Extraction of Gold from a bunch of gold plated junk. Gold prospecting ⛏with acids 🧪🙂
HTML-код
- Опубликовано: 13 июл 2023
- eBay link: www.ebay.com/itm/195880108312
www.ebay.com/usr/ak_gold_bear...
I hope my video will help someone understand the process of extracting gold from gold plated metals. If someone decides to repeat the whole process, please do not forget about the safety rules! Thank you for watching. Please support my video with a like. Thank you.
Always enjoy your videos. Thank you again and looking forward to more.
Thanks for the kind words. 🙂🖐
I don't know shit about mixing chemicals or anything like that but i enjoyed watching your process.🤙🏽🍻
Well, I'm glad you liked it. Thanks for the comment 🙂🖐
Well done! This was very informative and makes me look forward to processing my gold plate stockpile. I have just over 3600g of fully plated material just like what you saved up 🙌🏼🙌🏼
Bravo and well done!! 🍺🍺🫶🏼
I separate material with thick gold plating and very thin gold plating. In this bucket, the gold plating was thick. I have now exactly the same amount of other gold-plated material with a very very low gold content, such as contacts from USB wires. I'll be lucky if I can get five grams out of this bucket 🙂 If you decide to extract gold from your material, make a video and share your experience. I think it will great 👌
Thank You for the information.👍
My pleasure 🙂🖐
That was some pretty good scrap !
Thanks grizzly bear🙂🖐
Thanks for the awesome video
Thanks for the comment 🙂 You are the first today! ✌
Good job. Nice and clean
Thank you! Cheers! 🍺🍺🙂
Awesome ! subscribed .. and thanks for being here.
Thanks a lot 🙂🖐
First time doing this I wonder ?? 😮 I liked it very educational..
I'm glad you found something interesting in my video. Thank you 🙂🖐
انت مبدع
Thank you for visiting my small RUclips channel 🙂🖐
Shiny shiny gold bar!
Thank you for spending some of your time on my channel 😉
Gives great Ideas
😎
I really liked your technique of adding water and sulfuric and Nitric right at the beginning. Can you tell me how much the bucket weighed? How much gold did you process? The bucket and the gold together was 3327 grams? Great video! I am guessing 156 grams for the bucket.
Hello. The weight of an empty bucket is 180 grams. The weight of the entire gold plated material was 3147 grams. There were more than one kilogram of gold-plated transistors in the bucket Philco 2N1272, Kt355a and kt632b. I'm sure the most gold I've gotten is from transistors. Thank you for your time on my little channel 🙂🖐
I am glad to see that you sold it on ebay for $1500. I was watching it. I bought the $10 Iron Sulfate. Love your videos.@@akgoldbear7669
Estoi aprendiendo mucho de su material audiovisual estpi recolectando material saludos desde Gran Canaria,
Спасибо, что уделили немного времени моему каналу 🙂🖐 Рад, что вы нашли что-то полезное в этом видео.
thanks for video of gold recovery from electronic waste, awaiting another video for tv's pcb that you said on the above video
When I will scrap about 100 TVs, then I will shoot a video. Now I'm just collecting material. Thanks for watching and commenting 🙂
Good video and Information 👍
I tried very hard 🙂 Thank you ✌
Hello Mr AK. I love your clip. Thank you😊 Arne. Norway
I'm glad you liked it. Thank you for watching 🙂🖐
Hi really enjoyed the video. What concentration are the nitric, sulphuric and hydrochloric acids that you use? Would you recommend this method for ceramic cpu processors or do you think nitric acid would be enough to lift the gold away from them? Seems like using sulfuric and nitric together speeds things up which would be good for me. Don’t want to wait a week for nitric acid to do it’s thing like a lot of people suggest. Thanks in advance 👍🏻
Hello. Glad you liked the video. The concentration of nitric acid is 67%, hydrochloric acid is 31.7% and sulfuric acid is 98%. When I work with ceramic processors I also add a little sulfuric acid, this way the nitric acid starts up faster and the metals dissolve faster. This way you can use less nitric acid. Nitric acid is expensive 🙂
Видео супер! Произношение на английском явно советской школы!
