I happen to like the tt over the belt drive myself, I have been told that belt drive is way better, but the t.t. seem like a more straight foward assembly.
I think Minature did a test like this many years ago when they ditched there metal tail box gears for nylon, none the les very impressive and a good way to get unusual sized tail blades LOL. Regards, Pete.
I wish this kit was good to fit into a scale helicopter like a Bell Jet Ranger. Seems to be a strong enough frame to use a scale shell of a model helicopter. Are the tail rotor blades made of wood or aluminium?
Hi mate. See this was done a while ago now, so is this New Torgue Tube Drive out now? Ive got the trex 600 Dominator and the part number for the tail drive gears now is H60G003XXT, but the reason i got my tail blade grips stuck was because i had to change my tail gears cuz they got ripped when my tail got rapped up with a peace of grass. matt
Hi mate soz to bother you, ive just had to replace my rear drive gears and rushing i put the blade grips on the wrong way, but now i cant get them off, i tried putting them in the freezer to see if they wud shrink allowing me to pull it off but i cant, do you have any ideas mate? thanks matt
Funny.....Its never the pavement (or smooth surface) that takes out my gears. Conduct that second test in some Florida St. Augustine and see if the results are the same.
boa noite eu gostei muito dessa apresentação de você eu tenho um Trex500 e tive que trocar o torque tube drive gear frontal poque tá rosando os dentes dá engrenagem dives em guando e tou a procura de engrenagem dá cauda dianteira dá pobrema você sabe mim falar aonde eu consigo comprar pará o meu desa para Trex500
H45G002XXW Tail drive gear shaft Suggested retail each: NT $ 390 (13.48$) ● Suitable for T-REX 450PRO. ● with HS1298 450 V3 tail shaft drive H45038A metal tail shaft pass tail gear box H45186 Tail Control Shaft gear box ● shaft pass the tail horizontal axis group x 2 ● tail shaft pass long bevel x 2 H45G001XXW 26T M0.6 before the end of the drive gear shaft ● 450E tail the the drive guide wheel group x 2 ● 450E tail shaft pass short bevel gear (26T) x 2 ● 450E tail shaft pass long bevel x 2
boa noite eu tenho o Trex 500 e tou teno muito pobrema com essa engrenagem do toque turbo ela tá quebrando as fresas de mas como eu faço para adquirir essa peça boa e resistente té como você min em forma quê tem dela...
Those poor tail blades! I'm calling tail blade safety services and getting those tail blades into a foster home right away! Such abuse, what bad heli parents you are ;P
I'd like to see the same test with the old gears Or even better, throw the entire block of wood in the blades. Destroy everything except the gears and I think the world would be convinced.
New super strength plastic-steel material Can Align or vendor or injection mold company give out the material. It is dark so maybe PEEK or PVC (uPVC) elastic modulus 1500-3,000 MPa. I would suspect its PVC due to MFG $ Anyone know?
I realize that rc helicopters are an experiment in progress, but I laugh at how some of the rc community vehemently endorse a feature or heli as "the only way to go" and then time passes and what they endorsed they now denounce. It's a very child-like atitude.
wow... Align you sure got the boat rowing.. very very great video and very very very great product.. its a game changer..
I happen to like the tt over the belt drive myself, I have been told that belt drive is way better, but the t.t. seem like a more straight foward assembly.
Awesome, now please correct the 3.8 tail ratio on the 600E PRO and get this back to 4.5 or higher with the MOD 0.8 profile.
Nice table saw you have there!
years later and there still good !!!!!!!!!!!!!!!!!!!! i love my align helis
how can i do to remove the umbrella back gear, collar and bearings? any advice is well accepted. greetings from Italy
I like the 13,000 RPM. I run lower headspeed so this is what I need.
I think Minature did a test like this many years ago when they ditched there metal tail box gears for nylon, none the les very impressive and a good way to get unusual sized tail blades LOL.
Regards,
Pete.
that is the basic design of a grainder !!! awsome
Now that what I call a great test
Be blessed
I wish this kit was good to fit into a scale helicopter like a Bell Jet Ranger. Seems to be a strong enough frame to use a scale shell of a model helicopter. Are the tail rotor blades made of wood or aluminium?
Looks you all made the switch to some nice poly.
Announce these in faster ratios for the 600 and you'll have a line going around the block.
I'd be interested as well as to when these gears will be available.
What is to be gained at having so much torque at a tail rotor?
are you shitting me unreal wow thats really cool cant wait to get one of them holy crap nicely done my friend well done !!!!
Very impressive! I have a T-REX Dominator 600E that only needs 300$ to complete! Will this unit be available for the Dominator 600E!?
If these don't strip will mean the autorotation gears will strip instead ? This mod is needed I stripped two sets of standards in a week on 600 esp .
FINALLY !! About Time!!! Now make em for NITRO application as well as Electric's.
