Solved - Primo Portable Electronic Water Pump
HTML-код
- Опубликовано: 21 сен 2024
- i Fix iT !
We found the common issue with Primo Water dispenser, where pump stop charging or charging and charger is turn off because interruption in the circuit. 3:37
These items are discontinued and you can't find them more in the store, they seam to be nice units, but all probably have same issues that we trace all over internet, and that is malfunctioning in circuit due to space between two commutator bars
So see if this guide can be an easy fix for you.
If you have a desire to support my channel as a token of gratitude, with your support it is much easier for us. bit.ly/ThankMe... Thank You
A bit about this unit:
Now your whole family can enjoy the delicious taste of Primo® water in home or on the go with the new Primo® Portable Electronic Water Pump. Enjoy its compact size and low profile at home fitting under or inside cabinets as a small water dispenser or take it on the go as a portable water dispenser for camping, picnics, sports outings and tailgating events. The Primo® Portable Electronic Water Pump also features a long-lasting lithium ion battery that dispenses up to 25 gallons on every charge and comes pre-charged right out of the box. Switch to a healthy lifestyle with Primo® Water: recent studies have shown that bulk water users drink 25% more water. With a Primo® Portable Electronic Water Pump, you can enjoy refreshing water at the push of a button with this water bottle pump at home or on the go. The Primo® Portable Electronic Water Pump offers a unique design and has features that make your life easier. For example, the water bottle pump has a micro USB charging port, which allows you to charge on the go, an LED indicator for charging and dispensing and its flex probe that fits on any size bottle. The materials that come in contact with the water you drink are BPA-free certified. Primo® Portable Electronic Water Pump uses 3-5-gallon bottles, which reduce waste from single-serve bottles and filters while doubling as a small water dispenser and a portable water dispenser. Always have water wherever you are with the Primo® Portable Electronic Water Pump!
Long Lasting Li-ion Battery, dispense over 25 Gallons with every charge
Pre-charged works right out of the box
Universal micro USB Charging
Dispenses water while charging
Flex Probe fits any bottle size, designed for 3 to 5 gallon water bottles
Dishwasher safe removable probe and spout
Stainless Steel spout
LED indicator light
BPA free materials that come in contact with water
110V AC power adapter included
Dimensions: 11.8" x 5.9" x 3.5"
Bottle Not Included
Specifications
Features
Rechargeable
Brand
Primo Water
Manufacturer Part Number
601244
Manufacturer
Primo
Assembled Product Weight
1.4 lbs
Model
C55
Condition
New
Assembled Product Dimensions (L x W x H)
5.12 x 4.10 x 9.52 Inches
CUSTOMER SERVICE:
U.S. - 844.23PRIMO (237-7466)
Home & Office Delivery - 800.728.5508
Monday - Friday, 10:00AM - 6:00PM ET
Primo Water Corporation
4221 W. Boy Scout Blvd.
Suite 400
Tampa, FL 33607 Follow me on Creatorland: www.creatorlan... Discover Inspire Connect Collab
Follow me on Linkedin: / goasfarasyoucansee
Follow me on Facebook: / travoriumlifestyle
Get free resorts stay every year www.travorium.c... at #Travorium : and Save 40~70% on traveling
Follow me life on Instagram: / goasfaras_youcansee
Travel with me all over on my Travel Instagram: / travoriumlifestyle
![Shenseea - Dating Szn (Options) [Official Music Video]](http://i.ytimg.com/vi/eUePmZFIXUg/mqdefault.jpg)
I shook well my primo pump and its working again. Thanx for the advice, comrade. 🎉
@@PETER8227 You are welcome.
You are clever to figure out how to fix this product. I am not an electrician and won't waste my time trying to fix junk made by Primo. The issue with my Primo pump is that about 10 seconds after dispensing water, the pump sprays out a few ounces of water. I'm taking mine back to the retail store to swap for one that works properly.
Good idea.
Also they can send free replacement, if you wish to save more time.
primowater.com/contact-us/
Thank you so much for this video! Your solution fixed my pump and you saved me $30.
Just spotted your reply, it been busy year, I'm glad I could be of service to you. If you have a desire to support my channel as a token of gratitude, with your support it is much easier for us. Bit.ly/ThankMeViaPayPal 👈 And Thank You 👌
Great video and yes it worked again.
Good to hear, welcome back and thank you for supporting our channel!