Потому что я родился в СССР 🙂👌
What do you think about use magnesium for precipitate? Its extremely cheap reactive material so could be nice too but im not sure
Man You cracked me up on in between the 2nd and 3rd attempt with the punch... That growl..LOL Preesh! And good job.
Thanks man 😁
Great vid bear!!
Thanks 🙂🖐
Have you tested the purity of your bar with a sigma metalytics pro after you finish making your gold bar? You should make an e-book or video course on all this, you explain it better than others
No, I didn't check. I can guarantee that this is pure gold. 24K. Possibly there is a microscopic micro-percentage of platinum. Or maybe not 🙂
Bear 😎👍👍
Thank you 😉✌
Excellent video bro 👍
Thank you 🙂🖐
Well done enjoyed 😊
I'm glad you liked it 🙂🖐
хорошо учили раньше, видно, что человек не прогуливал уроки химии...
Я пытался поступить на медицинский хотел быть врачом, но так как там главный вступительный экзамен химия я не поступил. Потому что в школе мои знания по химии были на уровне ... Наташка, дай списать 😜
@@akgoldbear7669 но их оказалось достаточно для добычи аурум из электроники... Хотелось бы рентабельность узнать, как оно у вас...?
Wow nice
Thanks 🙂🖐
Cool
I think so too 🙂🖐
can you tell us what gold-plated resistors you had in bucket.Thanks
There were more than one kilogram of gold-plated transistors in the bucket Philco 2N1272, Kt355a and kt632b. I'm sure the most gold I've gotten is from transistors. Thank you for your time on my little channel 🙂🖐
wow amazing my friend, very good video thank you for sharing the video my friend.🤝👍🇮🇩❤️🔔🔔👈👈
Thanks a lot ✌🙂
were you find nitric acid ? i donth have any nitric,and i have abaut 6 kg gold plate pins ?
Do you have sulfuric acid? If yes, then you can make nitric acid and hydrochloric acid from it yourself 😉
Different, but enjoyable
Thanks 🙂
All through Covid Lockdown I was collected computer hard drives, memory, processors, graphic cards, circuit boards and motherboards. I tore down 2800 hard drives I depopulated 159 motherboards and have 26 pounds of memory sticks and flash drives. 190 pounds of processors.
You have done a lot of work! 👌You probably cut many fingers. This happens to me all the time. Two weeks ago, I took apart 11 TVs. Thanks for watching and commenting 🖐
Hey, how did you source this?
👏🏾👏🏾👏🏾👏🏾👏🏾👍🏾 Very good
Thank you. I did my best 😉🖐
Very nice bar
I tried very hard 🙂 Thank you for visiting my tiny channel! 😉🖐
That was a lot of material.
That was a lot of Gold!
Great work.
New sub.
Do you use a stock pot?
Thanks a lot✌What do you mean by asking about the stock pot?🙂
@@akgoldbear7669 may have been traces of gold in solution in your HCl and HNO³ boils.
Just wondering if you implement a stock pot to reduce and capture those little losses.
Now I understand. Yes, of course I always save the solutions for at least one week. Usually, after a week or two, a small layer of gold dust precipitates to the bottom of the waste bucket. Sometimes just gold dust but sometimes dust with tin or lead chloride. You gave me an idea for my next video. I have accumulated a fairly large layer of dirty sediment with gold. Looks like it's time to get some gold out of it 🙂👌
@@akgoldbear7669can’t wait!
Very funny video was even funnier when your aqua regia was a black-green colour I almost laughed
Thank you for spending some time on my little channel 🙂🖐
wooow hi there, you just showed up in my FYP and love
great job and you got 1 more sub from me ;)
regards from sweden
Hello from state of Georgia 🙂🖐
Good show
Glad you enjoyed it 😎✌
Good work bless bto
Glad you liked it. I did my best 🙂🖐
I found out that Gold recovery from old computer parts and TV 's and I ordered the acid and a couple of the chunks of computer pins with Gold and I got just a little bit of gold from it. It was an interesting experiment but I don't think that I would like using the acid all the time because of the smell and the nosey neighbors who ( think ) I have a lot of Gold hidden.
