I really hate all the scale car makers for that. Hopefully someone, someday will teach them a lesson and will have her/his own scale car maker with a screw on each end and make it easy for everyone just to swap the wheels
hey! as a fellow hot wheel customer i just wanted to let you know that the mini pilot holes are also to put a screw into :) it makes it much easier to thread it
When you have more chunk of metal on one half of the rivet than the other, you know that you're in trouble; I experienced this a few times myself. It's a pain....
A small carbide ball or carbide drill bit works best and will eat that metal up. If you customize alot it's worth the money and keep it cool with some oil or even just water.
Locutz M some people tap the posts for screws to go in but i just use a little super glue... only downside is you cant open it up after unless you drill again
Hi. I recently got into this hobby. I borrowed my dad's Dremel to open up my rx7 but it doesn't seem like I'm making any progress. I also asked my dad to help me drill but he also made no progress. If anyone knows what's wrong, I would really appreciate it if you could tell me how to do it correctly. Thanks.
Power is NOT everything! I have been getting better results with a hand driven drill bit in a hand grip than a drill. As for your tool of choice in the video congratulations getting one that worked. I bought the same one from good old Harbor Freight and it would NOT even power up! The worst part is when I returned it the guy looked surprised that I actually expected it to work.
Now I have learned there is a ring and to drill straight. Instead of sitting I think now I will use a table to get a straighter drill movement. Thanks man.
The best tool to use would be a small drill press from Harbor Freight and have a small vice attached to the work table. You would be able to make clean straight holes.
I thought your video was great. The only question I had was how do I know if I have a metal or wood one? I have some hard time opening mine and I had a drill
Fun fact You can use the cheapest drill with a good name brand drill bit and you will enjoy this hobby more. Please don’t use cheap harbor freight drill bits.
Danielle Millman there are a few things you can do. The easy way would be to super glue them back together or you can get self tapping screws i dont remember the exact size at the moment but i will repost here soon... but you can screw them back together
This video is old and was using an weak dremel . I have since upgraded and now use a drill. 123 please see my latest video using drill ... thanks for watching
Got a Hotwheels the other day, very nice body with a nice shade of green and tons of stickers, how I like them. But the seats are banana yellow, and so effin ugly. It's a single piece of plastic, as usual, so I just wanna paint it black, or even tan, but banana yellow is just too much.
You definitely need to learn how to use tools before doing a video, never grab the business end of anything, and then you had your bad on the power end, and that razor, take care of that cars paint when taking it apart, even if your going to repaint the body you still don’t want scratches in it. And I hope your wearing glasses of some sort.
Jaime Vasquez the reason it was 9 minute is because he was being helpful and saying what he used and getting prepared so really it would take around 3 minutes
I destroyed my nissan skyline by trying to put nail polish on its tailights tried to remove then with vipes and it destroyed one of my shinning rim, I am deviated that nissan skyline from fast and furious was a rarer piece...
God I wish they would make it simple for us and just put two screws on each end. Phillips But no they want to make us struggle.
CashRulez Dollas haha this is true 😩
I really hate all the scale car makers for that. Hopefully someone, someday will teach them a lesson and will have her/his own scale car maker with a screw on each end and make it easy for everyone just to swap the wheels
Frfr
Its because they dont want you to open it
No, it's because of cheaper and faster production process 🤦🏻♂️
Imagine putting mini hydraulics inside 😂
Just put little springs lmao
liljay jt lmao
That would be sick😂
Little motors
Tomica cars have it
hey! as a fellow hot wheel customer i just wanted to let you know that the mini pilot holes are also to put a screw into :) it makes it much easier to thread it
Indeed my friend 🤙🏽
And i never asked what your IG is if you have one for your customs
You can find me @3rdeye_diecast 🤙🏽
the pre-drill is to drill the post and tap in treads to add screws for refitting body to chassis and easyer for future customising
I just glue
🔥🔥🔥🔥
Anybody else notice that he was drilling in reverse.
