Checked ours sds plus, and is missing that metal plate at all 😂 which holds bearing balls in place 😂 Could it be that it was lost or makers forgot to put it in ? Thanks great video.
mate very nice! but what is your opinon i have a very similar looking parkside hammer drill (probably a copy) and when i set it to hammer only (no rotation) it still rotates a bit slowly or stops, completely randomly. so you cannot make precise work with it, if you use any kind of flat chisel. you have to hold the chisel head with a glove. is pretty annoying. but looking at your video, this isnt the problem in the chuck...? what do you think? thx
Very good tutorial. I am missing grease type used - few brand names would help. I also think it would probably be worth degreasing the whole thing with a solvent. Great job and excellent idea with welding. Thanks. 👍
Mnie takie rzeczy psują się zawsze jak są potrzebne a części ciężko dostępne albo na zamówienie .Od ręki nie ma. Fajnie pokazane.👏👍
Wież mi nie tylko ty tak masz😉
Checked ours sds plus, and is missing that metal plate at all 😂 which holds bearing balls in place 😂 Could it be that it was lost or makers forgot to put it in ? Thanks great video.
Thank you. If there is the same handle, it is very strange that it is not there. Unless it fell to pieces and fell out somehow.
mate very nice! but what is your opinon i have a very similar looking parkside hammer drill (probably a copy) and when i set it to hammer only (no rotation) it still rotates a bit slowly or stops, completely randomly. so you cannot make precise work with it, if you use any kind of flat chisel. you have to hold the chisel head with a glove. is pretty annoying. but looking at your video, this isnt the problem in the chuck...? what do you think? thx
It's hard for me to say what it might be without seeing it. You'll have to take it apart and find the cause.
You can but that kit for $10
I'm not saying it isn't. But you can fix it yourself. I did it and it still works.
Super sprawa już się biorę do roboty. Taki sam mam problem. Tylko gdzie ja schowałem Bosha?
😉
Got same problem (your a genius)
This is a common problem with these handles
👍
😉
Thank you for the video, save me tons of time.🙂🙂
No problem
Pięknie jaj ZAAWSZE zrobiony tutorial :)
😉
Thanks kam ho gaya bhai
👍
😊❤❤😊😊❤❤😊❤😊١😊😊😊😊😊😊😊😊١😊😊😊😊😊@@pureexpanse
Very good tutorial. I am missing grease type used - few brand names would help. I also think it would probably be worth degreasing the whole thing with a solvent. Great job and excellent idea with welding. Thanks. 👍
Thank you.
Thank you for the video, helped me, had the same problem.
I'm glad I helped. Thank you for your comment
Super, że pokazałeś jak działa ten mechanizm blokujący no i brawa za regenerację elementu💪💪
Dzięki.Może się komuś przyda.
ta bajer, tylko nie kazdy ma tiga :(
@@damiannora6173 ale może już zna się kogoś kto ma tiga 😁
@@efektmurowany No wlansnie nie bardzo, bo inaczej bym nie marudzil.
@@damiannora6173 i co ja mam począć z tą informacją? Rusz się i poszukaj kogoś z tigiem w pobliżu, przecież nikt za Ciebie tego nie zrobi majster 😉😉👌
Świetna robota jak zwykle !!
Dzięki😉
super,, tu ma sauver
Thank you.😉
How do I get you more upvotes and subscribers, I'm a nobody but thank you very much?