From what I can tell the riser pictured is actually components from two separate part numbers. Here is what I found: dl380p riser with 2x PCIe x16 connectors: 662525-001 (does not come with the metal GPU cage pictured in this video). dl380p riser with 1x PCIe x16 and 1x PCIe x8 connector: 728536-001 (comes with the double-width GPU cage). There seems to also be a 2x PCIe x16 with a GPU cage: 710727-001 similar/related parts: HP DL380p/560 Gen8 3 Slot PCI-E Riser Kit: 653206-B21 HP DL380p/560 Gen8 2 Slot 2x16 PCI-E Riser Kit: 653208-B21 HP DL380p Gen8 Double Wide Riser Cage Kit: 662885-B21 HP DL380p Gen8 NEBS Conversion Cage Kit: 707865-B21 HP DL380p Gen8 Double Wide Graphic Processing Unit Drive Cage Kit: 728543-B21 HP DL380p Gen8 Double Wide Slot1 Riser Cage Kit: 752803-B21 HP 150-W PCI-E Power Cable Kit: 669777-B21 HP 225-W PCIe Power Cable Kit: 728539-B21 HP PCIe 10pin to 2x6pin Power Cable: 757156-B21 source: support.hpe.com/hpesc/public/docDisplay?docId=emr_na-c03235291
I installed the tesla m40 using the power cable shown in the video, but the card was not recognized in ubuntu or in the bios. This was on a proliant g8 with 2x750w power supply. Eventually I got it to work. The steps I did: - Updated the bios via ILO (you need to enable ilo in the bios, specify an ip adress, set up a username and connect ilo port to the router) - Used linux drivers from the nvidia website - Enabled 4g encoding in bios (press ctrl +a to enter the menu) After all of this the gpu was still not recognized. I put the server in performance power mode and the card finally got recognized
For this Server Typ you need for Proc 1 on the right Side the GPU cage with part Number 752803-B21. With bending a part of the cpu 1 cooler mount and get rid of the server mainboard handle, you can install 2 GPUs in this typ of server.
I know this is an old video, but I'm piecing together to purchase one of these and planning to put my k80 in there. I noticed quite a few differen blower options, and I noticed you set yours in there as well. But is there adequate space of putting a blower on there without removing the plastic protector for the memory?
How do you have your bios configured? I have an HP DL380 G8, and the bios doesn't even recognize the card, nor does the operating system. Also the G8 GPU Entitlement Kit, does not provide the right power adapter. In your video you use an adapter to go Male to Female to the power kit, I don't have this power cable, but what is the part number also?
I am trying to replicate this using a DL380 gen9 + Tesla P100 + 800w PSUs + Pcie 3 X16 Slot riser + gen9 cable, but I get "Server Critical Fault (Service Information: Power On Fault, System Board, AUX/Main EFUSE Regulator 1 (10h))", do you have any hint on what could be going wrong here. Thanks in advance!
So if you had a single slot card like a P400 you could get away with adding it correct? I'm about to repurpose a number of GL380's and wanted to get a card in them for Plex transcodes.
What wattage is your PSU? I´m trying with a K80 in a DL560 gen8 and can´t power on the card. If I connect and external PCIe to the tesla (comming from an external PSU powered on) it can detect it. Otherwise is impossible. I have redundant 750W PSUs..
@@makafre Yes. You need to bypass the power directly from the PSU. Soldering the cable to 12V pins. It is not a perfect solution, but I discovered HP doesn´t power the GPU via the raiser. So itś the only solution.
@@FongangDassiJean Uhm, Using 3 slot PCI riser. I think the model number is: HP 662524-001 . Bare in mind, there is 1 full size PCI-E slot and 2 8x slots. These risers are quite common and cheap as well.
@@FongangDassiJean I'm only using the GPU in one slot until have found a good source of dual gpu risers. However, the GPU supports multiple slots and just have it in singular slot atm.
@@CTOSERVERS Power supplies when redundant like this don't multiple power right? Its meant for fail over. Correct me if I'm wrong. I have a 750w, I'm thinking I was sent a bad cable if your configuration works without issue. Thanks for the reply
I have a gen9 of this machine, put a M40 in it and all the lights blink, im guessing its that power cable i was using. In a few days i get to try again.
thanks for sharing I am happen to be doing the same install , only I am working on a (HP NVIDIA QUADRO M6000 24GB MAXWELL GPU) and trying in a ProLiant DL580 Gen9, but is not coming up, I see you are using a riser and wonder that is what I am missing in my install? the server side has a block in the power connectors with 10hole adapter to insert power cables, but I see your riser comes with that connection, can you share the part number for your riser ? I need to see if maybe that is what my problem is. thanks anticipated
@@CTOSERVERS I was able to connected, actually in my ProLiant DL580 I didn't need the raiser, I had to use special power cables but It worked , Linux was able to see it and the machine is fully functional .( I had to use one side of the power cable and and adapter for the power block on the server side) I wish i could upload picture☺
Hi , Yes these are quiet. Windows 10 works fine however a lot of drivers need to be installed manually and is very time consuming. We would recommend going for the Dell R720 instead , easy to setup and cheaper to get parts.