I know they're on the new 700 DFC but they're needed for the 550 V2 and all the other models.
hey great idea... i chop wood with my 550 all the time :D
What short CF injected molded PEEK or SiC Mtl matrix ? or SiC SiN ceramic? I give up what is it?
Is this going to be available for the trex 450 plus.
I want to buy this,, where can i get it? Pl. Give details about it.
when is that going to be available ?
nice, home made table saw. I'll have to try that with metal tail blades... j/k
Hi mate. See this was done a while ago now, so is this New Torgue Tube Drive out now? Ive got the trex 600 Dominator and the part number for the tail drive gears now is H60G003XXT, but the reason i got my tail blade grips stuck was because i had to change my tail gears cuz they got ripped when my tail got rapped up with a peace of grass.
matt
matt barr I have the same heli and I'm wondering if they will work with the 600E Dominator!?!
Would it be also available for the 600E PRO?
Will it be available for the 500 Class?
I know what I'm puttin' in the tail of my T-Rex 500, next. :3
Have these gears released yet?
Does it make it fly better
ok , deviria de fazer pro 550 dfc , pois o meu qualquer triscada no chão quebra as engrenagens !!!
This place reports of breakage of the rear axle, I'm afraid to fly my 700 and DFC happen axle breaks, it already happened to someone more?
???
Hi mate soz to bother you, ive just had to replace my rear drive gears and rushing i put the blade grips on the wrong way, but now i cant get them off, i tried putting them in the freezer to see if they wud shrink allowing me to pull it off but i cant, do you have any ideas mate?
thanks
matt
Got an assault gen2 needs align swap for these, could you post the model numbers for these??
could we see the test done again with the blades at an angle that they would be at when in flight, blades never hit the ground straight ..
Are these gears out yet????
Naice job 👍
HI How about the front drive gear of 470LT ?
Funny.....Its never the pavement (or smooth surface) that takes out my gears. Conduct that second test in some Florida St. Augustine and see if the results are the same.
Inovando sempre! Isso é bom!
2020
boa noite eu gostei muito dessa apresentação de você eu tenho um Trex500 e tive que trocar o torque tube drive gear frontal poque tá rosando os dentes dá engrenagem dives em guando e tou a procura de engrenagem dá cauda dianteira dá pobrema você sabe mim falar aonde eu consigo comprar pará o meu desa para Trex500
H45G002XXW
Tail drive gear shaft
Suggested retail each: NT $ 390 (13.48$)
● Suitable for T-REX 450PRO.
● with HS1298 450 V3 tail shaft drive H45038A metal tail shaft pass tail gear box H45186 Tail Control Shaft gear box
● shaft pass the tail horizontal axis group x 2
● tail shaft pass long bevel x 2
H45G001XXW
26T M0.6 before the end of the drive gear shaft
● 450E tail the the drive guide wheel group x 2
● 450E tail shaft pass short bevel gear (26T) x 2
● 450E tail shaft pass long bevel x 2
Beautiful
They should also make for nitro heli
boa noite eu tenho o Trex 500 e tou teno muito pobrema com essa engrenagem do toque turbo ela tá quebrando as fresas de mas como eu faço para adquirir essa peça boa e resistente té como você min em forma quê tem dela...
When?
need these in a 500 size
Super
WHEN?!
For 600 also?
Those poor tail blades! I'm calling tail blade safety services and getting those tail blades into a foster home right away! Such abuse, what bad heli parents you are ;P
Where do I buy those?
ok iam waiting for trex 550 my favorit...i love this one
Joder....!!! Menudo aparato... Le falta lubricación en piñones secos....
problem here is gears dont strip ,but something else gets dinked!
I Need One for my 700dfc hv!!!
About time!
BRAVO !!
I want to buy
lol son of a bitch
guess ill be in fear of the tail blades more then my main blades now.
excellent upgrade align keep it rocking
Sweet!
That is sooo painful to watch....lol. Great durability though!
The wood under the wood is dampening the punches -.-
Align tail rotor blades r made american tough.
I'd like to see the same test with the old gears
Or even better, throw the entire block of wood in the blades. Destroy everything except the gears and I think the world would be convinced.
Debe ir lubricado con grasa para piñones de teflón...
Looks very imressive!
New super strength plastic-steel material
Can Align or vendor or injection mold company give out the material. It is dark so maybe PEEK or PVC (uPVC) elastic modulus 1500-3,000 MPa. I would suspect its PVC due to MFG $
Anyone know?
Hammer
yeah, nah. It still strips on the grass
Wow
I realize that rc helicopters are an experiment in progress, but I laugh at how some of the rc community vehemently endorse a feature or heli as "the only way to go" and then time passes and what they endorsed they now denounce. It's a very child-like atitude.
Good very good
great now i can make my mill :D
เยี่ยมๆๆ นะจ๊ะ
Se the tail fin vibes o.O
สุดยอด นะจ๊ะ
wow :O
Hi friend I want to buy
so is dangerous to have one!
Hate to see what that could do in the hands of an amateur
バカカ危ない止めろ。