Pioneer VSX-LX505 Unboxing & Dolby Atmos Setup | Best A/V Receiver of 2022? New Pioneer AVR!!
HTML-код
- Опубликовано: 18 сен 2024
- Today we check out the new Pioneer VSX-LX505 A/V Receiver. Will this be the best AVR of 2022? 9 Channels, HDMI 2.1, Dolby Atmos, DTS:X, IMAX Enhanced, and Dirac Live?! What more could you ask for? Check it out on Amazon - amzn.to/3K1IF55 - Become a Patron - bit.ly/TDPatreon
Check out my NFT collection - technodad.biz/...
Keep up with content and discounts on my digital products
- technodad.biz/N...
Rent 4K Blu Rays at 4K Blu Ray 4U: bit.ly/TD4KBR4U
Discounted Denon AVRs - amzn.to/2NfNtXs
Discounted Marantz AVRs - amzn.to/2BFYNYb
Recommended HDMI 2.1 (8K) Cables - technodad.biz/...
*My DJ Gear*
Denon DJ SC6000 Media Player - adorama.rfvk.n...
Rane MP2015 Rotary DJ Mixer - adorama.rfvk.n...
Denon DJ Prime 4 - adorama.rfvk.n...
QSC K12.2 PA Speakers - adorama.rfvk.n...
QSC KS118 Subwoofer - adorama.rfvk.n...
Pioneer HDJ-X10 Headphones - adorama.rfvk.net/5bA5yL
My favorite subwoofers:
technodad.biz/REL
2020 Denon AVRs - technodad.biz/D...
2020 Marantz AVRs - technodad.biz/M...
Monoprice subwoofers: amzn.to/33G8iD0
7-Channel AVRs: amzn.to/2DmnMBt
9-Channel AVRs: amzn.to/2PVf2Jl
4K HDMI Cables: amzn.to/2QCi3LW
Budget Range 4K TVs: amzn.to/2JLaf7X
Mid-Range 4K TVs: amzn.to/2zEqdfA
Premium 4K TVs: amzn.to/2qxoRPx
OLED 4K TVs: amzn.to/2R9DRC5
Sony 4K TVs: amzn.to/2QM5YqR
B&O Headphones: amzn.to/2RulKDG
Recommended Soundbars: amzn.to/2SVutDV
DISCLAIMER: This video and description contain affiliate links. As an Amazon Associate, I earn from qualifying purchases.
Check out my recommended products on Amazon: www.amazon.com...
Equipment used to film & edit:
Sony FX3 - amzn.to/3dOyUZR
Sony 25mm F1.4 GM - amzn.to/3xjrplo
Lens I want to try - Sony 35mm F1.4 GM - amzn.to/3gDFft4
Lens I want to try - Sony 50mm F1.2 GM - amzn.to/3dOvd6D
Atamox Ninja V 5" HDR Monitor - amzn.to/3dNRMYY
Rode NTG-2 Shotgun Microphone - amzn.to/3dQowRa
XLR Male to female 1 foot - Blue - amzn.to/3xjrRA6
Sachtler Flowtech 75 Tripod Legs: amzn.to/2KSyqDI
Manfrotto 504HD Video Head: amzn.to/320tzFU
Edelkrone SliderOne V2: bit.ly/2Pbvk1L
Edelkrone SliderPlus: bit.ly/2Pky0KC
Edelkrone HeadOne: bit.ly/2ZnsxWR
Edelkrone DollyOne: bit.ly/33TKHPK
Edelkrone FlexTILT Head 2: bit.ly/2Pkyr7I
Atamos Ninja Inferno 7" HDR Monitor: amzn.to/2N3pM6k
Atamos Ninja V 5" HDR Monitor: amzn.to/2Z8RI09
Tilta Nucleus Nano: amzn.to/2TUKsiK
Godox LED Video Light: amzn.to/2Zbf2dD
Rode Procaster: amzn.to/338cfjA
Rodecaster Pro:amzn.to/2NtK7Rg
Zoom H6 Handy Recorder: amzn.to/2NzSUku
MacBook Pro - www.jdoqocy.co...
iPad - www.jdoqocy.co...
Mac Mini - www.dpbolvw.ne...
iMac - www.dpbolvw.ne...
Thank you for watching!
Don't forget to like and subscribe!
Facebook: bit.ly/TD5FBP
Twitter: bit.ly/TD5TWTR
Instagram: bit.ly/TD5INSTA
Spotify: bit.ly/CDS29YrsS
Soundcloud: bit.ly/DJCDSSC55
Techno Dad Audio Demo Tracks - Tidal: bit.ly/2IxZzKO
Techno Dad Audio Demo Tracks - Spotify: spoti.fi/2Rnv4dv
Little correction, all the HDMI back ports are not equal, HDMI 1-3 is 40gbps, HDMI 4-6 are 24Gbps, Front aux HDMI is only 9Gbps. See page 206-207 of the manual where it does show what each HDMI port supports.