How funny.
Magic!
Congratulations for 970 subscribers
Thank you!!
No problem
When you have more chunk of metal on one half of the rivet than the other, you know that you're in trouble; I experienced this a few times myself. It's a pain....
TOM indeed
Yeah. I just f*cked up my ice charger. Idk what the f to do. I litterally messed up the base.
Bit size 1:54 I agree but only tried once.
Awesome!!
Skuf ykk sheesh that’s a gem right there 🔥🤘🏼
💯💯💯
Good job it really helped!
Awesome!
Great job! It’s not easy and it takes practice. Well done👊🏻
Thanks bud!
Dude you definetly *USED A HAND DRILL*
That's a harbor freight bootleg dremel........
No i used a cheap dremel from harbor freight
Same difference.(Lol)😊
@@GMO--ge4ir Definitely not. Just a rotary tool with a drill bit attached...
Its a dremmel
Wohoo!
Yeeee! 🤙🏽
I left my like and my comment because you just gain another subscriber great video man thank you for sharing from California a huge hello to you man
HuntingHotWheels247 thank you man i appreciate the support...check out my IG @3rdeye_diecast
Skiff ykk in the cut 👀
Yeee! You see it 😎💪🏽
A small carbide ball or carbide drill bit works best and will eat that metal up. If you customize alot it's worth the money and keep it cool with some oil or even just water.
Definitely! I have since upgraded since this video! 💪🏽💪🏽💪🏽
How do you put it back together though ?
Locutz M some people tap the posts for screws to go in but i just use a little super glue... only downside is you cant open it up after unless you drill again
You sure make something that easy look hard.
Lol this is an old video when I first started I have since evolved. Thanks for watching though. 😘
come on guys we need to get this awesome guy to 1000 subs we can do it
💙💙💙
Thanks so much i bought a hot wheels and it was like tilted of the base
Sweet!
I just purchased a Dream Van XGW. Rear tires aren’t the best, and could stand replacing. This only has one clear bit on the underside.
Awesome ! Some casting will only have one rivet but most will have 2
I have a small bit, and it’s good to get started, but it doesn’t get any bigger
You need to use the 9/64 bit in order to completely take apart.
Hi. I recently got into this hobby. I borrowed my dad's Dremel to open up my rx7 but it doesn't seem like I'm making any progress. I also asked my dad to help me drill but he also made no progress. If anyone knows what's wrong, I would really appreciate it if you could tell me how to do it correctly. Thanks.
damonchaywj I’m going to try to make another video soon subscribe this way you can stay posted
Like he said they aren't all equal. Try drilling the 55 Chevy Belair base isn't great drilling on.
Enjoyed the vid
Thank you!
I dont have a drill the only thing i have is a few pack of scredrivers and 3 glues
I dont think thats gonna cut it :(
@@3rdeyediecast644 well i did cut a few cars with a flat head screw driver
Nice man
Thanks bud!
But can you put the car together without it falling apart?
put superglue on the bottom, or drill the pilot hole into it and thread a tiny screw into the hole :)
Yes with a pilot hole and screws see my IG page @3rdeye_diecast
Can i do this on a normal hot wheels which isnt custom?
Absolutely!!
Hmm. 🤔 5/32. Got it.
💯
What type of drill did you use
Im using a 20 Volt Black&Decker now. Here is the link to my new updated video
ruclips.net/video/BtWV7Ct8jbg/видео.html
@@3rdeyediecast644 Is it this type of drill you use ruclips.net/video/U1O0MeG7HiM/видео.html
My thumb is now bleeding uncontrollably and my hot wheels is now on the other side of my room
🤣🤣🤣 🤷🏽♂️ new video much better take a look.