Will be trying this🤞 thank you
I know you can, you can also try to boil 7% vinegar instead of water
I just smacked mine and start working again
😄🤣
I just purchased this unit yesterday, and it didn't work right out of the box (wasn't fully charged like the box says), I charged it ALL night, but it still isn't working. I held the button down and felt a very slight vibration, almost as if the brushes were trying to move. Still not working. I wonder if shaking the unit a few times would move the brushes inside the motor?
Kind late response. Yes you can spin it left and right clockwise counterclockwise.
Let me know if you did anything. How the story ends up
How did you fix it? I couldn't see it in the video. I felt the same way.
Sorry for the late response. If you watch video again you will understand what happening
In my case the answer is brush motor stop at position with no contact in the circuit 3:37 , sometimes the circuit board or wiring could have an issues, if pump is dropped soldering from moving parts can get loose, witch is could cause brake in the circuit, any bad connections could lead to that as well.
Would be helpful if you showed disassembly. I can't get the top part off the unit.
I should record it you are right. But it is easy.
Disconnect water tube, remove 4 screws, next is easy - use old cc card or hotel door card, to pry it open. You won't brake any, just when separating a part do not pull hard, as there is wires connecting top and bottom, and you will need to pull the plug inside.
And again, there is nothing to hold it together, but 4 screws at the bottom
I did what you said, but when I connected it better right it still went back to blue light no water pumping sound
Make sure all plugs inside are plugged, and they soldered to the board well, could be power loss. When you call support, they send free eeplacement, usually arrives in 4 days
If you have a desire to support my channel as a token of gratitude, with your support it is much easier for us. bit.ly/ThankMePayPalLink Thank You 👌
It’s garbage, my first 1 worked for 5 months, then I bought another 1 which was dead out the box, exchanged for the third 1 and guess what - dead, lights are blinking inconsistently, but no go
Issue is simple, pore assembly. Components not sturdy, but overall system is amazing.
Send these to me 29588 I will fix them, but anyhow, they would replace it for you again and again.
On mine the blue light flashes and doesn't do anything. I tried to blow water forward and backwards. Water came out both ways, but it still doesn't work.
Lights flash red while charging so I think that is working.
I opened it up and two of the resistors (R1 & R2) seemed damaged. I found a review on amazon that claims the same thing happened and probably a lot of other people with the blinking blue light.
I also tried connecting the fully charged battery directly to the motor and it didn't turn. So not sure what is wrong, but I think I need a new one.
That is good research!
How old is the unit? Do you still have an receipt?
If you call CUS Support they will replace it with receipt and if it is not to far away in dates.
(844) 237-746
Usually if tube get stack and pump is overloaded it probably burn's. Try to call them if not email me I have 5 pumps, one of them is not working there is nothing wrong with resistors on that one, I can send it to you for $20 goasfarasyoucansee.gmail.com
Manual in case you need: primowater.com/wp-content/uploads/2019/03/601244-Pump-English-and-Spanish.pdf
LED INDICATOR - Flashes red while
charging, solid blue when dispensing
water. Flashes blue when circuit board fails or cable disconnected
@@goasfarasyoucansee I actually already have that exact same manual but I don't see anything about a flashing blue light on it. Anyway, I think I'm going to switch to a full water cooler with either 5 gal bottles or a direct water line. I appreciate the offer, though.
My problem was the pump turned on by itself and all the water came gushing out and got everywhere. I had just taken it out of the box and pushed it only one time on and off. Then a few minutes later all this water came gushing out by itself. Nobody was touching it or anything.
This is very unseen, possibly that circuit board malfunctioning, or simply button get stock, first one is more likely the true. Call support they will replace one free of charge for you. Witch is you probably did!
I just got it from home Depot and it's not working. I even tried to charge it and it's dead. No lights flashing, nothing
You got two options, call support they will troubleshoot and send you new one, you won't believe, for some sort of error, they where sending me for a month 1 every week)) if
Yeah mine is a different model an It also has trouble charging.. but it's hit an miss if it will pump mine also has a detachable tube . An on mine the prongs on the tube don't reach the mother board .. 😑 it just flashes blue ..
take it apart carefully, use magnify glasses, or any other zoom devices, and inspect carefully soldering contacts on circuit board, check all the plugs, battery connections etc.( home the brake is not inside the motor, ( one of the symptoms that you already confirm brake in circuit is come an goes!) Posted back if resolved, good luck, if you need parts, let me know witch one and will more then happy to send you replacement. Got few new spares