Thanks! Comment pinned so everyone can see!
It’s fair to also mention that the subwoofer 1&2 pre-outs are not independent.
Do we know if Denon 47/3700 models hdmi ports are all hdmi 2.1 or have throughput breakdown?
@@kaiwind from what I remember reading, even the newer Denon/Marantz models that got the board update only have a single HDMI 2.1 input. It's one of the reasons I went with the Pioneer over them.
@@BrandonBaecker
But if it upscales every HDMI output to 8K like the Marantz slimline 7.2 does…does it matter?
Back in the late 80s early 90s Pioneer Elite used to be one of my favorite brands. They made an amazing carousel CD changer and Laser Disc player.
Yeah, I remember my Pioneer LaserDisc player. It was awesome!
If I remember apart from Sony you had little to no choice than to go for the pioneer LDP in the 90s...no competition to judge it by really...
@@TechnoDad Don't laugh. I still have my Pioneer CLD-3090 LD player. Don't you hate it when an item you bought new is now referred to as "vintage"? :-)
I have the first Carousel Pioneer 101 disc player. Still works til this day.. Love random play.
@@dpfreedman Even worse...I just ran through Apple tv 4k movie catalog that are over 25 years old...and I REMEMBER WHEN THEY 1ST CAME OUT 🤯😢😂🤣
My Pioneer VSX-933 is a very reliable and good sounding workhorse. Maybe Pioneer is a bit underrated these days. As soon as I will miss the extra 2 channels or 8K I will definately consider to buy a Pioneer again. I put a lot of confidence in the Pioneer AVRs.
I agree with you about the VSX933 - i loved mine until I decided to upgrade to the VSX LX-505 basically to have more options and future proofing. I wanted the pre-outs to add an amp to get the max from my polk speakers, then i added a tonewinner 7 channel amplifier which was a game changer....
I like Pioneer AV receivers, I've had flagship Yamaha, Denon and Arcam and I found the Pioneer has the most clean and accurate sound.
Nice to see a Pioneer review! I have the LX-502 and have loved it for the last few years, but the lack of preouts has me itching to upgrade. Excited to see the full review video!
Right on, Seth!
Thanks for a shout-out for the remote "magic beans" calibration services! I'm super pumped that you're enjoying it!
I have the LX305, excellent receiver as well. 😊
I was also in the market for the Onkyo but could not get my hands on one so I grabbed the Pioneer from Best Buy. I am coming from a Denon X34ooH, and so far I love this Pioneer AVR. Looking forward to your next VSX-LX505 videos.
My friend, I know you said this AVR does 4K/120… does it do 4K/120/HDR? With HDMI 2.1 who knows what these products will do? 4K/120 (20.5Gbs), 4K/120 with HDR (40Gbs)… great work as always BOOM!!
What's up Home Theater Joe? I will have a video about this next week, I'm hoping. Someone else told me the manual stated HDMI 1, 2, & 3 are 40 Gbps and support 4K/120Hz/HDR. I will test it out over the weekend.
@@TechnoDad Yes it does. There is a page in the manual for changing the inputs. You will need to set them to 8k standard or 8k enhanced to get 4k 120 HDR VRR. Can't remember which setting will get it there, but you'll obviously get max bandwidth from 8k Enhanced.
@@TechnoDad you’re the man brotha!!
@@AstroDeathZombie one of the best handles ever!! 😂🤣 thank you for the information my friend. Yamaha said same about they’re TSR-700, that may be a fib dho… mine is sent of to United Radio at the moment. Will test when I get it back and share with the community… BOOM
@@TechnoDad did you hear the new displays coming this year will be 48Gbs chip? Is this true? Have you heard anything? My gut says there will be more Tom Foolery to come over HDMI 2.1… new consoles with 48Gbs to come sooner than expected maybe? Would love to hear your thoughts on this… js. BOOM!!
This thing looks awesome! .. Seems like a solid contender for the AVR of choice this last while.
Could be!
Excellent review. With the front panel, 120w per channel, and two trigger outs - I would argue this is comparable to the denon 4700 rather than the 3700.
I can see that, but the X4700H is also $500 more and adds Auro-3D. So for me, that's a substantial jump up from the LX505
@@TechnoDad I’m not sure what to think of the aura-3D since there is little content a available and personally my speaker setup isn’t optimized for aura. The $500 price difference makes the pioneer that much of a better deal!
5 point 2 point 4. my man!! thank you for keeping it real.👍
Woot woot!
Finally a Pioneer Avr review!! I have the Elite SC LX904 and this thing is a beast!! 😁😁 Hopefully the 905 will be released this year with Dirac or better yet Pioneer releases and Elite Processor. Hey Channa does that 505 have seperate crossover setting for speakers or just one setting for all?? That's my one gripe with my 904. Hoping that changes with the 905.
