I have used this cutter at an exhibition and really enjoyed it I will have saved up for the 1020 version by January every Rubi fan needs one of these it goes through porcelain like butter
Ok. The side square and lateral stop should not be coming loose. If you give us your email address or phone number and the city where you live, than we can have somebody contact you to offer technical support.
@@RUBITools hello I have spoken to technician & gave my details. But nobody is getting back to me after promising a spare part. Think I’ll sell TZ and get a Sigma
Hello. Who did you call? It is difficult for us to help you here in the youtube comments, but if you give use a form of contact (email or phone number), than we can contact you through more efficient means and resolve your problem.
Hello. That depends on what your needs are. You can find all the information on these machines at the web pages below. www.rubi.com/es/cortadoras-manuales-tx-rd9 www.rubi.com/es/cortadoras-manuales-tz-r636
En Perú puedes contactar con nuestros distribuidores : - Sodimac - Maestro - Promart - Hipermercado Cerámico Con ellos puedes comprobar disponibilidad de productos y precios. Saludos cordiales.
Do you mean 3cm thick? If so, than you should get an electric machine. If you mean 3mm thick, than this machine is more than sufficiently strong. You could get away with using a less powerful one in fact if you're only cutting 3mm thick tiles.
@@RUBITools Yes, 3 mm thick, the thing is that I hawe a job of 300 m2 floor tiles 120x60x8 but also 120x60x3 about 150 m2 wall tiles. I mostly use sigma machines, but for something like this, your brand recently came to my attention and it seems that your machine has the best chance of doing this job. The only thing is that I have to order through amazon because here in Germany, where I live, there is no representative for your tool nearby.
We assure you that you can find a RUBI distributor in Germany. Contact our german offices. They will be able to tell you what distributor to call and they will be able to help you choose the best tool for the job. Krahnendonk89 Mönchengladbach 41066 rubideutschland@rubi.com +49 2161 4781260 +49 2161 4781269
नमस्ते। आप हमें किस शहर और देश से लिख रहे हैं? namaste. aap hamen kis shahar aur desh se likh rahe hain? Hello. What city and country are you writing us from?
We buy it tZ1300 . and the first time we cut 1 cm of paving, we have a problem that the cutter does not cut straight. The cuts are frayed and slightly chipped. The problem is in the storage of the carriage bearings, that they have space. We thought we were buying a quality product, but for the money it is a bargain and we will try to return it unfortunately :(
Hello. It sounds like you might have bought a product with a defect. See if you can exchange it for another new one. These cutters come with a guarantee so if it's new you will be able to replace it.
Below you have the contact information for our distributor in India. New Bombay Hardware Traders Pvt. Ltd. Plot-107, Sector-23, Janata Market Road, Turbhe, Navi Mumbai, Maharashtra, India, 400705 Telephone: +912227833331 rubi@elmec.net
En Perú puedes contactar con nuestros distribuidores : - Sodimac - Maestro - Promart - Hipermercado Cerámico Con ellos puedes comprobar disponibilidad de productos y precios. Saludos cordiales.
Below you have the contact information for our distributor in India. New Bombay Hardware Traders Pvt. Ltd. Plot-107, Sector-23, Janata Market Road, Turbhe, Navi Mumbai, Maharashtra, India, 400705 Telephone: +912227833331 rubi@elmec.net
Hello Joseph. Are you looking to buy anything besides the TZ? Can you tell me your email address or some other maner to contact you? With this information I can have our Sales Executive contact you. He will be the best person to help you with this.
Hola Joel. Si nos contactas via teléfono, email, o Facebook, podemos darte la información que buscas y ayudarte a comprar una TZ. RUBI TOOLS USA Inc. 3317 NW 97th Avenue 33172 Doral (Florida) - USA Phone. 1 305 715 9892 Fax. 1 305 715 9898 E-mail: rubitools.usa@rubi.com Facebook: facebook.com/RubiToolsUSA/
wait a minute, you start cutting, but you made small movement when you start, then push push push, a the end you used knife twice at the same point - gives you better results?
