i have a problem. when i start the game there is initializing model and the initializing is very slow.After about 10 minutes(11%) its closing by itself .What can i do ?
Nice where can i download the Teknoparro 0.7 loader any links? Can this loader play Undernight in birth or any games that run on Sega RingEdge machines?
Thanks! Links are in the description. As for the game you mentioned i have no idea if it works. Here's some links that will be of use: www.emuline.org/topic/819-sega-ringedgeringwide-etc-wip-teknoparrot-071-publique/ teknogods.com/phpbb/viewtopic.php?f=83&t=38604&sid=7546ee7899ff23d8fc41f17b1cc51ee4 8ch.net/1cc/index.html
Changing the resolution through your monitor with DSR won't make any difference because the game uses it's own internal resolution. You can only change it via the custom resolution folder by choosing 3840x2160 then x4 with renderer.ini
anyone knows what the deal is with those non stop commercials at the side of the road in nearly every initial d game? was the money needed so hard to ruin some of the immersion?
I think it depends on the resolution. You can try this custom resolution pack i found by chap called Elratauru mega.nz/#!iMp1FSDQ!dQzRaQUdm2bziM_UFbUW1vRYHpUgvXNkwZVPaEN3oys Go to your Initial D AA /id6 folder Then copy & paste any of the (id6_dump_ & initialD) from the custom resolution folder into: Initial D AA/id6 folder. Same goes with (renderer.ini Resolution). Copy & paste the corresponding (renderer) from the (renderer.ini Resolution) folder into Initial D AA/id6 folder.
I'm InTheMaking You're welcome. It's used to help render the game in the correct resolution or near enough to it. So for example, if you choose 1920x1080 from the custom res folder, you would then choose x2 from renderer ini folder. x2 is more or less 1920x1080.
I was using a custom resolution pack that i found from a chap called Elratauru mega.nz/#!iMp1FSDQ!dQzRaQUdm2bziM_UFbUW1vRYHpUgvXNkwZVPaEN3oys Go to your Initial D AA /id6 folder Then copy & paste any of the (id6_dump_ & initialD) from the custom resolution folder into: Initial D AA/id6 folder. Same goes with (renderer.ini Resolution). Copy & paste the corresponding (renderer) from the (renderer.ini Resolution) folder into Initial D AA/id6 folder. There's only a few games that work so far: www.emuline.org/topic/819-sega-ringedgeringwide-etc-wip-teknoparrot-071-publique/
Would you consider making a video on how to set this up? I've been waiting so long for this and it looks amazing, but Teknoparrot looks really intimidating
Zarrex There's a Spanish tutorial in the description. Its the only one around right now but it's pretty straightforward. I used it myself. Just follow what he does and you should be fine.
StrikerTC1 I actually got it working right after I commented, only problem I'm having now is that when I load in, I am scrolling to the left and cant make it stop.
Ok kool. What version of Teknoparrot are you using? Just tested it and found out that when using Teknoparrot 0.71, the cars will keep scrolling to the left. Must be a bug or something. Works fine with 0.7
hey, would you mind helping me out into trying to run this game? I have a GTX 1050 and an i7 4790 and I keep getting an error. "Error 6401: JVS I/O board is not connected to the main board"
yup that fixed it.. Thank You so much. It never clicked on me that I was suppose to run "ADMIN" even when it clearly said I should lol.. HOw were you able to fix the controls and resolution though? My car keeps shifting to the right. LOL. I am using a controller..
You're welcome. I didn't have to do much with the controls. I just configured it and it worked straight away. Are you using Teknoparrot 0.71? That is supposed to address issues with the controls. As for the resolution, i was using a custom resolution pack: mega.nz/#!iMp1FSDQ!dQzRaQUdm2bziM_UFbUW1vRYHpUgvXNkwZVPaEN3oys Go to your Initial D AA / id6 folder Then copy & paste any of the (id6_dump_ & initialD) from the custom resolution folder into: Initial D AA / id6 folder. Same goes with (renderer.ini Resolution). Copy & paste the corresponding (renderer) from the (renderer.ini Resolution) folder into Initial D AA / id6 folder.