Cool review. Hoping for some more offerings and reviews this year. I’m planning on replacing my lg c8 this year so I’ll also need a 4K/120 avr.
Oh nice! I have the LG C1 and it's pretty awesome!
My 505 just arrived! Waiting for my sub and all my acoustic panels so likely a couple weeks away from setting this up in the theater. This replaces the amazing Yamaha RX-V2700 that I got in 2007. Still a crazy amazing receiver with a killer amp...but needed the Atmos and ability so pass a video signal better than 1080i/720P to my new 4K projector.
Awesome! What is your new projector?
How does the Pioneer rcvr sound in comparison to your old Yamaha, I am also thinking about replacing my Yamaha 3900 with the LX-505. Yamaha always has that natural sound and the Pioneers used to have that more clinical sound like Dennon/Onkyo to me.
@@TechnoDad I got a great deal from Epson on the 3800 factory refurb with a 3 yr. warranty. I have everything now...just finishing painting and then will cover & install panels. Hopefully I'll be doing the fun stuff by next week. I don't want to install the projector and receiver because then I'll just sit and watch movies instead of finishing the room :).
Only able to externally power the surround heights 2? That seems like a really major flaw?
No, the requirement to got 7.1.4 is to externally power the surround back. You can externally power any speakers, but the ones you have to externally power for a 7.1.4 setup are the surround back.
@@TechnoDad thanks TechnoDad! Makes sense
Looking forward to your Dirac setup. Just got my 305 and working through it.
I've had this unit for about a month now and its been pretty flawless. Dirac was somewhat painful to get going but that was more on me learning the software. The question I have for anyone that has the receiver, have you had any issues with the remote out of the box? My factory remote doesn't work at all, contacted Just Audio and they sent me another remote and it didn't work as well. I made sure the IR receiver wasn't blocked and I did try switching the remote ID to all 3 options and never got it to work. I am able to control on the front end of the unit and can use the Pioneer App on my phone so I have a backstop, just would be nice to have the actual remote incase the Pioneer App ever goes down.
U need to put batteries in it
@@mullaway5746 yeah, made sure I did lol, used known good batteries. Ended up RMAing the unit, apparently it's an issue many are having. Normally wouldn't care but when you spend 1,500 on something I want it all to work even the smaller bits lol. My vendor had an Onkyo RZ50 which is what I really wanted so it all works put. I did reach out to Pioneer on it and they are aware of the issue coming up on units.
ส่วนตัวแล้วชอบ pioneer พอร์ตe.arcและเสียงatmos น่าจะมีการสังเคราะห์เสียง vitureatmos สำหรับลำโพงคู่หน้า กรณีย์มีแค่ลำโพงหน้า
Are the sub outputs independent? Said 9.2 on the front
I don’t think so, but I’d have to check…
No there not
@@glenn4452 ahhh that sucks! Would be the ultimate reciever if so! Will have to stick with my Marantz then!
@@tomdrums4607 Does your Marantz receiver have 2 different subwoofer output signal sources? This Pioneer VSX-LX505 has 2 RCA Sub outputs but they are mono (i.e. the same LFE).
@@TheSeabeeMan yes it does! I have the Marantz sr6010 and even though it is old now. It has completely independent sub outputs so you can correct them independently for the room. Looking to upgrade, but I must have the feature. Marantz have had it on their top three models for years now!
Channa- Seems like an awesome receiver! I look forward to hearing your experience with Dirac! :)
Thanks. I can't wait!
@@TechnoDad Yes, I'm really looking forward to your DIRAC LIVE video and experience with it, and if it's better than MCACC. Or if it's better to just manually fine-tune everything yourself without the help of those 2.
Hey Techno, Part 2? Great job on the Videos!
Thanks for that. How good of an amp/rec do I need to get the other 2 missing channels to complete a 7.2.4 setup? Can it be an old receiver? Will it degrade the sound of the other receiver?
If it's just to drive the 2 back surrounds, that would do ok for now.
Thanks for the Video Techno Dad, can't wait for the full review!
You and me both!
Your timing is impeccable!....I have this one incoming..( This Friday)....I am coming from a Onkyo NR809...was waiting for the RZ50.....delayed, not in stock...(Aint nobody got time for dat)....so this guy it is....a total redo as well..New Emotiva amp (I'm a huge fan) 4 new height/Atmos (existing system is 7.2.2)....cant wait!
Anxious to hear your review. Just got mine, but waiting for sub and acoustic panels before I setup and run the room correction. You'll likely be enjoying yours before me. Yeah man...I wanted the RZ50 too, but I don't think it exists :) Which Emotiva did you go with? I got the A-300 BasX for my living room powering my 4 ohm Axiom M80s. I LOVE that amp. For $400 its beautiful.
