I just got this radio and this video helped me out a lot, thank u so very much for this video, you are greatly appreciated. I've been a subscriber for a long time and you've helped me a lot.Thank u.
I am surprised you did not have one of these impossible to have radios: FrSky Taranis radio! For me DX9 is one of most beautiful transmitters in design! Have a great friday!
That was awesome. Thanks for a very clear and easy to understand video on the latest from Spektrum. Waiting for my new DX7 gen 2 to arrive and this helped a great deal!
i was told many years ago when Brushless motors came that lowering throttle before you bind the receiver to Your plane will give you the best action from Your esc and reduse the risk of motor starting when binding.
Hey Bengt, can you try to use this transmitter to do FPV? Just curious about the range of this transmitter. (I know it depends on the receiver,too) Thanks
I have a DX9 and an airplane with an AR631 Receiver. I successfully set up SAFE select on switch A, then realized that I really needed it on switch B. I've tried everything I could think of to move it over with no success. If you know how to move SAFE from switch A to switch B, please let me know how. THANKS.
Hi ArcticRc, one question from my part; do you fly also large planes with this spectrum transmitter? Such as large 3D aerobatic or Jet models? Or is spectrum limited to parkflyers? Do you now pilots in your environment which use spectrum systems for large planes? I ask, because I am up to equip my large DLE111 powerd 3D plane with Spectrum components and DX9 transmitter. But I am still hesitating... Thanks in advance!
Can you show flight modes where elevator trims may be different for 4 flight modes: launch mode, cruise mode, thermal mode, slow mode, and landing mode.
Hi Sir. I have never done a setup for sailplane. But a good advice is to visit spektrum homepage. There you can download setups for just that way. I can make a video on how to mix if you like that.
A quick question, please: I followed your Dx9 setup precisely, and yet I cannot get my flaps to work at all. Following your tutorial, I have assigned flaps to the GEAR channel on my receiver (Spektrum AR9020), but nothing happens! Any thoughts? Thanks!!! PS: My retracts, set up in Aux2, work fine. Jim in Albany, New York
Start your radio and hold down the scroll button. then chose the model you wanna delete. scroll down to model utilities. click and there you have it. :)
I am confused about what the flight mode or F-Mode function is actually used for. Specifically page 14 of the manual. Can anyone explain exactly how this is useful?
+David Kropff Depends on Your updates. if let's say my radio has been updated and Yours not there can be some interference With sound. but not the Controls.
Robert Kibler when you set up a new model. and get to the wing meny set dual/singel aileron and one or two flaps. go out of the meny and click the scroll wheel . scroll down to flaps an enable it and choose what switch to use and the do the settings.
I just bought the DX9 Black edition, and when it comes, my 1st action will be to Get Rid of that stupid voice. I have flown RC from 1975, over 44 years, and I have NEVER wanted or needed some female voice from within the radio to tell me what to do, or what is coming in 2 minutes. What a stupid idea. I cannot image standing at the flight line with 2 others, flying, and hear their radios saying all this garbage that the guys should already know about. WHY have the voice. It's distracting, and very annoying. I want silence on the flight line, SILENCE. Just the sounds of the motor or engines, or maybe an announcement of "Landing", "Taking off", or "Dead Stick". Nothing else. Oh, and I am NOT the only one. Our members total over 600 members, and many don't like the squeaky commands of a computer female, telling others what to do, and when to do it. If you don't know this, already, you shouldn't be flying!
I just got this radio and this video helped me out a lot, thank u so very much for this video, you are greatly appreciated. I've been a subscriber for a long time and you've helped me a lot.Thank u.
I am surprised you did not have one of these impossible to have radios: FrSky Taranis radio! For me DX9 is one of most beautiful transmitters in design! Have a great friday!
That was awesome. Thanks for a very clear and easy to understand video on the latest from Spektrum. Waiting for my new DX7 gen 2 to arrive and this helped a great deal!
Dave Greathouse Than you very much sir. Im happy that you could use the info.
Just got my DX9, I have a dx8 already but this video taught me a lot. Thanks for making it.
Very nice. Made setting up my first plane with the DX9 a lot easier.
Keep up the good work.
-Ed
For an old guy I learnt so much in so little time
GREAT vid
Thank you
a trick : you can watch series on flixzone. Been using them for watching all kinds of movies during the lockdown.
@Edward Brody Yup, I've been watching on flixzone for since december myself :D
@Edward Brody Yup, have been watching on flixzone for since november myself =)
@Edward Brody definitely, been using flixzone for since december myself =)
@Edward Brody yup, have been using Flixzone for since december myself :)
Hallo. just usual video to set up my DX9
Your video helped a lot thank you
nice radio Bengt happy flying with it
liked , good tutorial
Thank you for this video. It is very helpful, as I am starting out and using this DX9.