Hello Mike. Yes. It is best to mark twice at both ends of the tile. This helps because these are the points where the tile is most likely to break incorrectly.
I have used this cutter at an exhibition and really enjoyed it I will have saved up for the 1020 version by January every Rubi fan needs one of these it goes through porcelain like butter
I'm glad you had such a good experience with the TZ!
Indian price TZ 1800
@@RUBITools
The choice of the professional tilers...
Day two using rubi tz 1300 oooo its nice I need an 850 now as well for amaller jobs
Happy to hear you're having a good experience with the TZ! 😁
Perfect cut !
I find it hard to do repetitive cuts, the set comes loose very easily on large tiles.Rubi TZ 1300 any advice
Hello. It sounds like you might have a technical problem and we'd like to help! What do you mean by "the set?"
The side stop and square, that tightens to give you repetitive cuts
Ok. The side square and lateral stop should not be coming loose. If you give us your email address or phone number and the city where you live, than we can have somebody contact you to offer technical support.
@@RUBITools hello I have spoken to technician & gave my details. But nobody is getting back to me after promising a spare part. Think I’ll sell TZ and get a Sigma
Hello. Who did you call? It is difficult for us to help you here in the youtube comments, but if you give use a form of contact (email or phone number), than we can contact you through more efficient means and resolve your problem.
What is that rate?
Bought one today nice 👌 ☺
TZ or TX who is higher model?
Hello. That depends on what your needs are. You can find all the information on these machines at the web pages below.
www.rubi.com/es/cortadoras-manuales-tx-rd9
www.rubi.com/es/cortadoras-manuales-tz-r636
Que medida tiene y cuanto cuesta en cdmx
Aquí tienes toda la información de la TZ www.rubi.com/es/cortadoras-manuales-tz-r636
Hola en lima Perú dónde encuentro la tz 1550 me interesa
En Perú puedes contactar con nuestros distribuidores :
- Sodimac
- Maestro
- Promart
- Hipermercado Cerámico
Con ellos puedes comprobar disponibilidad de productos y precios.
Saludos cordiales.
Can this cut 3 mm tick, 1200x600 mm tiles ?
Debating to get this or wet electric mashine...
Do you mean 3cm thick? If so, than you should get an electric machine. If you mean 3mm thick, than this machine is more than sufficiently strong. You could get away with using a less powerful one in fact if you're only cutting 3mm thick tiles.
@@RUBITools Yes, 3 mm thick, the thing is that I hawe a job of 300 m2 floor tiles 120x60x8 but also 120x60x3 about 150 m2 wall tiles. I mostly use sigma machines, but for something like this, your brand recently came to my attention and it seems that your machine has the best chance of doing this job. The only thing is that I have to order through amazon because here in Germany, where I live, there is no representative for your tool nearby.
We assure you that you can find a RUBI distributor in Germany. Contact our german offices. They will be able to tell you what distributor to call and they will be able to help you choose the best tool for the job.
Krahnendonk89
Mönchengladbach 41066
rubideutschland@rubi.com
+49 2161 4781260
+49 2161 4781269
Where can i get some in Ghana
Jamal Hassan Company
jhcltd@yahoo.com
00233-302669983
En Tudu. Kojo Thompson Road, Accra.
How much i need one piece from Saudi Arabia
Isko kaha se khareed skte hai sir g batao jara hame
नमस्ते। आप हमें किस शहर और देश से लिख रहे हैं?
namaste. aap hamen kis shahar aur desh se likh rahe hain?
Hello. What city and country are you writing us from?
My big tiles keep cracking in the wrong spots
Hello. What are the tiles made of? What scoring wheel are you using? Are you marking consistently and smoothly?