@@jonathanwilliams1974 Hey man.....yeah, cant wait!...I haven't really done any real refreshes of my basement system in a long time... Anyway, I'm adding an Emo Basx A3, to an already existing AMC 5 channel...I am a huge fan of Emo gear...I've owned a UMC-1, UMC 200, XMC 1, and my current XMC 2, along with a XPA5 and a Basx 150.....I am also an Onkyo fan (hence the NR809, and many other Onk's)....but I just couldn't wait any longer.....
Nice Briez! Yeah, I couldn't wait for the RZ50 either.
Great video ! I'm planning to set up a 7.2.4 system with front 3 channels powered by separate amp. Will the LX505 accomplish this? I'm concerned about your comment regarding only option is rear/heights to be externally amplified.
Hi! I think for a 7.1.4 setup to work, you will need to have a 5 channel amp. Power the front stage and the surround back with the external amp.
Just saved me some cash, i was hoping to power the front L/R with external amp... I guess I move on to another option that supports full 7.2.4
Why dont someone put up a video in RUclips for newbies like me about the need to upgrade to latest AV hardware? What do you get NEW now compared to a 5-10 year old AVR? I got a 5yr old Marantz which works fine but wondering why to upgrade other than higher sound output & 8K video?
Hi Gardens! That's a good idea. As for your 5 year old Marantz, you could be okay unless there is some feature that you are missing. Usually, I say 3 - 5 years is a good time to upgrade as there could have been substantial upgrades done in that time. If you bough an AVR last year, it's not worth it to upgrade this year.
@@TechnoDad Marantz NR1608 that I own is pretty decent for what I paid except for 50W & 4k. Streaming Amzn prime, Netflix, Sonyliv, Disney+ etc via Home Theatre PC (HTPC) powered by 4core i7/8Gb RAM/1TB Samsung 980Pro SSD/Nvidia GTX 2Gb GDDR5 HDMI connected to ARC HDMI of Marantz NR1608. Mated to BOSE ACOUSTIMASS V 5.1speakers. I do not know what NEW technologies do I get by upgrading other than higher Watts & 8K. Why should I upgrade? There are no such videos 🤷♂️
That is my next AVR. Cool to see that the 05 model has the same UI as my 04 model. No learning curve!
Hah! Easy enough, Kevin.
I jumped for the 505 and I love it. Replaced my SC-95. I also couldn’t find the Onkyo.
Nice!
Can’t wait for the review. Been contemplating ordering it from BB, b/c can’t find the RZ-50. My Onkyo TX-NR809 is still kicking, rocking a 7.2 setup w/ a BasX 3 channel rocking the fronts. Looking to add Atmos!
I upgraded from my Onkyo NR809 to the RZ50 and have been super super happy. The Pioneer and Integra will sound identical
I had in the early 2000s a Pioneer Elite 65 inch Tv. Just before hdmi came into play. Component cables.
Yeah, we still have a Fujitsu Plasma from 2002 and it is 720p with component input.
I had actually purchased this reciver but you can't individually set crossovers for speakers. It says all crossover for small speakers the same. Can you please verify
Sure thing! Is that for Mcacc or Dirac?
@@TechnoDad I think that is a generic setting that applies to both room eq systems.
@@TechnoDad this is why I returned it and was either waiting for the onkyo or see more information
@@triplerinse the Onkyo and Integra both allow crossovers by speaker groups. So you can do LR / C / Surrounds / Heights / Back surrounds etc. You're correct the Pioneer AVR has universal crossover for all speakers
You cannot set crossovers yourself. Your limited to like 80 120 and 150 I think. I returned the 305 for that reason and I thought the dsp sucked..even with Dirac. The all ch stereo produced an echo. It was painful to return an avr with full Dirac but music on my Sony avr sounded better. Truth. I was relieved to get my Sony hooked back up. The Pionneer surrounds just did not fill , even with cranking up the dB. I am still looking. .
What about the quality of the sound vs the others?
Dirac sounds pretty good
Dirac probably does help.. But is there a difference between them, raw an un conditioned? I for one am trying to choose between Onkyo, Pioneer and Denon AVR's.. Features and whistles aside.. I mean, there are fewer and fewer places that you can go in person and hear a receiver brand with a given a speaker brand.. Folks review features and Wattage etc... But rarely do they compare the Sound quality between the brands... Is there a sound quality difference between them?@@TechnoDad
@technoDad maybe you know why on LX-505 DTS virtual X is missing and in old version VSX-935 was?
I have the previous version I'm excited for the full review
Nice!
Do you know if airplay 2 will provide multiple destinations for different zones? I know this receiver can power up to three zones (with the third zone using an external amp), but I'm not sure if it will provide 3 different airplay channels to which different members of my house could access to play different music in different zones (or if all the zones have to play the same music if using airplay). Thanks!
What is the difference between the VSX-LX103 9.2 and VSX-LX505 9.2 - is it only the 20 watts per channel and is it necessary?
