You beat me to it, I told you about how durable the Bad Boy mowers were and now they have a chainsaw. It maybe a little chainsaw but it’s a Bad Boy. Going to see if my store has one. Thanks for the update.
I'd say yes get the dyno done and I'll say probably around 1.8 hp stock. I'd like to see it hit close to 3hp ported and muffler modded. It sure could use more rpm in the cut. But it's a decent little saw.
Thanks for sharing your saw. I like how it looks, I think from watching you, it would be great for lambing commercially or what I call the serious homeowner. That’s the guy that heats with wood and burns more than a few tanks of fuel a year. lol. I’m curious as to what it would do modified
Nothing like a new saw. Not quite sure about that chain tensioning method though. I'm sure you'll keep us informed about that in the future. Would also be nice if the clutch cover nut was captive. Just little things. Good video.
Looks quite a bit like an Echo or maybe even more like my RedMax gz3600 which is a Zenoah saw basically. I have never used it. I bought it 4 or 5 years ago and its still new in my garage. The RedMax was $350 I believe when I bought it.
@@hardworkingmanoutdoors I would have to go out into the garage to look at the saw. I bought it in 2019 and I never used it but it looks almost identical based on what I remember. The screw to adjust the oiler was snapped off in the box. I had to order a new oiler. You would think warranty would have covered it but they didn't seem to want to help so I bought the part and dropped it off at the saw shop. I could have fixed it myself but he charged me like $20 to do it so whatever and while there he sold me an Echo top handle saw for $40 more. Somebody dropped it off and never came back so I paid the repair bill and I have been using that Echo instead of the RedMax. Pissed me off so bad after getting a brand new saw that I had to fix out the box that I just never used it put it on the shelf lol. I know at the time I saw at the Husqvarna dealer a saw that was the same saw just in orange and it was like $100 more. I remember there being a tag that said Husqvarna and RedMax on mine think it said Zenoah somewhere else on it too but Husqvarna or their parent company owns all 3. Not sure if RedMax saws are even sold anymore now
That general design, has been around a lot of years. Best gess is mabe there thinking a 9k working rpm? . The 272 husqvarna actually had a out board clutch set-up like that one. Its still available new from Brazil. Even the modern 562 clutch is set-up that way.
Im not sure about them horizontal piston saws. I just picked up a Husqvarna 36 and its a pretty good saw. Vevor has a cheap option top handle saw for $120 CAD. Do you know if that saw is made in China? Cheers
lol, I was the complete opposite. She calls me a rule follower. So I occasionally drive against the arrows in the parking lot to show off my wild side.
Bad Boy? How many cc's is that. Ok Heath let's see how it runs and cuts.I was reading how they got their name and an associate got off one of their zero turn mowers and said that's a "Bad Boy", I was looking at the catalog I downloaded and they make everything from hedge trimmers to backpack blowers and all matter of lawn care equipment. Do a muffler mod Heath. Thanks Heath for letting us see how this thing performs.
Stephen, it’s a 30cc saw. Definitely think I’ll get it modded and ported to see what it can do. I’m thinking about trying one of their battery powered backpack blowers too. The battery weed whip I have is pretty impressive.
I notice a few things i don't like right away. I dont like the toggle switch at all, or the chain tesioner. I have a stihl 180 and put a 14-inch bar on it with a full chisel chain, and it's far different saw then the 16-inch bar with a safety chain. I wouldn't mind seeing the bad boy with a more aggressive chain. As far as porting it...waste of money, in my opinion.
@hardworkingmanoutdoors just saying several parts resemble the Zenoah design. Zenoah has sold a lot of chainsaw tech, so not surprising their designs are frequently copied. Some are really good, some copies are junk. So far the Bad Boy commissioned saw sounds like it is a very good design. Hopefully you can put it through its paces and let us know how well it does.
My 3 Aaron Lynch 2511t, s....will smoke that thing and with 1 🖐...do it daily..can remove most trees without getting out my 462,500i...exceptions being large spars ..wich it will do.as well when needed
Go for it brother! Get the port! Chip
Thanks Chip. I am definitely thinking about it.
Thanks for the review Heath, Ive been seeing these on FB and wondered how they were, Looking forward to more videos on it.
That’s what lead me down the rabbit hole to buy it!
Thanks for sharing brother 🙏😁
You’re welcome. Appreciate the comment.