Hello. Curious neighbors are a big problem for me. I work outside in the fresh air and I have to hide what I do from the neighbors. In the video, you can see me covering the table with a large tall piece of cardboard. Only a tall column of nitrogen dioxide smoke I can't hide 😅
we had over 300 old telephone rack circuit boards..used chemicals that scared the crap outa me.took us a week. there was a lot of waste only got 6 frams..this was 15 years ago. I knew there had to be an easier way..thanks
15 years ago the gold content in phones was higher. Now more and more manufacturers are refuse to use gold, replacing gold with titanium nitride. Thanks for the comment 🙂🖐
thanks...and welcome
Excellent video. I learned a lot about the process. How much cost for all the acid and meterials for this batch?
Hello. Acids are expensive, and because of this, I buy in large quantities in bulk. All material is free. I took apart a lot of TVs, phones and computers to accumulate so much material. To collect material it was the hardest part. Everything else is simple and easy 🙂
Хорошие видео
Я тоже так думаю 🙂✌
do you know when your going to have more Sulphate IN stock ?
Hello. Unfortunately I don't have time right now to make ferrous sulfate for sale. I received a private order to extract gold from 144 pounds of gold-plated pins. I need all the iron sulfate myself. For the last two months I have been making iron sulfate every day, even when it rains 🙂
Do you need to use ferro first to neutralize it with urea master? Boil it using HCL, doesn't it affect the gold powder?
I did not use urea because the concentration of acids was low. Hydrochloric acid did not dissolve gold. 🙂
@@akgoldbear7669
thanks master
Trying to learn, but I don’t know all the acids can you use drain opener and lie to recover gold
All drain openers contain sulfuric acid. There are many drain opener manufacturers and they use different concentrations of sulfuric acid. In dilute, not concentrated sulfuric acid, when heated, you can dissolve iron and tin. Be careful with drain openers as a drop of HOT sulfuric acid can burn a hole in your hand to the bone. Always use gloves and keep clean water nearby 😉
Да твоё произношение, не подумай плохого , сразу слышно такой типичный руский , акцент 😅🧐👌👍
Ну чтобы говорить на английском без акцента нужно было родиться не в СССР 😁✌
Но я рад, что родился в СССР 🚩
@@akgoldbear7669 👍👍👍
Where did you get the acid from
Grandma left a legacy 😜👌
What about the platinum and palladium??? Next from waste solution??
I save solutions. I'll check it sometime.🙂
@@akgoldbear7669 stock pot video?
When one was blue amd one green, the solutions, one had palladium or platinum while the other didnt.. about 5:30 minutes in, at least, yhats what another channel said, "sreetips"
Yes it is possible. There was a mix of different materials in the beakers, apparently something was plated with palladium and then with gold 🙂
Can you please tell me the weight of all the scrap before refining it? Also where do you get all these supplies from?
Hello. 2:18
Thank you sir
listen to the boss,,,,, don't forget to stop by for black coffee together... goes duit and goes natural so that you will increase your enthusiasm for work and add brothers thank you very much
Thank you for spending some time on my small channel 🙂
Can i disolve magnetic pins with Cu2Cl ? Copperchloride?
I don't know...
Your gold looks amazing. From this gold i can make beautiful earrings 👩🦰
Thank you. Please teach me how to make earrings😁 I've been thinking about this for a long time.
Wouldn't it be easier, less cost to smelt just after getting all the gold flakes realeased ? What do you do with the toxic chemicals afterwards ?
Dry gold powder melts very quickly. If you melt wet gold powder, you will use more gas. I dump all liquids, sediments and acids into my waste containers. All liquid and acids evaporate over time and only dry sediment stays in the bucket. Soon on my channel I will be extracting gold from my waste container. Thank you for spending some time on my channel 🙂🖐
Couldn't you collect the silver from the waste or is it already completely dissolved?
Very interesting video
Are you using distilled water for any of the process or just tap water?