Hey Techno Dad great video. I'm having a hard time deciding on the Pioneer 505 or the Anthem MRX540. I think the Anthem would sound better but the Pioneer has more channels. Any advice would be great...and what do you do with all that A/V gear? Resell? Or what?
I had a cheap Pioneer 5.1 Receiver a while back that quit on me after a few years. I was hoping for better performance. I hope they stopped up their game here. This one is enticing with the specs. I might just have to buck up and buy it. I was hoping I'd get a 9+ channel one around $750-1,000 but that's looking like a pipe dream. It'd be nice to go from 5.1.2 to 5.1.4 speakers. Great video!
You could go with the lower model, the VSX-LX305. It has 9 channels and is a little cheaper, but I don't think you get 11 channel processing and pre-outs - amzn.to/3Fr7pAb
@@TechnoDad Thanks, at that point the VSX-LX505 sounds like a better option for the specs and pre-outs it has. Just have to buck up haha.
Hi I have the 503 elite and I do not have a separate amp for the rear height I am running a 7.1 and I have the fronts bi amped as pioneer has shown in the Manuel.
Dear all - i have the receiver now, but it seems not possible to put out audio from HDMI (eArc) to the main zone simultanious to zone 2. I have thought, when the signal is PCM, that should work. Does anyone know how I could reach this output?
Thank for the video. Interested in this unit but have a question about the 4 height speaker layout it supports. I have 4 in ceiling directional speakers that I want to use for heights. Two are above my listening positions and two are rear of my listening position. Does this receiver have a layout option for a top middle and top rear together? Thanks and looking forward to the future vids on this one.
i would like to know what you think of the dac?
i have the vsx-934 and have been very happy other than out puts and dirac how do they compare ?
i got it at end of its run new for $200
thanks again
Is it true you cannot change the crossovers with this unit?
Techno dad how does this compare to your Denon 4700 in terms of movie watching. Thank you.
Techo Dad Rocks!...Loved the receiver but had to return it due to IR sensor not working . I was also very disappointed with the quality of the remote controller. I think I'm just gonna wait for the RZ-50 since that one has Auro 3D and is $100 less.
I'm having a similar issue with the IR sensor not working, I can use the Pioneer app but not the remote.
the onkyo rz50 does not support auro 3d. There is a rumor that onkyo/pioneer are going to come out with a rz70 and a Lx705 that will support auro 3d, but there has been no official confirmation.
Are you by any chance going to review the Marantz AV8805A preamplifier? I’m thinking of purchasing one but I can’t seem to find any reviews on RUclips.
Sorry TechnoDad I didn’t get it: so is the problem that you lack true surround back sound in a side surround only set up? I didn’t get the “problem”?
im in the same boat lol I bough about 5 av receiver the last 4 years I sold my last pioneer lx504 for the denon x3700h and I regretted it so badly, ending up selling up the denon for the Yamaha rxa2080 and still missing the pioneer sound signature, ima wait for the sc 705 to come out, to me the pioneer sounded the best of all now with Dirac could just be better! ill be waiting for your full review on it, thanks
Another great video 🤯
Thank you!
On all of these mid level avr, that need to connect to the internet are they WiFi or do you have to connect them to a laptop?
That's a BEAST!!
I just got my Pioneer 505, but Dolby Vision isn’t working on 4K blurays that have Dolby Vision and HDR10+. The LG C1 switches to Dolby Vision, but the screen stays black. Do you have this same issue?
@Techno Dad
I have Yamaha RX-A6A and power Amp Emotiva is it possible use preout with powered in the same time
Example ( Powered Front L&R to speaker and preout front L&R to power amp )
Thanks in advance
I have found one for $600 open box but not be able to use an amp for just L/R and not be able to set crossover point push it away from me. I'd have to expend my money on the X3800h
Good video. I'd be interested in from where you got that subscribe animation. It's totally awesome! I also like your brand logo animation.
Oh! I got that from like video hive or someplace like that. I can’t remember, it was years ago. I’m glad you like it!
I have an older Pioneer LX89 that I was hoping I would be able to use in a 7.1.4 setup, and am getting new front speakers powered with a new 2 channel amplifier. Seeing this video has made me wonder if that would be possible now. I had hoped to get an Audiolab 8300A to power the fronts and the others powered by the Pioneer, but it seems now it would not be possible. Do you know if it's always been the case?
Hi TechnoDad. I just ordered my VSX-lx505 Elite receiver. This receiver has no ELITE written on it. And the display is not orange color. Are we being offered a different product in Switzerland ? Please advise
I have the Denon 3700H and I’m wondering would the pioneer elite LX 505 be a better receiver. I know Dirac is better then audyssey xt32 but is that worth it alone?
Hello Techno Dad, thanks for the video. Question since you own Anthem, Denon, and now Pioneer and possibly others. Is there a receiver you prefer especially since each has different room correction (Anthem room correction, Audessey, and Dirac). Any pros/cons would be greatly helpful as I am trying to decide between Marantz, Anthem, Onkyo/Pioneer
Guess not.