Great video. Quick question. I have a HP Elite 8300 SFF Small Form Factor Business Desktop Computer, Intel Quad-Core i7-3770 3.9Ghz CPU. Is it possible to add the Tesla P100 GPU to it?
-1-your psu is a 240w....the gpu is 250w -2-sff not enough place inside for a gpu so big, the cpu is in front the pcie port and the tower pc support only low profile -3- the motherboard is non standard, and is incompatible with regular tower pc -4- the psu is non-standard too, you need to convert an atx psu to make it compatible with a hp8300 sff your best bet is an e-gpu... so you need something like that : EXP-GDC v8.5 mPCIe version + your gpu + tower+ atx PSU + StarTech 1x PCIe to mPCIe adapter
Hello, great video! I'm going to put a tesla t4 graphics card on the dl380 g8, but I can't figure out which thermal solution will be optimal. Are there enough fans available or is it worth buying a blow adapter or something similar? What kind of usb fan model is shown in this video?
@@TheRealMrRoboto 750W PSU , Yes as mentioned that GPU bracket ( riser ) is optional and does not come as standard. Part numbers shown in the video. You may pause it to note it down.
@@nipegunno, there is no such hidden menu in bios. My config is: same riser with two x16 pcie slots, x2 e5 2697 v2, 2 different but not original cables 10pin - 6pin, also updated a server with special script from hp for v2 processors and no luck, don't have power from riser . Who can suggest me what to do
Will the SL250s G8 also allow this Nvidia P100 GPU? I know the spec sheet only says it allows Nvidia K40. But if this works with DL380p G8, will it work for SL250s G8 also??? Thanks
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
From what I can tell the riser pictured is actually components from two separate part numbers. Here is what I found:
dl380p riser with 2x PCIe x16 connectors: 662525-001 (does not come with the metal GPU cage pictured in this video).
dl380p riser with 1x PCIe x16 and 1x PCIe x8 connector: 728536-001 (comes with the double-width GPU cage).
There seems to also be a 2x PCIe x16 with a GPU cage: 710727-001
similar/related parts:
HP DL380p/560 Gen8 3 Slot PCI-E Riser Kit: 653206-B21
HP DL380p/560 Gen8 2 Slot 2x16 PCI-E Riser Kit: 653208-B21
HP DL380p Gen8 Double Wide Riser Cage Kit: 662885-B21
HP DL380p Gen8 NEBS Conversion Cage Kit: 707865-B21
HP DL380p Gen8 Double Wide Graphic Processing Unit Drive Cage Kit: 728543-B21
HP DL380p Gen8 Double Wide Slot1 Riser Cage Kit: 752803-B21
HP 150-W PCI-E Power Cable Kit: 669777-B21
HP 225-W PCIe Power Cable Kit: 728539-B21
HP PCIe 10pin to 2x6pin Power Cable: 757156-B21
source: support.hpe.com/hpesc/public/docDisplay?docId=emr_na-c03235291
What is the GPU cage for?
I installed the tesla m40 using the power cable shown in the video, but the card was not recognized in ubuntu or in the bios. This was on a proliant g8 with 2x750w power supply.
Eventually I got it to work. The steps I did:
- Updated the bios via ILO (you need to enable ilo in the bios, specify an ip adress, set up a username and connect ilo port to the router)
- Used linux drivers from the nvidia website
- Enabled 4g encoding in bios (press ctrl +a to enter the menu)
After all of this the gpu was still not recognized. I put the server in performance power mode and the card finally got recognized
For this Server Typ you need for Proc 1 on the right Side the GPU cage with part Number 752803-B21. With bending a part of the cpu 1 cooler mount and get rid of the server mainboard handle, you can install 2 GPUs in this typ of server.
I know this is an old video, but I'm piecing together to purchase one of these and planning to put my k80 in there. I noticed quite a few differen blower options, and I noticed you set yours in there as well. But is there adequate space of putting a blower on there without removing the plastic protector for the memory?