Amazing yield well done👏👏
Было бы интересно посмотреть где вы берете материал для аффинажа
Там же где и вы, из различной старой электроники. Чтобы набрать это ведёрко больше трёх килограммов мне пришлось разобрать хренову тучу всякого старого хлама. Пример в самом начале ролика 🙂🖐
@@akgoldbear7669 Я немного про другое. Понятно что с электроники. А вот где саму электронику. Покупаете, меняете, находите. Истории о том как электроника у Вас появляется
@@TakoeXobby А понял. Я работаю в трёх отелях и в отелях часто что-то ломается. Например вчера вышла из строя камера наружного наблюдения, сегодня кабельный модем для интернета и кофеварка. В трёх отелях много работников и они постоянно приносят что-то сломанное из дома. С материалом проблем нет, проблема в его переработке так как у меня мало свободного времени. Есть материал 👌но зараза нет времени для аффинажа 😁
@@TakoeXobby gościu bzdury pokazuje , taki materiał w TV ? , bzdura 🤣🤣.
on 6 kg gold plate pins its work salt electrolisis ?
Absolutely yes 👌
wath you will choose ? salt recovery or ap recovery?
@@akgoldbear7669
Salve. Ti seguo dall Italia ma cercavo un tuo vecchio video e mi sono accorto che non ci sono più molti vecchi video! Come mai?
Hello. Yes, I deleted all old videos. I wanted to delete my RUclips channel. It was just a bad mood. 😎
@@akgoldbear7669 nooooooo 😭
@@akgoldbear7669 Io trovo il tuo canale tra i più interessanti! Spero che resteranno i prossimi video.
@@salvo8063 🙂🖐
wow
Thank you for spending some of your time on my channel 😉
where you from bro? good job man. where you living now ?
I'm from the USSR 🚩 Now i living in the State of Georgia . Thanks for watching and commenting 🙂
U obviously have an unlimited supply of acids 😮
I buying acids in bulk. Only in bulk. 🙂
Dear friend and teacher
How do you eliminate the acids before you throw away?
I mean, what do I need to put inside that will stop their action so I can throw up in the toilet..?
And if you could make a video for it that would be wonderful 😊
Thank you😊🙏🙏🙏very appreciate
Everything is easy. Someday I will make a video on this topic, but not now 🙂🖐
@@akgoldbear7669 do you think to mix caustic soda with the acids will solve my problem?
Thank you
I've been asked this before, so I'll just copy the text for you.
I usually isolate even dissolved copper from solutions. Sometimes I use my copper sulfate for my garden. I don't use much nitric acid. I also use urea to neutralize the remaining nitric acid. After removing all the metals from the solution and after neutralizing the nitric acid, I leave the solution for 15-20 days. After 20 days, the bottom of the bucket will have a sediment and dirt that I collecting in my waste bucket. After that, only a little hydrochloric acid or sulfuric acid remains in the solution. Very little. Such a solution will not harm anyone, anywhere. I just flush it down the toilet. Any hardware store sells pipe cleaner drain opener for sinks, all drain openers contain sulfuric acid, this is dangerous! Also they selling muriatic acid for cleaning swimming pools, muriatic acid is a concentrated hydrochloric acid that's really dangerous too. These solutions people use every day and a lot. My acids are not active after processing 🙂
If you think your acids are still active just dilute them well with water. Good luck 😉
@@akgoldbear7669 thank you much dear🙏🙏
These are the videos that will grow your channel. Show us where the gold is, in vintage electronics and crt TV's. You have the knowledge already, your channel will grow infinitely if you continue to teach us. Continue to put content out, that shows us where the gold and platinum/palladium is in electronics. You are the master, you know exactly what pieces contain the precious metals. Your channel will explode with subscribers if you teach us where it's located in older electronics. It's your gift to teach, to share. Your reward will be subscribers waiting for your next video.
Thanks for the kind words. Precious metals are absolutely in all electronic devices. Everywhere! Your idea is good👌 I just have very little free time right now. Thanks for the idea 🙂🖐 I will think about it.