Hi 👋 dear, I wanted to know Does it have Pre output for connecting Active Speakers Beo Lab 9 ??? Is it possible to connect with the present output. I want a AVR with Pre output Which brand is available Very expensive ones is having and available. Please advise and reply. Wait for your reply. Sony , Denon , Onkyo , Pioneer, Marantz. I checked. Not expensive one ☝️.
Nice! I have been contemplating getting this to replace my sc-lx502 but I am still unsure about it.
Yeah, it's tough contemplating an upgrade.
I just bought this reciever and I'm new at these connections. My old Elite died on me (Digital Main Board). So I'm left with this setup (Front L/R, C, L/R Height, Surr L/R, and Rear Height L/R, and 2 subs. You video says I need a separate amp for the rear speakers. Which Pioneer amp do you recommend? Trying to keep it all Pioneer. Thanks in advance.
Hi! Yes, to run a 7.1.4 you will need a power amp for the surround back speakers. It sounds like you are running 5.1.4. Not sure if Pioneer make those, at least I don’t know of any.
You still liking the Pioneer Lx505? I’m thinking about moving from the Denon 3700h to the Pioneer for Dirac
Yeah! I’m still using it until I want Auro-3D back again. If you can try the Pioneer and see if you like it before returning or selling the Denon, that would be the thing to do.
hi techno dad i have a jamo dolby atmos set. which receiver is the best for the marantz 6015/7015 or denon 3700/4700
Seems like pioneer has always been less buggy than any Dennon has ever been. Ive been looking at the Dennon 6700 but I could get the pioneer with less problems and a 4 channel amp and be less expensive and be better than the Dennon. Thoughts ?
Yeah, that's a good plan. The only thing you are missing with that X6700H will be Auro-3D and 13 channels of processing. But, like you said, it's a lot cheaper to go with the LX505 and an external amp. Just remember that you'll need to externally power the surround back channels for a 7.1.4 setup with the Pioneer.
Hi Channa! After viewing your review on the Pioneer Elite VSX-LX505, I'm seriously considering this as my first choice along with the Onkyo TX-RZ50.. My only concern with the Pioneer Elite VSX- LX505 however, is the crossover frequencies for each speaker cannot be individually adjusted, where as the crossover frequencies for the Onkyo TX-RZ50 can be adjusted individually for each speaker.. Therefore, in your honest opinion, would you recommend the Pioneer Elite VSX-LX505 over the Onkyo TX-RZ50 or recommend the Onkyo TX-RZ50 over the Pioneer Elite VSX-LX505? Meanwhile, thanks for your feedback support in advance..
When do you plan on making the video with the remote manual calibration from Joe n Tell?
I hope to have it out next week. You can book a consultation here - bit.ly/JNTBook
Hey buddy nice video. No worries for you I hope brotha.
Yeah, it’s been tough but at least I have started walking slowly around the house.
@@TechnoDad I'm glad to hear my buddy is doing better. I'm up early that's why I always check you guys out on the Daily audio talk show. LOL.
I have two of these and they work fine.. when you use the mic for the MCACC just put the mic on the seat cushion of your couch and let it do its magic.... it does seem to not give the center channel enough volume but after you run the Auto MCACC you will want to fine tune the volume/speakers anyway... I also use the " Sub " HDMI output that is just a HDMI built in splitter and hook up the Smyth Realiser A16 when its just the wife and myself I can run that for 24 channel Atmos... I like to run 10.1.13 as its got great overhead support in that config...
Why would you use MCACC when the reason to get the new Pionkyogra AVR is for Dirac
@@leanderzulu3494 I'm talking about the initial setup routine thats built into the AVR... you just put the mic where you would sit while watching TV or listening to Music and let the routine run thru the steps for proper playback... it measures the speakers positions/levels and other items so it knows what you have hooked into it...
@@dixter1652 yes I understand. But the whole reason to buy the new Pioneer AVR is not to use MCACC but to use Dirac. Dirac is much better. It measures the speakers and the distances and levels way more accurately and does an amazing job of integrating everything so it sounds coherent
@@leanderzulu3494 watch the video again... at 4:15 is showing the setup... they call it MCACC ... after I ran the setup I go back and manually adjust to make it sound the way it should while sitting in my listening chair... it won't get any more accurate that way... I mostly listen to the A16 simply because its better for watching movies/TV with Dolby Atmos.... it simulates 24 channels of speakers that the Pioneer never could
@@dixter1652 This Pioneer VSX-LX505 receiver has both MCACC and DIRAC LIVE. ...they are 2 different programs to calibrate your system.
Worth to buy?nay ,after merch with Onkyo, Pioneer didn't produce parts for replace, mine vsx322k still left at repair shop.