Power is NOT everything! I have been getting better results with a hand driven drill bit in a hand grip than a drill. As for your tool of choice in the video congratulations getting one that worked. I bought the same one from good old Harbor Freight and it would NOT even power up! The worst part is when I returned it the guy looked surprised that I actually expected it to work.
Yeah this video is old now i have since upgraded to a drill works great. Watch my newest video im using it there
Now I have learned there is a ring and to drill straight. Instead of sitting I think now I will use a table to get a straighter drill movement. Thanks man.
Wooo!! Awesome ! Yes straight is definitely the key ...glad i could help! Thanks for watching i need to put up a new video using my drill now
The best tool to use would be a small drill press from Harbor Freight and have a small vice attached to the work table. You would be able to make clean straight holes.
I use a hand held drill now much better
Are you suppose to drill into the car or pulling it out?
No just the rivets
That skufone throwie tho
Steve R you know!
What brand of drill bits??
Brand does not matter just make sure not wood drill bits
I thought your video was great. The only question I had was how do I know if I have a metal or wood one? I have some hard time opening mine and I had a drill
Well its either metal base or plastic you will definitely be able to tell
How can i take apart my lionel racing car?
Hmmm thats a good question ive never done one of those
Nice skuf sticker, that's a gem💎🔥!!
Indeed 😎
Fun fact
You can use the cheapest drill with a good name brand drill bit and you will enjoy this hobby more.
Please don’t use cheap harbor freight drill bits.
Lol this video is 4 years old now, i have since updated many things my bro. But i thank you bud….You follow me on IG by the way .. @3rdeye_diecast 💪🏽
Do you have an updated video? @@3rdeyediecast644
Use a heat gun from harbor freight you heat the pin and they come off neatly
Oh aight very cool imma see if i try that in the future 🤙🏽
Thats boring but still luv it
🤣🤣
Where’s the mini one that was inside
and how can i do for remake it. _.
I want to do a repaint on two old dairy deliveries the blue buggs bunny and the white York peppermint. 3D Botmaker sent me to other channels to learn
🔥🔥🔥🔥
How do you put it back
Danielle Millman there are a few things you can do. The easy way would be to super glue them back together or you can get self tapping screws i dont remember the exact size at the moment but i will repost here soon... but you can screw them back together
You need a sharper bit for starters, wholy crap! and a cordless drill.
Lol this video is old I have definitely got a better bit and a cordless drill now check out my latest video you will see
Thx bro
Thank you for watching!
you crazy yes
🤪🤪🤪
YOUR DRILL BIT IS >> Dull >> *It,
Needs Sharpening. My drill bit takes about 3 seconds...
This video is old and was using an weak dremel . I have since upgraded and now use a drill. 123 please see my latest video using drill ... thanks for watching
Can u post a ling to the dremmel please?
Hardeep Rahil i dont have the link offhand but go to www.harborfreight.com
9 64 srill bit
Yes 👍🏽
Who else drilled through the bonnet
Lol!
Time to prove my parents wrong
🤣🤣🤣🤣
So a "Drill Master" is not a drill, but a Dremel. Got it.
Hahah dumb right lol
Gosh, that dremel is loud!
It is!! I hated it! I have a new video up now using a drill
i have the same hot wheels as the video
Awesome!!!
You can use a dremmel, but at a lower speed., on this video it was too fast.
I agree, i use a drill now new video up if you want to check it out
Also just starting out.
I HAVE a drill,& I can tell you,it ain't easy,AT ALL‼️😒
Is your,umm,"DREMEL",cordless?🤭🤔
GMO-1974 no it plugs into the wall..
Do what you got to I take mine's apart with a screw driver
eduardo torres oh wow nice!
eduardo torres how?
Damn, i really need to know
#usescrewforhotwheels
👇
I do now this video is very old
Got a Hotwheels the other day, very nice body with a nice shade of green and tons of stickers, how I like them. But the seats are banana yellow, and so effin ugly. It's a single piece of plastic, as usual, so I just wanna paint it black, or even tan, but banana yellow is just too much.