I ts real bro
@@akgoldbear7669agreed I subbed and want to learn more
Love this channel!! I don’t think you are going to be a “little” channel for very long! I subscribed after watching one of your videos and can’t wait for more!!
In which temperature?
Well 🤔today very warm 90 degrees Fahrenheit 👌Summer! 😉
I'd be curious to know if you took the time to calculated how much time and effort it took you over time to reclaim 100's of electronic devices to accumulate that bucket of scrap because time is money. Add cost of various amounts of acid and then add time to extract gold over three days time. Subtract your asking price of $1,500 for the bar and see if it's really worth it. In actuality that bar melt value is only $1,309.48 at todays market price 8/13/23
🙂"because time is money". Hello. It took me many months to collect this bucket with gold plated material. This is my hobby. Just a hobby. I only do this in my free time. I have a full time job and only in my free time from work i extracting gold from old electronics. Someone in his free time likes to drink beer, watch movies. I have a different hobby. Sometimes because my hobby i can earn some extra money. Thanks for watching and commenting ✌
Tell that to people that recycle plastic, glass and aluminum cans. Moreover, I think it would have been safer, cleaner and more environmentally friendly if he smelted it- even if he lost a couple grams in the process.
Привет.
Мне кажется это жуть как вредно для здоровья.
Привет. Это очень вредно для здоровья, вредно и опасно. Нужно соблюдать технику безопасности. Использовать вентиляцию или работать на свежем воздухе. Нужно думать о здоровье каждую минуту и тогда всё будет хорошо 😉
добыча золота из грунта чуть менее опасна для здоровья, а вот дальнейшая обработка опасна...
@@6tamaka9 Поиск золота на речке опасен только если клещ укусит 😅 А дальнейшая работа с песком и кислотами да опасна 🙂
А что полезно для здоровья? Она сама жизнь очень опасна! Каждую секунду есть вероятность отправиться на тот свет! И причин для этого, как минимум миллион! Метеорит, поезд, кирпич, инфаркт! Подавиться можно вкусным и очень полезным обедом! 😀
Just wash the gold sedimen with HCL, dont boil it. When u boil hcl it will disolfe some of your gold again.
Hydrochloric acid does not dissolve gold. Hydrochloric acid dissolves gold only with nitric acid ))
@@akgoldbear7669it will indeed dissolve a little gold but just a tiny tiny bit
Nice color. No towel under your pedestal to avoid the bounce you are getting. I would have liked to seen a more detailed view of the materials before start of processing.
Hello. I divide gold plated material into two groups, those with a good layer of gold and those with very very low gold content. At the bottom of this bucket were a lot of gold-plated transistors that I started collecting a year ago. Most of the gold I got from transistors. Thank you for your time 🙂🖐
Very interesting process.
I am curious though about the economic side of this (as in, the cost of the bucket of scrap, cost of acid, monetary value of end product, etc.). Is it just a nice hobby, or can you actually make a living of this?
Hello. It's just a hobby. It is very difficult to accumulate material for extracting gold. It took me 6 months to fill this small bucket with gold plated material. It is best to spend time on the rivers to prospecting for gold 🙂🖐
@@akgoldbear7669 Hello, thank you for your reply. I did not know it takes so much time to accumulate one bucket. The rivers might indeed be a better option LOL.
@@stijn2472 Yes, on the river in my free time i can find more gold than from electronics. I only do this on weekends. 🙂
@@akgoldbear7669 That does sound like a nice way to spend some time in nature. I'm glad you enjoy it.
Hi AK, how to know if the river contain gold. Can you show or teach how to know the sign of it
Русский акцент )))😅
У меня русско- советский акцент 🙂✌
Can you olease test the solotion after each hydrochloric boils beceause there might be Some gold in solotion after the boils iT wil disolve the gold
Hydrochloric acid does not dissolve gold 🙂
@@akgoldbear7669 please ive seen iT on RUclips trust me
Absolutely never do this without a fume hood system (if indoors)
🙂✌
Услышал ай яй🤔😂
.