Crutches? Are you alright, sir?
Hope your doing well!! Could you give your thoughts on Sony producing PS4’s in 2022 after saying We Believe in Generations?
What's up Kapono? I'm not sure, I haven't heard anything.
@@TechnoDad Oh I see. Well thanks for the response and we you do get caught up on how Sony is dealing with PS5 shortage, please give your thoughts.
Hey there TechnoDad, not sure if you can verify this but can you look into whether this receiver can help eliminate the Atmos lag that LG TVs have with the latest Xbox consoles. I currently have a LG CX with a samsung Atmos soundbar running over eArc. I know it's a bit overkill but I'm hoping plugging the Xbox into the receiver and outputting to the soundbar and TV at the same time would help bypass the Atmos lag that currently happens over eArc.
I have the RZ50 which has the same internal components as the LX505 and Integra DRX 5.4 and Series X. I can tell you the Dolby Atmos lag is there. It's a known issue with Xbox unfortunately. I get around it by using DTS:X or 5.1 uncompressed
Thank you for the review, I have a Pioneer Elite VSX-45 and this LX505 is going to be a tremendous upgrade. I do need some insight I've seen reviews where the Denon X3700h has inputs for two subs and power them independently. My question is does the LX 505 do the same? I see on the back it has dual inputs for subs but in the past it treated dual subs as one. Thanks again for your feedback.
The LX505 and the Onkyo RZ50 and Integra DRX 5.4 along with all the other models in the respective brands do not have independent sub outs. Essentially it's a Y splitter of the subwoofer channel. If you have two subs or more you're going to want a MiniDSP to time align the subs before allowing Dirac to EQ them
@@leanderzulu3494 This is the exact question I have. Should we adjust the multiple subs with MiniDSP/REW before or after running Dirac? Are there merits to either method or is it pretty clear cut? My RZ50 is in the mail. Can’t wait 👍
I just picked up this receiver and I have the worst ground loop in history. It's not your usual 60hz hum but it's GPU related. If I plug in an RCA cable to another amp even if that device is not plugged in I get GPU noise across all of the speakers. Tried a cheater plug for testing and while it doesn't get rid of the noise it does help. If not using a cheater plug the noise is pretty unbearable. I didn't have this issue with my Denon X3600H. Sadly I'll be returning this.
That's a shame. Yeah, I would recommend the ground lift plug, but I'm not sure what the issue could be. I am not getting that kind of an issue on mt system.
Hello, have you had any issues with lg c1 or cx having hdmi arc issues with newer receivers? I was looking to upgrade to onkyo rz50 or elite 505. All of my cx and c1 have issues with earc. Have tried multiple fixes and different hdmis. After some research, it seems like this is a major problem with the lgs. I am stuck using digital optical for now. I am currently using pioneer elite sc 81. I have used arc before with other sets just fine.
Hi Rich! I have not had issues with ARC/eARC.
Chromecast Built-in does NOT work! Other than that, I love my LX-505
Question, if I have a movie on a USB 3.0 stick that is 4K & Dolby Atmos. If I plugged that into my LG C1 will it play in Atmos? My Pioneer Elite is connected to my TV via eARC. Any insight would be appreciated!
I'll have to check that out. Are you talking about 1:1 rips or something downloaded? There's a huge difference. I'm not sure the LG will play that, but I'll check both. Email me to follow up - TechnoDad55 at gmail dot com
nice one! pioneer waiting for all that hdmi 2.1 stuff to blow over, did they take care of it, i hope so. i like the remote control for pioneer, dimmer and tone controls is done
well.
just wondering on my denon x2600h, i ran setup mic, set my 5.1 speakers all small, then 80hz all speakers, lfe sub 120hz.... for music maybe choose flat , then adjust subwoofer db to taste?
Looks like I was wrong. HDMI inputs 1, 2, and 3 are 40 Gbps.
Not too bad with 3 ports, as long at least new gen consoles can fully handle.
Hi, how can I lock it? I don’t want other Person using it while I’m not home
thx
What dac is inside? Specification dosen't say anything about it
Appreciate the video. Does it allow for a 4.1.2 setup?
Yes! If by 4.1.2 you mean no center channel, I think it does that.
@@TechnoDad Yep that’s exactly what I mean. I figured it might but wanted to make sure. Thanks
I have the LX 801 is this the updated version of it? It's definitely cheaper but specs seem similar
No it's the update to the LX504.
Still waiting for my RZ50. Supposedly shipments arriving in a week 🤞
Fingers crossed!
I’m waiting for mine to come in also ordered it on January 06, supposed to be any day now LOL
I'm waiting for the LX705 given yamahas AxA flop this/last year.
Yeah, I'd have to agree!
Mahalo T.D!
Question…hat do you think of the Yamaha over the onkyo? RX -A1080
I’m not a huge fan of Yamaha right now. I have the A8A and it’s lacking in features for the price.