Hahaha yeah hit it with a black would look good! 💪🏽
am i the only one how tries to take it apart by my teeth and my nails
Saqib Sayyed yeah
Yes you are the only one and you will never be able to do it that way
🤣🤣🤣
This car is a plastic body with plastic base?
HWED Hotwheel-Ed no metal body plastic base
Привет круто. 👍👍👍👍
🔥🔥🔥
Mine doesn't get apart
Really? Make sure the ring from rivet is totally removed ... i have a new video up take a look
What do you write??
🤐
Does it click on
Chris Cruz yes it has a switch
👍👍👍💯
🙏🏽🙏🏽🤙🏽🤙🏽🔥🔥🔥
Yeah that's what happened to my sports gruppo car
💯💯
This man take so long i wish there was a more simple way
⏳⏳⏳
Are you gonna do a corvette??
kching consulting eventually yes i will. I have a few projects in line. Do you have any Corvette you like in particular?
But yet again how do you put it together!😂
A few ways sometimes they snap back together , you cal also use super glue in rivet holes, or the best option is to drill pilot holes and use screws!
Exacto
🤙🏽🤙🏽🤙🏽
over 8 minutes long to show how to drill the 2 screws out???
Thanks for watching all 8 minutes! 💙
*So you get your 17 inch 500 dollar drill*
Lol drill was $30 new video is up check it out!
I got hot wheel car
Awesome!
You definitely need to learn how to use tools before doing a video, never grab the business end of anything, and then you had your bad on the power end, and that razor, take care of that cars paint when taking it apart, even if your going to repaint the body you still don’t want scratches in it. And I hope your wearing glasses of some sort.
Mike Kennett thanks for your concern but no issues here though. over a year now and countless cars have been opened still have all my fingers lol
Really 9 minutes to drill out two rivets 🤦🏽♂️
Jaime Vasquez normally its less that 1-2 minutes.
Jaime Vasquez the reason it was 9 minute is because he was being helpful and saying what he used and getting prepared so really it would take around 3 minutes
How not to use tools for 9 minutes
When you were a kid and did the water bottle thing with your bike 3:29
🤣🤣
Which dremel?
Rendered Rex was a cheap one i got from harbor freight $5
MATE! what the fUK waz that!
? Not sure what you mean ?
Waaaaaay too much backstory and unnecessary info.
Thanks for watching ! 😘
This video could be thirty seconds.
Thanks for watching !
Why do u wanna take apart ur Hot Wheel
To customize
Sounds like my dad 🤣💀
you talk to much just do the job!!!
I prefer when people talk when doing a tutorial
Thank you!! I agree!
Thanks for watching ! 😘
They’re called rivets. And they suck. I restore real cars for a living and I encounter them on some stuff.
Yes rivets indeed ... in this case a 9/64 drill bit handles them well... i made a mew video using a drill as opposed to a dremel enjoy
@@3rdeyediecast644 I’m not concerned how to drill them out I’m sure I can do that, it’s getting them back together again after that I wanna know first
What #
Latest Video with Updated tools.
ruclips.net/video/BtWV7Ct8jbg/видео.html
Can you you yous Anything else
No the dremel is the bare minimum you can use. I now use a 20V drill now which makes it so much easier . I will post a new video soon!
Please use some of your RUclips money to buy a drill
🤣🤣🤣🤣 this video is old I have since upgraded! Lol
Oi
🔥🔥🔥🔥
I destroyed my nissan skyline by trying to put nail polish on its tailights tried to remove then with vipes and it destroyed one of my shinning rim, I am deviated that nissan skyline from fast and furious was a rarer piece...
😭😭😭
P
Q
Stop
Go ?
Bro get to the point!
@@brandonc1740 thanks for watching 😘
You talk too much before doing anything lol
Lol thanks for watching 😉
U talk a lot
🗣🗣🗣