Buddy!! when you switch on both the switches there is some amount of light getting on which should not be the case with xor gate. The same is happening with my project also. Why is it so???
Piyush Raj Anand Well buddy, because: A. this circuit is just for demonstration of work. B. if you want to get 0 volts you will need to do some calculations and use other resistors.
Hey! I tried this for a school project but it didn't work out. Could you please help me out? The submission is near and I don't know what to do! Thank you
@@XoftC elaborate how that makes sense. If I am incapable of emulating this same circuit at home based on this video, then how is this of any use to me? All I'm looking for are diagrams on how to construct these circuits so I can play with them myself at home and come up with my own micro-projects. "Going about it all wrong" contrary I would say that you need better lighting and better diagrams because if I could see the circuit (with better lighting) or if I could distinguish the diagram (with better lighting and design) then I wouldn't be having this problem. I came to learn how to construct a XOR gate. I didn't come to the video to learn how to trace circuitry for shorted electronics. I would thank you for the comment, but it did nothing to assist with the issue I'm having.
@@dylankuhn2639 Aren't pull up resistors already there in the circuit you showed. I made it exactly like this but I still get led on when both buttons are pushed
This video doubled as both a very relaxing and informative demonstration
Buddy!! when you switch on both the switches there is some amount of light getting on which should not be the case with xor gate. The same is happening with my project also. Why is it so???
Piyush Raj Anand Well buddy, because:
A. this circuit is just for demonstration of work.
B. if you want to get 0 volts you will need to do some calculations and use other resistors.
Speaking a little would be nice.
+reddead Thank you for watching!
The circuit building videos are used for a specific purpose.
In other videos I provide explanations where needed.
+xoftc I'm definitely subscribing this channel
Hey! I tried this for a school project but it didn't work out. Could you please help me out? The submission is near and I don't know what to do! Thank you
I didn't get it when both inputs were 1 and the output should be 0. Please help.
is it because i didn't use a 330kohm resistor?
i still get light when both push buttons are pressed down. it shouldn't do that according to the truth table.
And with transistors?
The lighting is too dim and that diagram doesn't clearly show me where wires should jump over each other.
If you only follow the wires in this video then sorry to say but you are going about it all wrong.
@@XoftC elaborate how that makes sense. If I am incapable of emulating this same circuit at home based on this video, then how is this of any use to me? All I'm looking for are diagrams on how to construct these circuits so I can play with them myself at home and come up with my own micro-projects. "Going about it all wrong" contrary I would say that you need better lighting and better diagrams because if I could see the circuit (with better lighting) or if I could distinguish the diagram (with better lighting and design) then I wouldn't be having this problem. I came to learn how to construct a XOR gate. I didn't come to the video to learn how to trace circuitry for shorted electronics. I would thank you for the comment, but it did nothing to assist with the issue I'm having.
How much i/P WE have to supply
Bro how many BC 547 did you use
5
What is the supply voltage??
5v
@@labscience8271 9v look at the scammatic
what are these boards called
Breadboard
very interesting I will try.
Video created without AI
This did not work for me :(
Sorry to hear that :(
where did I go wrong, it still light even I've press both push button
did you use pull up resistors?
they are used from the output of the buttons
@@dylankuhn2639 Aren't pull up resistors already there in the circuit you showed. I made it exactly like this but I still get led on when both buttons are pushed
@@dikshapandey2359 Okay, maybe you should use a capacitor connected to the base of the first transistors. At least 300 microFarad
Homeboy's got half a breadboard. o.0
Brad Sumrall I've cut them because it fits the frame shot better and I didnt have a small size at hand :)
That works! ;)
Why you dont speak, are you mute??
Yes
ya kia h itniii wires sara kuch hlwa ban gya h 😐
got it!!!!
Congrats!
Ъ