Double die obverse! It’s worth more now 😂
😎✌
Ola .mi neymes is nival im from Brasil you cam .me passar informação como se faz isso .gostaria muito de aprender a fazer esse processo. Tanks
Olá. Não entendo muito bem o que você está perguntando. Por favor, escreva em seu idioma nativo.
@@akgoldbear7669 ola meu nome é NIVAL e gostaria muito de aprender a fazer isso você poderia me passar a fórmula. Obrigado
Sou do Brasil.
De que fórmula você está falando. Eu explico tudo no vídeo e escrevo quais ácidos eu uso. Se você tiver material banhado a ouro, verifique se é magnético ou não. Se não for magnético, cubra tudo com água e adicione lentamente ácido nítrico. Devagar. Se o material for magnético, cubra tudo com eletrólito e adicione lentamente ácido nítrico. E às vezes água. Quando os metais básicos estiverem dissolvidos, você precisará coletar os flocos de ouro no filtro e depois dissolvê-los em água régia. 😉✌
@@akgoldbear7669 obrigado .muito obrigado. Seus vidos sao muito bom.
A precipitação e feita apenas com ureia da água regia .
What happened to your video, ""extracting memory RAM IC chips" " ?
I deleted all my videos. I was in a bad mood 😎
@@akgoldbear7669 bummer, that was a good one, funny too with the deer, "why are they always eating 😆"
😅✌ This place is no more. I rented this house. The building was demolished and a hotel is being built there. Deer and bears don't go there anymore 🙂
I would definitely say you’d put gold back into solution at least once if not a couple more times when you did you hcl boil as well as nitric boil.
I always recommend a stannous test. That would show if you’re putting gold into solution or not, or if it was just palladium in the hcl boils.
Chances are you didn’t rinse the HCL well enough before the nitric boils. I would recommend at the least to incinerate your materials after the hcl boil/rinses and even better, in between refines to get more purity. That will prevent any excess nitric from creating agua Regia or excess hcl when switching to nitric. Great video though! Thank you!
🙂👍
The real question is how did you remove all that gold plating from cicuit boards 😅
Easily! 🙂
LOTS OF WORK!! but worth it, in 2023 2024 horrible expensive, society, to live in
Yes, a lot of work. But it's extra money. Gold extraction from gold plated junk is just my hobby. Thanks for watching 🙂
First, you have all the time collecting components , tearing them down to the gold-bearing items. Second, you have all the costs of acids to extract the gold. After you take your labor and supply costs you are definitely losing money by producing only 21 g. You would be better off finding a river and panning for gold, which has little to no cost and you're out in the fresh air.
I understand what you are talking about. What I do is just a hobby. I only do this in my free time. Sometimes I am do gold prospecting on the river, sometimes I extracting gold from old electronics. It's just a hobby. 🙂
@@akgoldbear7669i love this type of hubby
Сразу слышно Русский акцент 😂
Что есть то есть. Куда без него 🙂✌
Слушай ты по русски говори а-то твой акцент тебя выдаёт 🤣🤣🤣🤣🤣🤣🤣
Здравствуйте. В смысле мой акцент меня выдаёт?! 😅 Я ни от кого не прячусь ✌
@@akgoldbear7669 🤣🤣🤣🤣🤣🤣не просто русскую речь можно узнать где угодно слишком чётко проговариваете слова по американски 👍👍👍👍👍👍👍🤣🤣🤣🤣🤣🤣👍👍👍
@@user-jp2nv2zu6n 🙂✌
A fórmula.
...
Please, use some safety goggles, even if you don’t care, the youngsters who will imitate your procedure may get a tiny “splat” H2So4 in their eyes get blind.
4:21 I always ☝ask people to use protective equipment 🤔 always
Are you copying Sreetips...??? 🙂
Nooo 😮 He's copying me! 😜 We have different content. A little similar 😎✌
😂😂😂😂😂 like no one is allowed to put a little effort in to learn and use a new skill and get some gold lmaoooo
@@gdoggmendez23 🙂
@@akgoldbear7669hi i have cpu old intel ceramic philips 1980 also i have ceramic cpu old sony
ruzz ? block
Did not understand you
You needed to filter those solids out at least another couple of times.