@@TechnoDad Mahalo Sir!!
Any information for Pioneer VSX-LX905 and release date ? Thank you
Nothing that I’ve heard of.
I have this receiver and love it so far. I can confirm 4K 120 Dolby Vision is working on the XBOX Series X. Can you help me with something though? Do you have the massive volume difference between stereo and surround sound sources? Or is it just my receiver? I know some volume difference is normal, but I'm listening to stereo sources on -40 or -35 and surround sources on -25 or -20, which means I have a delta of 15-20 levels of volume difference on the receiver. It's enough that if I forget to turn it down before switching to a stereo source, it blows my ears up. I've done DIRAC calibration, and my 5 main speakers in a 7.1.4 setup are externally amplified, so it seems like a processing issue vs a power one. I haven't found a setting that will help this, and I didn't have this issue on the Onkyo TX-NR797 it replaced.
You can use the Input Volume Absorber P140 of the manual. That will help each input to be closer to the same level, at the same volume dial setting.
@@smitty4ut that only works for different sources, not if that volume discrepancy happens with the same source on the same HDMI port.
I am really curious about the anthem mrx 1140. I know it’s more expensive. But would I be getting a much bigger upgrade for the extra money or am I better off with this pioneer? I don’t know how ARC stacks up against DIRAC LIVE
ARC (Anthem Room Correction) sounded great! it really made the system come alive and I have yet to try Dirac Live.
@@TechnoDad that’s the answer I am hoping for lol. I am wanting to get the anthem mrx1140 to power my Klipsch rf7iii LRC and move to a 7.2.4
a pioneer review alright
Yeah, it’s about time!
why did u choose pioneer over Onkyo ? im looking at getting LX105
Hi! I couldn't get an Onkyo and I saw the LX505 on Best Buy's so I picked up the Pioneer.
I keep coming back to this receiver, but no Auro-3D is a killer for me - especially after watching your videos and hearing how well the Auromatic upmixer works. Ugh
Yeah, I get that too! This has Dirac, but no Auro. It’s another $500 to get Auro but then lose Dirac. Decisions, decisions!
The next model up for both Onkyo (RZ-70) & Pioneer (LX705) should have it. Hopefully it comes out this spring??!!
@@danielallopenna2326 yup. Hopefully. I've been keeping an eye out. As soon as those are announced I'm placing a pre order and then I'm going to sell my RZ50
Do you need to externally power the rear height channels for a 5.1.4 setup?
No, you can run 9 channels out of the box. Either 5.1.4 or 7.1.2. If you want to run 11 channels, you will need an external power amp.
I wanna see if this thing is really good. I’m look to getting rid of the V6A . I just wanna see if this would be a better definet reason to buy this. On paper it looks like it definitely would be better. But let me know Techno dad!!!
I have the V6A and I would choose the LX505 - amzn.to/3nlWMIE - over the Yamaha. The Pioneer has more features and is more expensive.
@@TechnoDad How about sound Yamaha sound is different than Pioneer?
I wish they kept the old MCAAC Pro in their higher end, way more features than the MCAC advance like independent sub EQ and distance, Pro EQ with reverb measurements.
MCACC Pro is available on the 704 and 904, and will likely be offered when the new 705 and 905 will be released (which could take a while!).
Forget MCACC Pro or whatever. Dirac is the name of the game here.
@@leanderzulu3494 Have you tried DIRAC LIVE yourself?
Is it really better than MCACC?
@@TheSeabeeMan I have the Onkyo RZ50 which is identical to the Pioneer LX505 and Integra DRX 5.4 and Dirac is absolutely way better than MCACC / AccuEQ / Audyssey
@@leanderzulu3494 I have the Pioneer VSX-LX305 but haven't had time to try the DIRAC option yet. The receiver sounds really great with my current Manual settings. I'd hate to screw it up, although I suppose I could write down my settings and do a factory reset if DIRAC provides no improvement.
I don´t know what reciver I should to buy, if this pioneer or a Denon AVR-X4700H, specially fot the sound, I´m
in a dilemma
Out of those two options, I would go X4700H as it supports Auro-3D. It is a bit more expensive. I do have a few Denon in stock, email me - TechnoDad55 at gmail dot com
heheh nice to see a pioneer receiver again
I used to have the LX503, but got rid of it cause you can not set the individual crossovers, it is all or none. so if have all set to 80Hz they all have to be set to 80hz, but i found out on my Denon that my LR sound better set to 100Hz. Do you know if they changed this setting on the new 505, i do love that it has Dirac Live now.
I’ll have to check that out.
That is one of the differences between the LX505 and Onkyo RZ50. The Pioneer has universal crossovers so you have to use the same crossover for all speakers. The RZ50 and all the Onkyo AVR allow for crossovers by speaker groups. I have my LCR at 70Hz and surrounds at 100Hz. That's what Dirac set them to