem to be bent or anything
I’ve had one more issue since this where at first glance, none of my pins looked bent, but when I pulled it off and check again, one was just a little bent and I had to straighten it.
@@FixIt_Mann and that fixed the problem ?
@@PeterDiBussolo yes, it did on mine. Early on, I never had this problem. As much as I take my doors off, I’ve started having issues the last year or so.
I have same problem i try this thing too 4-5 time but its not working for me
@@pnjb306 it took me a few tries to make sure the pins weren’t bent
@@FixIt_Mann okk i will try again today. Thank you sir