+4629dt your welcome sir. Glad i could help
Very cool, great job..Tim
Thanks for the nice setup instructional video. I found it very helpful.
Thank you sir :)
Well done!
Thanks for the video :)
A question, why trim throttle all way down for electric motor ? I never heard about it so i never do that on the DX6i.
i was told many years ago when Brushless motors came that lowering throttle before you bind the receiver to Your plane will give you the best action from Your esc and reduse the risk of motor starting when binding.
Oh ok, thanks again for your answer :)
THANKYOU!!
Hey Bengt, can you try to use this transmitter to do FPV? Just curious about the range of this transmitter. (I know it depends on the receiver,too) Thanks
I have a DX9 and an airplane with an AR631 Receiver. I successfully set up SAFE select on switch A, then realized that I really needed it on switch B. I've tried everything I could think of to move it over with no success. If you know how to move SAFE from switch A to switch B, please let me know how. THANKS.
He does use Spektrum on his big Sbach with a 9 ch power safe receiver
Hi ArcticRc, one question from my part; do you fly also large planes with this spectrum transmitter? Such as large 3D aerobatic or Jet models? Or is spectrum limited to parkflyers? Do you now pilots in your environment which use spectrum systems for large planes? I ask, because I am up to equip my large DLE111 powerd 3D plane with Spectrum components and DX9 transmitter. But I am still hesitating... Thanks in advance!
Can you show flight modes where elevator trims may be different for 4 flight modes: launch mode, cruise mode, thermal mode, slow mode, and landing mode.
Hi Sir. I have never done a setup for sailplane. But a good advice is to visit spektrum homepage. There you can download setups for just that way. I can make a video on how to mix if you like that.
P)lease consider doing more Dx9 instructional videos!!! They are SO useful! Thanks!
im working on it. :)
This transmitter do have low prices in australia ?
(Please reply )
Im from Norway i have no idea Sir
A quick question, please: I followed your Dx9 setup precisely, and yet I cannot get my flaps to work at all. Following your tutorial, I have assigned flaps to the GEAR channel on my receiver (Spektrum AR9020), but nothing happens! Any thoughts? Thanks!!! PS: My retracts, set up in Aux2, work fine. Jim in Albany, New York
Where is choke on and off ?????
I belive you can make your own sound on newer models. But updating sound firmware will also give you more sounds.
im on the ropes between picking this spektrum dx9 or the new hitec Aurora 9x....can you give any advice?
*****
thanks you for the advice brother, appreciate it!
How do you delete a model from memory if we no longer need it?? Thanks.
Val
Start your radio and hold down the scroll button. then chose the model you wanna delete. scroll down to model utilities. click and there you have it. :)
thanks
Good
I am confused about what the flight mode or F-Mode function is actually used for. Specifically page 14 of the manual.
Can anyone explain exactly how this is useful?
When a Model is saved on the SD card are the voice commands also saved?
+David Kropff Depends on Your updates. if let's say my radio has been updated and Yours not there can be some interference With sound. but not the Controls.
Could I please get your Crack Beaver model file for the DX9?
thx
FUTABA THE BEST RC RADIOS EVER SEEN
so why are you watching a setup video for Spektrum?
I dont have a flap system entry on the screen, it goes from Throttle Curve to Mixing. No Flap System. What do i do?
Robert Kibler when you set up a new model. and get to the wing meny set dual/singel aileron and one or two flaps. go out of the meny and click the scroll wheel . scroll down to flaps an enable it and choose what switch to use and the do the settings.
How did u put your name in?
go into system and there you can change the name. system is where you find the serial nr for your radio and so on
Bengt: Please disregard that last question! I solved the problem myself. Thanks!
did you forget to set the value :))
I would imagine people would buy the DX9 over the Taranis just for the reason that the Taranis is no where to be purchased.
I just bought the DX9 Black edition, and when it comes, my 1st action will be to Get Rid of that stupid voice. I have flown RC from 1975, over 44 years, and I have NEVER wanted or needed some female voice from within the radio to tell me what to do, or what is coming in 2 minutes. What a stupid idea. I cannot image standing at the flight line with 2 others, flying, and hear their radios saying all this garbage that the guys should already know about. WHY have the voice. It's distracting, and very annoying. I want silence on the flight line, SILENCE. Just the sounds of the motor or engines, or maybe an announcement of "Landing", "Taking off", or "Dead Stick". Nothing else. Oh, and I am NOT the only one. Our members total over 600 members, and many don't like the squeaky commands of a computer female, telling others what to do, and when to do it. If you don't know this, already, you shouldn't be flying!
It optional Sir. So you will get one of the best radios on the marked and it is quiet.