We buy it tZ1300 . and the first time we cut 1 cm of paving, we have a problem that the cutter does not cut straight. The cuts are frayed and slightly chipped. The problem is in the storage of the carriage bearings, that they have space. We thought we were buying a quality product, but for the money it is a bargain and we will try to return it unfortunately :(
Hello. It sounds like you might have bought a product with a defect. See if you can exchange it for another new one. These cutters come with a guarantee so if it's new you will be able to replace it.
@@RUBITools Is it possible send you email with problem ? We are already unhappy with her and the seller's attitude Thank you Lukas
Yes. Send an email to clubrubi@rubi.com in which you indicate your country and a summary of the problem.
Were to buy in india,kerala
Below you have the contact information for our distributor in India.
New Bombay Hardware Traders Pvt. Ltd.
Plot-107, Sector-23, Janata Market Road,
Turbhe, Navi Mumbai, Maharashtra, India, 400705
Telephone: +912227833331
rubi@elmec.net
Сколько такой стоит?
I nedd one for my work.i am argentina
Rolando puedes contactar con nuestro distribuidor: Kalydon Tools.
Saludos cordiales.
Oh ho thank's
Precio para peru
En Perú puedes contactar con nuestros distribuidores :
- Sodimac
- Maestro
- Promart
- Hipermercado Cerámico
Con ellos puedes comprobar disponibilidad de productos y precios.
Saludos cordiales.
Are u sales in India
Yes
@@dharmeshyadav6752 i need one
Where can i borrow it?
Below you have the contact information for our distributor in India.
New Bombay Hardware Traders Pvt. Ltd.
Plot-107, Sector-23, Janata Market Road,
Turbhe, Navi Mumbai, Maharashtra, India, 400705
Telephone: +912227833331
rubi@elmec.net
Please order Link
Hello. If you want to order the machine, I can tell you about distributors that you can contact in your country. Where are you writing us from?
@@RUBITools Kindly recommend your distributor in Kenya. Eagerly waiting. Cheers!
Hello Joseph. Are you looking to buy anything besides the TZ? Can you tell me your email address or some other maner to contact you? With this information I can have our Sales Executive contact you. He will be the best person to help you with this.
@@RUBITools Contact me on WhatsApp at +254706329767
Yo quiero comprar una....está súper diseñada......wow. La necesito en dos semanas....área de Los Angeles California.....
Hola Joel. Si nos contactas via teléfono, email, o Facebook, podemos darte la información que buscas y ayudarte a comprar una TZ.
RUBI TOOLS USA Inc.
3317 NW 97th Avenue
33172 Doral (Florida) - USA
Phone. 1 305 715 9892
Fax. 1 305 715 9898
E-mail: rubitools.usa@rubi.com
Facebook: facebook.com/RubiToolsUSA/
@@RUBITools 2 f k rate bolo sir
2 f k rate bolo sir
wait a minute, you start cutting, but you made small movement when you start, then push push push, a the end you used knife twice at the same point - gives you better results?
Hello Mike. Yes. It is best to mark twice at both ends of the tile. This helps because these are the points where the tile is most likely to break incorrectly.
Top de top👍
Merhaba makinanın fiyatı nedir Türkiye İstanbul'a günderme şansınız varmı saygilar
Bu kişiye bir e-posta gönderin. Size fiyatı bildirecek.
Sr. Burak Demir, burak.demir@dmrmakine.com.tr
हे मशीन की क्या रेट है
नमस्ते। आप हमें किस शहर और देश से लिख रहे हैं?
Hello. What city and country are you writing us from?
The price of the machine, please, is better.
What city and country are you writing us from?
صناعة وين
This might just be my least favorite snapper of all above 48 inches.
Glad you like it so much!
Hm
Dont press that f*****g handle so hard,, its unnecessary, your knife life is 60% short with that kind of cutting.. be gentle don't press too much.
To jest sprzęt,mam tx ale łamacz za słaby
lets see you cut one inch off that last tile pls now that's a real test other pro tile cutters can do.
richard peatmont it will do it ... mine will cut down to 5 16ths on half inch tile