What's part number for the power cable?
What kind of screw bit (T4, T6 e.t.c) you use on the riser card ?
How do you have your bios configured? I have an HP DL380 G8, and the bios doesn't even recognize the card, nor does the operating system. Also the G8 GPU Entitlement Kit, does not provide the right power adapter. In your video you use an adapter to go Male to Female to the power kit, I don't have this power cable, but what is the part number also?
Hi , PN you will have to google or pause the video to see , BIOS is default and no issues
I am trying to replicate this using a DL380 gen9 + Tesla P100 + 800w PSUs + Pcie 3 X16 Slot riser + gen9 cable, but I get "Server Critical Fault (Service Information: Power On Fault, System Board, AUX/Main EFUSE Regulator 1 (10h))", do you have any hint on what could be going wrong here. Thanks in advance!
Same issue here, have you found a way to resolve it?
hey I had same issue and found out it was due to the power cable. Also try to upgrade BIOS and firmware via SPP that might help
Have you tried configuring RTX6000 48GB X 2 units in. DL380 Gen10 servers?
Hello I need to know what is the bios configuration to enable GPU to be the primary display
I'm trying to get an M40 working on a DL320e but the option for 4g decoding is missing from even the advanced menu.
So if you had a single slot card like a P400 you could get away with adding it correct? I'm about to repurpose a number of GL380's and wanted to get a card in them for Plex transcodes.
Yes , single slot should work without this optional riser.
What wattage is your PSU? I´m trying with a K80 in a DL560 gen8 and can´t power on the card.
If I connect and external PCIe to the tesla (comming from an external PSU powered on) it can detect it.
Otherwise is impossible.
I have redundant 750W PSUs..
did you succeed? I am having the same issue with a DL380 Gen9 and 800w PSUs
I‘ve read often, you need 2x 1.100W PSU Upgrade - same failing with Tesla M60 on 2x 750W PSU
@@makafre Yes. You need to bypass the power directly from the PSU. Soldering the cable to 12V pins. It is not a perfect solution, but I discovered HP doesn´t power the GPU via the raiser. So itś the only solution.
Does P40 works on DL380p Gen8?
I have been using the GPU riser the server came with, and had no idea they make dual 1s. Shame they're rare as hens teeth.
How? with a dual slot card?
@@FongangDassiJean Uhm, Using 3 slot PCI riser. I think the model number is: HP 662524-001 . Bare in mind, there is 1 full size PCI-E slot and 2 8x slots. These risers are quite common and cheap as well.
@@StuffJason437 This means you have a single slot GPU?
@@FongangDassiJean I'm only using the GPU in one slot until have found a good source of dual gpu risers. However, the GPU supports multiple slots and just have it in singular slot atm.
What size power supply do you have on this? I'm getting a PS1 light and don't really understand why. Am I out of bounds for the rated wattage?
2 x 750w
@@CTOSERVERS Power supplies when redundant like this don't multiple power right? Its meant for fail over. Correct me if I'm wrong. I have a 750w, I'm thinking I was sent a bad cable if your configuration works without issue.
Thanks for the reply
@@sethoz22 yes for redundancy only
did you find a solution? I am having the same issues with a gen9 and 800w PSUs
Just out of interest sake, does anyone know if the GPU cable for the HP ProLiant DL380 Gen8 will work in the Dell PowerEdge R720?
nope
om kalo install drive ngga terbaca itu gmna ya seri HP DL380p Gen 8
where can i find that cable you use in the video? the 10 pin to 8. thank you
Google / eBay / Amazon
I have a gen9 of this machine, put a M40 in it and all the lights blink, im guessing its that power cable i was using. In a few days i get to try again.
did it work for you after changing the cable?
thanks for sharing I am happen to be doing the same install , only I am working on a (HP NVIDIA QUADRO M6000 24GB MAXWELL GPU) and trying in a ProLiant DL580 Gen9, but is not coming up, I see you are using a riser and wonder that is what I am missing in my install? the server side has a block in the power connectors with 10hole adapter to insert power cables, but I see your riser comes with that connection, can you share the part number for your riser ? I need to see if maybe that is what my problem is. thanks anticipated
Hi , We have a video on the DL580 G8 with GPU's have a look at that and the same procedure is for the DL580 G9
@@CTOSERVERS I was able to connected, actually in my ProLiant DL580 I didn't need the raiser, I had to use special power cables but It worked , Linux was able to see it and the machine is fully functional .( I had to use one side of the power cable and and adapter for the power block on the server side) I wish i could upload picture☺
That's BS @@CTOSERVERS There is no video about the DL580 Gen8 on this channel
Hi, My DL380P cames with the 2nd riser you show in this video and i need the first. where can i buy that riser?