Yup. I actually used the link that you posted up. Everything works as it should but the left thumb stick for steering is tricky. after trying a lot of variations, i placed it as "LeftThumbX-" so it would steer correctly but still, the car would always merge to the right even when im not steering anyway.. so weird.. hehe
![Chino Pacas - Smith (ft. Junior H & Fuerza Regida) [Video Visualizador Oficial]](http://i.ytimg.com/vi/BVK6k56X30Y/mqdefault.jpg)
i have a problem. when i start the game there is initializing model and the initializing is very slow.After about 10 minutes(11%) its closing by itself .What can i do ?
my favorite arcade game :D
Link in description if you want to download it.
hi is there any solution to immediate "Game Over" after one game?
turn on test menu>launch game>go to close settings>set all time
for some reason the mini map is blocking my whole screen game runs fine but its annoying to see the map i rather not have it on
Nice where can i download the Teknoparro 0.7 loader any links? Can this loader play Undernight in birth or any games that run on Sega RingEdge machines?
Thanks! Links are in the description.
As for the game you mentioned i have no idea if it works. Here's some links that will be of use:
www.emuline.org/topic/819-sega-ringedgeringwide-etc-wip-teknoparrot-071-publique/
teknogods.com/phpbb/viewtopic.php?f=83&t=38604&sid=7546ee7899ff23d8fc41f17b1cc51ee4
8ch.net/1cc/index.html
i cant find the link for the game can you send it to me the 8ch link has a bunch of dumps for other games
The link for it was never removed. You can download it in the description.
Hope they fix the keyboard controls....
what resolution file to put for 1920x1080? i 1x to 5x and idk which
x2 is for 1920x1080
thanks, what about 4k? wanted to see if 4k via DSr would kill any jagged edges
Changing the resolution through your monitor with DSR won't make any difference because the game uses it's own internal resolution. You can only change it via the custom resolution folder by choosing 3840x2160 then x4 with renderer.ini
is there a way to stop dmubjvsmanger from crashing?
Can you set up a DFGT or any kind of racing wheel?
Watch this tutorial: ruclips.net/video/f5RjNEuT0eE/видео.html
anyone knows what the deal is with those non stop commercials at the side of the road in nearly every initial d game? was the money needed so hard to ruin some of the immersion?
Is it me or does it feel fast when in bumper camera? I feel like Im zooming
I think it depends on the resolution. You can try this custom resolution pack i found by chap called Elratauru
mega.nz/#!iMp1FSDQ!dQzRaQUdm2bziM_UFbUW1vRYHpUgvXNkwZVPaEN3oys
Go to your Initial D AA /id6 folder
Then copy & paste any of the (id6_dump_ & initialD) from the custom resolution folder into: Initial D AA/id6 folder.
Same goes with (renderer.ini Resolution). Copy & paste the corresponding (renderer) from the (renderer.ini Resolution) folder into Initial D AA/id6 folder.
thanks for this! very handy....what's the renderer for again?
I'm InTheMaking You're welcome.
It's used to help render the game in the correct resolution or near enough to it. So for example, if you choose 1920x1080 from the custom res folder, you would then choose x2 from renderer ini folder. x2 is more or less 1920x1080.
Can it emulate the card reader?
No, not at the moment.
How do i make it look that good and where can i find other games. Holy crap its amazing
I was using a custom resolution pack that i found from a chap called Elratauru
mega.nz/#!iMp1FSDQ!dQzRaQUdm2bziM_UFbUW1vRYHpUgvXNkwZVPaEN3oys
Go to your Initial D AA /id6 folder
Then copy & paste any of the (id6_dump_ & initialD) from the custom resolution folder into: Initial D AA/id6 folder.
Same goes with (renderer.ini Resolution). Copy & paste the corresponding (renderer) from the (renderer.ini Resolution) folder into Initial D AA/id6 folder.
There's only a few games that work so far: www.emuline.org/topic/819-sega-ringedgeringwide-etc-wip-teknoparrot-071-publique/
Whenever I try to launch the game, I get a "Failed to load DLL!" message in the console. What am I doing wrong?
