Thanks, good explanation!! But I have a question, if it sees an obstacle it moves away from it but only moves to the LEFT. How can we make it move away from the obstacle both to the LEFT and RIGHT? I mean, when we want, to the LEFT and other time to the RIGHT?
Bro please help i want to made this project in proteus software but i m facing issue in proteus software there is not showing GND PINS IN ARDUINO PLEASE HELP BRO
I altered the pins (all possibilities) but I still don't get the proper movements...it's just going in circle. And I don't think the code for the sensor it's right because it never stops..it's moving all the time even when there is no obstacle. I also tried a new sensor but I got the same result. Do you have any suggestions?
Sir I used the same circuit diagram but whenever I connect the Ultrasonic sensor to Arduino 5V then my Arduino does short, In my Arduino there is no power and not upload the code so please solve my problem
Very useful & nice. I got the below error while uploading the program. what should I do? Build options changed, rebuilding all Sketch uses 1988 bytes (6%) of program storage space. Maximum is 32256 bytes. Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
Thank god i found your video to learn , explanation was great as i expected , you didn't make me sleep thank so much , expecting more videos
Glad to hear that!
@@MechStuff what library to use? I'm using phone on Arduinodroid
Thanks, good explanation!! But I have a question, if it sees an obstacle it moves away from it but only moves to the LEFT. How can we make it move away from the obstacle both to the LEFT and RIGHT? I mean, when we want, to the LEFT and other time to the RIGHT?
Bro thank you you helped me a lot . I like how you explain everything unlike the other youtubers .
Glad I could help! ;)
@@MechStuff can you make relay module version?
what library should we use in this programme
You are great man
its our first project of aurd
Can I use Arduino UNO R3 SMD Atmega328P Board - Clone Compatible Model
What is the component which is connected to power socket of arduino
WHAT LIBRARY TO USE?🍊🌽🦠🍇🥥🦠🥦🦠🍇🥥🍏🥥
What library to use I'm using Arduinodroid on my phone
hey bro after complete the connections my left motor is not wroking only right side moter will be start
I have used a 9V battery but motors are not running. Could you please help me to fix this?
Hlo. How to add localisation to this
can i know the power rating of dc motor? that u had used? And rpm too
Sir I wants to make an obstacle avoiding robort but that must work in 4 directions front back left right sir can you tell me who and how can i do
Bro in this which technology is involved
Kindly tell with servo motor respectively
Your source code worked thanks
can it work on 3 tiers chasis
Bro please help i want to made this project in proteus software but i m facing issue in proteus software there is not showing GND PINS IN ARDUINO PLEASE HELP BRO
i'm trying to get the code but it is showing that the site is invalid
Bro, Which technology you have used in this project? Which programming language you used in this project?
Keep it up buddy...Good work
Thank you for your kind words Shubhendu !
hi I have a small doubt does the bot take the right turn if we place obstacle on front and left side
Depends on the code, our code here tells the bot to take left turn every time it detects an obstacle!
idk if u see these comments but can i use python rather than c++ ?
sir please signify the dimmensions of the chassy
I altered the pins (all possibilities) but I still don't get the proper movements...it's just going in circle. And I don't think the code for the sensor it's right because it never stops..it's moving all the time even when there is no obstacle. I also tried a new sensor but I got the same result. Do you have any suggestions?
same happend to me did you manage to fixed it?
@@MrValehp11 not yet
the lights of my Arduino and motor driver are on but the motors are not working
Same case
Same
could you please send me the documentation
This video helped me a lot
LIER
Sir I used the same circuit diagram but whenever I connect the Ultrasonic sensor to Arduino 5V then my Arduino does short, In my Arduino there is no power and not upload the code so please solve my problem
Di we need to install any Library for this project?
S
Which motor driver module have to use L298 or L298N
L298N
pls give the desciption of code
can i use 2 9v battery?
yes
Bro we can make this project with l293d motor driver
Yes, you can :D
Bro can I use two motors and a caster wheel instead of four ??
Yes, sure, why not !
Hello. Pls help me. Can I use 12v battery 7.2Ah for L298N as source? Thank you
Yes Ramos!
Its work sir. Ty
MechStuff Ty sir.
HE WOULDNT HELP U
Hi bro how can I buy the battery can share the specifications of battery with me
there is an error in the code please help me.
Bro add servo with this plase
Very useful & nice. I got the below error while uploading the program. what should I do?
Build options changed, rebuilding all
Sketch uses 1988 bytes (6%) of program storage space. Maximum is 32256 bytes.
Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.
its not error thats a successfully uploaded into your arduino
it is not working sorry but i think your coding or my board is wrong please can you help me ?
HOW TO GET GITHUB LIBRARY ?!!!!!
Bro.....where can we get all these stuff
Any electronics/project shop, amazon or you can get it from the website I've mentioned - www.hitechnology.co.in if you stay in India
Are u sure this will work??
WHAT LIBRARY TO USE MMMMMMMM
Hi please reply i need u r help bro
super
it works
thanks for the car
YOU ARE JUST A FRIEND OF THAT DUDE SO HE CAN GET SUBS AND GET MONEY
sir code is not working properly please help me i want new code . this code is error . send proper code please
Hello Omkar, the code works fine. If there's an issue I'll suggest you to check the connections..
@@MechStuff sir this really works please tell me i have to make it for nu school science fair
Thanks
perfectly working boss, what i have done by seeing you
does your robot take both right as well as left turn during if it senses obstacle
Bro I need
please give me the code for this project means for arduino ide
ok sir. thank you
Ha ha that wheel
Mene v banaya hai
Brother can you make arduino based calculator
HE CANT BECAUSE HE IS AN INDIAN LOSER
i loved the wasted part bro how sad
☺☺☺☺😊😊😊😊😊👍👍👍👍👍
The ultrasonic sensor isnt working on my case and the dc motors are not working at all please send me a working code