Hi ,
You can google the PN and find it , there are some on eBay.
Hi, Could you tell me where could I buy the pcie riser card? Thank you!!
eBay is the best option ,
I cannot find the cable name and PN, can You please write down the supply cable specifications ? Thanks in advance
Pause the video where we show the cable , the PN is on the cable
Have you tested with any non HP GPU’s?
i really dislike how the GPU sits against CPU #2's heatsink bracket, idk what HP was thinking when they made that dumb part of the design
Here's a recap from leaked documents:
$$$$$$$$$$$$$$$$$$$$$$$$$$$$
wow is it THAT QUIET?
could barely hear it.
can you easily get win10 on it? drivers etc?
Hi , Yes these are quiet. Windows 10 works fine however a lot of drivers need to be installed manually and is very time consuming. We would recommend going for the Dell R720 instead , easy to setup and cheaper to get parts.
@@CTOSERVERS thanks for the info.
Will look up r720.
Great video. Quick question. I have a HP Elite 8300 SFF Small Form Factor Business Desktop Computer, Intel Quad-Core i7-3770 3.9Ghz CPU. Is it possible to add the Tesla P100 GPU to it?
Not sure sorry
-1-your psu is a 240w....the gpu is 250w
-2-sff not enough place inside for a gpu so big, the cpu is in front the pcie port and the tower pc support only low profile
-3- the motherboard is non standard, and is incompatible with regular tower pc
-4- the psu is non-standard too, you need to convert an atx psu to make it compatible with a hp8300 sff
your best bet is an e-gpu...
so you need something like that :
EXP-GDC v8.5 mPCIe version + your gpu + tower+ atx PSU + StarTech 1x PCIe to mPCIe adapter
Hi! Good video! Do you know my options for GPU install in the 25 SFF model of the DL380 Gen8?
Hi ,
Should be the same as this
Could we install GPU on DL345? it is like 380 but single socket config.
If its like this then yes
Hello, great video! I'm going to put a tesla t4 graphics card on the dl380 g8, but I can't figure out which thermal solution will be optimal. Are there enough fans available or is it worth buying a blow adapter or something similar? What kind of usb fan model is shown in this video?
Get a extra fan , T4 is passive cooled and needs air.
I Have HPE DL380 G10 is it the same Cable with NVIDIA TESLA P100?
G10 uses a different part number cable
@@CTOSERVERS Which part number cable?
Same power cord for a g7 dl360?
Not sure
Hi I have this server is there a fix for esxi 6.5 passthrough. when i do the passthrough on k620 the server freezing on me thanks
Hi ,
Not all GPU's are certified with VMWARE
@@CTOSERVERS Well the cards work on Dell r720 esxi6.5 but not on a HPE!
Would a 6+2 power cable work?
HP have their own proprietary 10 pin power cable.
The DL380p G8 has Xeons v1 or v2?
The board will be a LGA2011 so v1 or v2
Supports both
@@CTOSERVERS I know. I asked because in specs it is stated that only v2 processors support GPGPU.
@@matuscavojsky3082 Yes GPU only works with V2 CPUs
What is the riser?
The cage we added the GPU in
@@CTOSERVERS Need the HP Part number - mine is NOTHING like that. what Wattage PSU do you have in also?
@@TheRealMrRoboto 750W PSU , Yes as mentioned that GPU bracket ( riser ) is optional and does not come as standard. Part numbers shown in the video. You may pause it to note it down.
Hi can share part number for it ?
This is not working, cos I have exactly the same riser, power cable and gpu and it does not work... it is cos hpe dl380 gen8 doesn't have 4g encoding.
You can activate it in the BIOS.
press CTRL+A to activate the hidden service options, and activate 64 bits pcie subsystem.
@@nipegunno, there is no such hidden menu in bios. My config is: same riser with two x16 pcie slots, x2 e5 2697 v2, 2 different but not original cables 10pin - 6pin, also updated a server with special script from hp for v2 processors and no luck, don't have power from riser .
Who can suggest me what to do
Maning eth?
Customer using for Scientific stuff ....
Hola me podrias donar 1
I followed all steps of installation v100 to 380p gen8 and got error 12 in my video card
Will the SL250s G8 also allow this Nvidia P100 GPU? I know the spec sheet only says it allows Nvidia K40. But if this works with DL380p G8, will it work for SL250s G8 also??? Thanks
Hi ,
Yes they should do