Meepergon you have to run the app using id6_dump_.exe
alright, now when i run that, the screen flashes black as if there's a game about to go fullscreen and then it goes back to my desktop.
Meepergon what graphics card are you using?
Nvidia GTX 860M
Ok kool.
Have you tried Auto setup JVS emulation ports in settings? or setup_com0com_W7 in the com0com folder?
Hay alguna forma de hacerlo correr con gráficos Intel?
any way to make it work with keyboard?
Do you need a wheel? Or can I use a controller?
It has support for both but i used a controller. I don't own a wheel so can't say if it works or not.
Is it possible to run this game in windowed mode or something? That way, I can record it properly.
the rom please
How change the resolution ?
Thanks!
Blackened Gaming You're welcome and thanks for your tutorial. 👍
how do you make it work with keyboard or steam controller
Would you consider making a video on how to set this up? I've been waiting so long for this and it looks amazing, but Teknoparrot looks really intimidating
Zarrex There's a Spanish tutorial in the description. Its the only one around right now but it's pretty straightforward. I used it myself. Just follow what he does and you should be fine.
StrikerTC1 I actually got it working right after I commented, only problem I'm having now is that when I load in, I am scrolling to the left and cant make it stop.
Ok kool.
What version of Teknoparrot are you using? Just tested it and found out that when using Teknoparrot 0.71, the cars will keep scrolling to the left. Must be a bug or something.
Works fine with 0.7
StrikerTC1 Was using the one you had available for download, is there anything I would be missing if I went back to .7?
Zarrex Everything is all the same.
0.7 is already included within the Initial D folder. Just set it up the same way as you did with 0.71
Thank you!!
where do i find the ID dump.exe
Initial D 6 AA/id6/id6_dump_
im using 7zip and i get 2 errors when extracting the game
its the Course.XAF to be specific and i tried winrar and repairing the file too
nvm got the game extracted but now i have this scrolling issue
Scrolling issue? What do you mean
Mày có biết slen là ai? What you can at slender man
hey, would you mind helping me out into trying to run this game? I have a GTX 1050 and an i7 4790 and I keep getting an error. "Error 6401: JVS I/O board is not connected to the main board"
Did you try: Auto setup JVS emulation ports?
yup that fixed it.. Thank You so much. It never clicked on me that I was suppose to run "ADMIN" even when it clearly said I should lol..
HOw were you able to fix the controls and resolution though? My car keeps shifting to the right. LOL. I am using a controller..
You're welcome.
I didn't have to do much with the controls. I just configured it and it worked straight away. Are you using Teknoparrot 0.71? That is supposed to address issues with the controls.
As for the resolution, i was using a custom resolution pack:
mega.nz/#!iMp1FSDQ!dQzRaQUdm2bziM_UFbUW1vRYHpUgvXNkwZVPaEN3oys
Go to your Initial D AA / id6 folder
Then copy & paste any of the (id6_dump_ & initialD) from the custom resolution folder into: Initial D AA / id6 folder.
Same goes with (renderer.ini Resolution). Copy & paste the corresponding (renderer) from the (renderer.ini Resolution) folder into Initial D AA / id6 folder.
Yup. I actually used the link that you posted up. Everything works as it should but the left thumb stick for steering is tricky. after trying a lot of variations, i placed it as "LeftThumbX-" so it would steer correctly but still, the car would always merge to the right even when im not steering anyway.. so weird.. hehe
carlogz Try 0.7 instead.
It's located within the Initial D folder.
I noticed that 0.71 has a bug causing the steering to go haywire.
Hopefully works on AMD GPUs :)
3:29 what's the name of this son
No idea mate
black screen help
Did you run: setup_com0com_W7 in the com0com folder?
Either 64bit or 32bit depending on your pc.
If you're still having issues please follow this guide here.
forum.arcadecontrols.com/index.php/topic,154238.0.html
Also make sure to launch the game through Teknoparott and run DumbJVSManager.exe as admin.
i already fix the problem
i run DumbJVSManager.exe as graphic processor
thx btw =]
Ok kool 👍
There’s no Sadam ine xd
Only 10 lvls
trojan