The solution was nowhere near clear.. You also didnt remove the excess presence of iron and such before adding the iron sulfate..
Also, the fact you were not checking for gold in solution with stannous tests means you could have potentially lost some gold into your waste bucket.
That gold could be a lot purer if you start the process over again.
Anyway, wtf do I know, nice work getting that gold, thats a lot of work right there!
I save all solutions and dirty sediments. Then, over time, I get out of them everything. Thank you for spending some time in my little channel 🙂
Are you русский?
Я родился в СССР 👌🙂
@@akgoldbear7669 🤝👍💪
As someone that repairs electronics, this had me shaking my head. Do you have any idea how much more gold you could just buy if you repaired electronics and sold them? You waste so much of your time.
This isn't a repair and resell channel. This is for those who are interested in the salvage of old electronics that are at end of life for their precious metals. instead of the metals going into landfill.
@@user-ju7cv1in5s Thanks a lot! Cheers🍺🍺🙂
You are on the wrong channel. This channel is not about repair and resale. A lot of the old electronics that I can fix, I fix and give to people for free. For free! 👌I extract precious metals only from those electronics that cannot be repaired. My channel is not for you. Thank you for your time. I wish you good luck 🖐🙂
Was it worth it? Everything I'm going to do is basic addition subtraction and multiplication and division but it is applied math. If you can apply the simplest math formulas you know a lot more than most people.
21.2 grams of gold x $62.877 (round up to $63) = $1335.60. Not bad
Gold wholesaler will purchase for 50-90% (they need to make money too). Let's pick 85%. $1335.60 x 0.85 = $1135.26. Not bad.
1 gallon of lab grade sulfuric acid with hazmat shipping and taxes $110-140. Let's say $110. $1135.26-$110=$1025.26
And another $100 for the nitric acid and if we're subtract that we're at $925.26
Let's give a conservative estimate of gas spent driving around to get this $25 and another $25 on lab supplies, $875.26 I assume you spent more on gas driving around and gathering things for a long time and getting supplies. I assume your supplies cost more than $25 but let's be conservative.
I also assume you spent way more than 40 hours gathering everything, being apart electronics and extracting the gold but let's say you didn't. $875.26/40=$21.88 an hour.
I worked at USPS for $23 an hour. I worked at the airport for $21 an hour. So many people think that by extracting good they're going to get filthy rich. You never said that but many people believe that. Is it worth?
Hello. I don't drive around looking for old electronics in trash cans. I don't spend money on gas. I have a full time job. Extracting gold from old electronics or gold prospecting in the river is just a hobby. Hobby I do in my free time. I working in two hotels and there is always something breaking. I buying acids in large quantities and only in bulk with free shipping. I buy 93% concentrated Sulfuric acid for $16 a gallon. I buy hydrochloric acid 31% for $8 a gallon. 2.6 gallons of nitric acid 67% for $144. Now if you are a mathematician, count how much I spent on acids. I spent 3400 milliliters of nitric acid, 8250 milliliters of sulfuric acid and 400 milliliters of hydrochloric acid. Good luck! 😉✌
нихрена сказочник....? из телевизоров столько зла ....гари потэр,что тут скажешь...
Я старался👌 Спасибо за просмотр. Скоро выпущу вторую часть гарри поттера. Не пропустите. Будет интересно 👍
@@akgoldbear7669 ну правильно,тебе ж за просмотр денежку капает...а что показываешь, хотя б чюток приближайся к реальности,а то все лохи у тебя подписоты будут
@@JITOMIR Вижу что сделал ошибку, нужно было высыпать всю позолоту на стол и подробно показать что там было. Чтобы у некоторых знактаков специалистов вопросов не было.
@@akgoldbear7669 вот,вот...
Bzdury walisz gdzie w TV są takie piny i tyle 🤣
Who seeks will find.
👍
Thanks 🙂
£1000 not bad for today prices😁🫡
Thank you 🙂🖐