Definitely impressive for a small saw, will be interesting to see how it holds up after several tanks of gas. 👍TCT
I agree. Looking forward to putting some time on it.
Nice introduction and demonstration video 👍 Seems to be pretty powerful for its size. Looking forward to seeing how it wakes up after being broken in.
Thanks Lyle I agree! I wonder how much porting and a muffler mod will wake it up too? Maybe we’ll find out.
I’m very impressed. Reminds me kinda of the echo I have. Good video heath ❤
Thanks Jason so far I like it.
Been wondering about them! Thanks for the video!
You’re welcome, more to come.
@@hardworkingmanoutdoors absolutely! Love your spending habits
Not too shabby at all. The sort of saw you have for limbing etc. Good review. Cheers from HB NZ
I agree. Not a bucking saw but great for limbing, trimming, or habitat work.
You beat me to it, I told you about how durable the Bad Boy mowers were and now they have a chainsaw. It maybe a little chainsaw but it’s a Bad Boy. Going to see if my store has one. Thanks for the update.
I called the other day and the dealer didn’t even know they were available yet. Had it ordered in. So far I’m impressed.
Who makes them?
Nice saw , impressed with it .👍🏻
Thanks Del I was too.
I'd say yes get the dyno done and I'll say probably around 1.8 hp stock. I'd like to see it hit close to 3hp ported and muffler modded. It sure could use more rpm in the cut. But it's a decent little saw.
It's unique.
Yes it is. I like it.
For sure
Nice looking and working saw. Do the port. 👍🏻
Thanks Noel, I’m leaning that way.
Heath,pretty darn sweet for 30cc chainsaw 😮😊❤
Thanks Todd, I agree.
Go for it brother! Get it port chip
I just might! I think it could be a real little monster with some mods.
Thanks for sharing your saw. I like how it looks, I think from watching you, it would be great for lambing commercially or what I call the serious homeowner. That’s the guy that heats with wood and burns more than a few tanks of fuel a year. lol. I’m curious as to what it would do modified
I agree. It’s a nice light saw.
Great video would love to see it on the dyno and see what hp can get out from joes tuning
I agree!
Hi from Virginia good job
Nothing like a new saw. Not quite sure about that chain tensioning method though. I'm sure you'll keep us informed about that in the future. Would also be nice if the clutch cover nut was captive. Just little things. Good video.
I agree. We’ll see how it does.
Cool little saw!👍👍
Thanks Jeremiah.
Looks quite a bit like an Echo or maybe even more like my RedMax gz3600 which is a Zenoah saw basically. I have never used it. I bought it 4 or 5 years ago and its still new in my garage. The RedMax was $350 I believe when I bought it.
Bad Boy teamed up with Maruyama for this saw. Seems pretty nice so far.
@@hardworkingmanoutdoors I would have to go out into the garage to look at the saw. I bought it in 2019 and I never used it but it looks almost identical based on what I remember. The screw to adjust the oiler was snapped off in the box. I had to order a new oiler. You would think warranty would have covered it but they didn't seem to want to help so I bought the part and dropped it off at the saw shop. I could have fixed it myself but he charged me like $20 to do it so whatever and while there he sold me an Echo top handle saw for $40 more. Somebody dropped it off and never came back so I paid the repair bill and I have been using that Echo instead of the RedMax. Pissed me off so bad after getting a brand new saw that I had to fix out the box that I just never used it put it on the shelf lol. I know at the time I saw at the Husqvarna dealer a saw that was the same saw just in orange and it was like $100 more. I remember there being a tag that said Husqvarna and RedMax on mine think it said Zenoah somewhere else on it too but Husqvarna or their parent company owns all 3. Not sure if RedMax saws are even sold anymore now
That general design, has been around a lot of years.
Best gess is mabe there thinking a 9k working rpm?
.
The 272 husqvarna actually had a out board clutch set-up like that one. Its still available new from Brazil.
Even the modern 562 clutch is set-up that way.
Yeah, so far I like it. Hopefully I’ll get some more time to run it soon.
Hello Heath and Rachel well there certainly a pretty little saw😂👍🇺🇸
Yes it is! Thanks guys.
Nice saw
Thanks Robert. First impressions I like it too.
Yes stock saws are always leaving a lot of room for improvement.
I agree. Hoping I can get some time and testing on it then get it ported and modded with Dyno Joe.
