Comica Wireless Dual Lav Review (Range Test, Audio Test, vs DR-10L) - CVM WM300A
HTML-код
- Опубликовано: 12 сен 2024
- Get The Comica Here - amzn.to/3gYYK1h
Gear Use To Make THIS Video:
-Video-
Panasonic S5 - amzn.to/31XDqCm
Lumix 20-60mm - amzn.to/3xQF3ib
Panasonic G85 - amzn.to/2GSVmTC
Panasonic 25 1.7 - amzn.to/3uTU4Lk
VND Filter - amzn.to/3IaQkfF
-Audio-
Tascam DR-10L Lav Mic - amzn.to/3wwxQQt
-Lighting-
The Sun - en.wikipedia.o...
BEST Outdoor Softbox - en.wikipedia.o...
---
Free One-Page G85 Guide - drive.google.c...
Free Cine LUT - drive.google.c...
My LUTs - www.nolangfilmc...
If you use the above kit links to purchase, Amazon will give me a small affiliate commission at no extra cost to you. It really helps to support the channel. Thank you!
Your test of the microphone is professional, love your distance test
Thanks so much Lucky!
Hello Nolan, I purchased the CVM-WM300C 96-Channel UHF set about 2 or 3 years ago. The build qualty was second to none but I sold the kit because the noise floor was way to noisy. I really wanted to like them. For my wirless kit I decided to go with the Sony UWP-D21 and for wired I aslo use the Tascam DR 10L. I am testing out the Diety W. Lav mic Pro with the DR 10L to see if it sounds any better than the Tascam mic. Enjoyed the video. Thanks for sharing.
Thanks so much! Yeah I found a similar issue. I use my DR-10L for 99% of my audio needs 👌🏼
hello I am getting the Comica soon, can you share a video on how to add the EQ. Thanks
is it possible to separate the A and B mic's channels (Left and Right)? I'd like to individual both signals however they are merged despite me being in stereo mode.
What I do is make a copy of the LR stereo track in my editer, then set one channel to the right channel and the other to the left. I think it looks something like “LR, RL” in premiere when you toggle “audio channels”. It’s a bit hard to explain over text. Hope that helps!
@@NolanGunn Thank you! after further testing, I found that the only way to get a left and right channel in-camera ,while using two mics, was to purchase and XLR splitter connecting to input 1 & 2 on my camera - at which point the stereo mode on the receiver worked, separating the two audio signals.
Good to know - thanks for sharing that!
Can you use with your iphone? If so, can you please show me how. I tried but I couldn’t. Thanks
You would need a lighting to headphone dongle along with a cable that has the TRRS (three lines in it I think) that works with microphones. I haven’t tried it with my phone so you may need to look up a tutorial on how to convert.
@@NolanGunn Thank you.
like it😊