I am much more interested in your grapple set up. What is the true lifting capability
Yes
I think o will. Let me get some time on it first.
Im not sure about them horizontal piston saws. I just picked up a Husqvarna 36 and its a pretty good saw. Vevor has a cheap option top handle saw for $120 CAD. Do you know if that saw is made in China? Cheers
YES DYNO JOE...❤
I’m thinking the same!
Dyno Joe!
I’m thinking so too.
work? Run for the hills~!
Lol
It is simply a rebranded echo cs2511 rear handle saw.
I believe it’s a maruyama saw .
That is who Bad Boy partnered with for this saw.
Rachel said she had a thing for bad boys, and that’s how yall met I am guessing? 😅
lol, I was the complete opposite. She calls me a rule follower. So I occasionally drive against the arrows in the parking lot to show off my wild side.
@@hardworkingmanoutdoors i saw you j walk at the bunyan show i was like man he wild’n out over there
@@NickPixelTV lol😂 a lot of people do tell Rachel I intimidate them.
It's a rebranded maruyama mcv31r-14 chainsaw. But almost $30 cheaper and a longer home owner warranty
I k ew they teamed up with Maruyama but didn’t know all the details. Thanks!
Bad Boy? How many cc's is that. Ok Heath let's see how it runs and cuts.I was reading how they got their name and an associate got off one of their zero turn mowers and said that's a "Bad Boy", I was looking at the catalog I downloaded and they make everything from hedge trimmers to backpack blowers and all matter of lawn care equipment. Do a muffler mod Heath. Thanks Heath for letting us see how this thing performs.
Stephen, it’s a 30cc saw. Definitely think I’ll get it modded and ported to see what it can do. I’m thinking about trying one of their battery powered backpack blowers too. The battery weed whip I have is pretty impressive.
I say we give her all the beans give her the full treatment see what she does
I notice a few things i don't like right away. I dont like the toggle switch at all, or the chain tesioner. I have a stihl 180 and put a 14-inch bar on it with a full chisel chain, and it's far different saw then the 16-inch bar with a safety chain. I wouldn't mind seeing the bad boy with a more aggressive chain. As far as porting it...waste of money, in my opinion.
I already ordered a semi chisel chain for it. Curious to see how the chain tensioner does over time.
did pretty fair cutting what looked like dead punky wood.
Wonder if Bad Boy actually makes this saw or just slaps their name on it?
I know they teamed up with Maruyama but not sure if it’s an all new design or not?
Id personally go buy a stihl ms171, ms170, or ms162, and save the extra money
Looks like it's made by echo.
I thought so too but Bad Boy actually teamed up with Maruyama to make it.
@@hardworkingmanoutdoorsmy understanding is Maruyama
It looks like an old echo model tht probably had the patent ran out on it
They teamed up with Maruyama to make it.
It looks like a rebranded echo cs361p
Me either this is my first...
So far for a stock non broke in 30cc saw I like it!
@@hardworkingmanoutdoors I love bad boy...
@@hardworkingmanoutdoors BAD BOY RULES...
What kind of warranty
It has a 2 year residential and 1 year commercial warranty.
Many parts of that saw scream Zenoah clone. Zenoah is well-known brand in Japan.
They actually teamed up with Maruyama to get this saw made.
@hardworkingmanoutdoors just saying several parts resemble the Zenoah design. Zenoah has sold a lot of chainsaw tech, so not surprising their designs are frequently copied. Some are really good, some copies are junk. So far the Bad Boy commissioned saw sounds like it is a very good design. Hopefully you can put it through its paces and let us know how well it does.
@@thefirewooddoctor that’s the plan.
I like the demo
Thanks!
Awesome heads up on this saw. Dose it come in any other sizes.
Not as of now. I’d love a bigger version!
My 3 Aaron Lynch 2511t, s....will smoke that thing and with 1 🖐...do it daily..can remove most trees without getting out my 462,500i...exceptions being large spars ..wich it will do.as well when needed
Another company entering the chain saw market huh? Don’t they realize it’s already been perfected by Stihl. 😂
Personally I'd rather see "leave it stock" like 99.9% of us would be using it
looks like an echo saw rebaged
Watch thoes fingers on that hot muffler when changing the bar or chain! Zssssss😢
Chinese junk with no spare parts available